[PATCH] [libata] Set proper ATA UDMA mode for bf548 according to system clock.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



UDMA Mode - Frequency compatibility

UDMA5 - 100 MB/s   - SCLK  = 133 MHz
UDMA4 - 66 MB/s    - SCLK >=  80 MHz
UDMA3 - 44.4 MB/s  - SCLK >=  50 MHz
UDMA2 - 33 MB/s    - SCLK >=  40 MHz


Signed-off-by: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
---
 drivers/ata/pata_bf54x.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 81db405..088a41f 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1489,6 +1489,8 @@ static int __devinit bfin_atapi_probe(st
 	int board_idx = 0;
 	struct resource *res;
 	struct ata_host *host;
+	unsigned int fsclk = get_sclk();
+	int udma_mode = 5;
 	const struct ata_port_info *ppi[] =
 		{ &bfin_port_info[board_idx], NULL };
 
@@ -1507,6 +1509,11 @@ static int __devinit bfin_atapi_probe(st
 	if (res == NULL)
 		return -EINVAL;
 
+	while (bfin_port_info[board_idx].udma_mask>0 && udma_fsclk[udma_mode] > fsclk) {
+		udma_mode--;
+		bfin_port_info[board_idx].udma_mask >>= 1;
+	}
+
 	/*
 	 * Now that that's out of the way, wire up the port..
 	 */
-- 
1.4.3.4


-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux