Phillip Susi wrote: > Tejun Heo wrote: >> Agreed. Nobody cared on ATA controllers is usually very effective at >> taking the whole machine down. Is there any reason why we don't turn on >> irqpoll on turned off IRQs automatically? > > Why does a single spurious interrupt cause it to be shut down? I can > see if the interrupt is stuck on and keeps interrupting constantly, but > if it's just the occasional spurious interrupt, why not just ignore it > and move on? Because SFF ATA controller don't have IRQ pending bit. You don't know whether IRQ is raised or not. Plus, accessing the status register which clears pending IRQ can be very slow on PATA machines. It has to go through the PCI and ATA bus and come back. So, unconditionally trying to clear IRQ by accessing Status can incur noticeable overhead if the IRQ is shared with devices which raise a lot of IRQs. -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
