Re: 2.6.24-rc3-mm1: I/O error, system hangs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 24.11.2007 14:26, James Bottomley a écrit :
> On Sat, 2007-11-24 at 13:57 +0100, Laurent Riffard wrote:
>> Le 24.11.2007 07:42, James Bottomley a écrit :
>>> On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
>>>> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
[snip]
>>>> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 
>>>> does fix the problem.
>>>>
>>>>>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
>>>>>> I shouldn't. Checking ...
>>>>>>
>>>>> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
>>>>> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
>>>> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
>>> I think the problem is the way we treat BLOCKED and QUIESCED (the latter
>>> is the state that the domain validation uses and which we cannot kill
>>> fastfail on).  It's definitely wrong to kill fastfail requests when the
>>> state is QUIESCE.
>>>
>>> This patch (which is applied on top of Hannes original) separates the
>>> BLOCK and QUIESCE states correctly ... does this fix the problem?
>>
>> No, it doesn't help... (2.6.24-rc3-mm1 + your patch still has problems)
> 
> OK, could you post dmesgs again, please.  I actually tested this with an
> aic79xx card, and for me it does cause Domain Validation to succeed
> again.

James, 

Here is a dmesg produced by 2.6.24-rc3-mm1 + your patch "separates the 
BLOCK and QUIESCE states correctly" (http://lkml.org/lkml/2007/11/24/8).

How to reproduce :
- boot
- switch to a text console
- capture dmesg in a file, sync, etc. There are 3 I/O errors, but the 
  system does work.
- switch to X console, log in the Gnome Desktop, the system partially 
  hangs.
- switch back to a text console: dmesg(1) still works, it shows some 
  additonal I/O errors. At this point, any disk access makes the system 
  completely hung.

Additionnal data:
- the I/O errors always happen on the same blocks.

-- 
laurent
[    0.000000] Linux version 2.6.24-rc3-mm1 (laurent@calimero) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #122 PREEMPT Fri Nov 23 18:47:58 CET 2007
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
[    0.000000]  BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
[    0.000000]  BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 511MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 131052) 0 entries of 256 used
[    0.000000] sizeof(struct page) = 32
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131052
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131052
[    0.000000] On node 0 totalpages: 131052
[    0.000000] Node 0 memmap at 0xC1000000 size 4194304 first pfn 0xC1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125965 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP 000F6A80, 0014 (r0 ASUS  )
[    0.000000] ACPI: RSDT 1FFEC000, 002C (r1 ASUS   A7V133-C 30303031 MSFT 31313031)
[    0.000000] ACPI: FACP 1FFEC080, 0074 (r1 ASUS   A7V133-C 30303031 MSFT 31313031)
[    0.000000] ACPI: DSDT 1FFEC100, 2CE1 (r1   ASUS A7V133-C     1000 MSFT  100000B)
[    0.000000] ACPI: FACS 1FFFF000, 0040
[    0.000000] ACPI: BOOT 1FFEC040, 0028 (r1 ASUS   A7V133-C 30303031 MSFT 31313031)
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130029
[    0.000000] Kernel command line: root=/dev/mapper/vglinux1-lv_ubuntu2 ro locale=fr_FR video=radeonfb:1280x1024@60 resume=/dev/mapper/vglinux1-lvswap
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffb000 (01406000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] CPU 0 irqstacks, hard=C03C2000 soft=C03C1000
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1410.216 MHz processor.
[   22.884407] Console: colour VGA+ 80x25
[   22.884416] console [tty0] enabled
[   22.886762] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[   22.886826] ... MAX_LOCKDEP_SUBCLASSES:    8
[   22.886874] ... MAX_LOCK_DEPTH:          30
[   22.886923] ... MAX_LOCKDEP_KEYS:        2048
[   22.886971] ... CLASSHASH_SIZE:           1024
[   22.887020] ... MAX_LOCKDEP_ENTRIES:     8192
[   22.887067] ... MAX_LOCKDEP_CHAINS:      16384
[   22.887115] ... CHAINHASH_SIZE:          8192
[   22.887164]  memory used by lock dependency info: 992 kB
[   22.887214]  per task-struct memory footprint: 1200 bytes
[   22.887265] ------------------------
[   22.887312] | Locking API testsuite:
[   22.887358] ----------------------------------------------------------------------------
[   22.887422]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[   22.887484]   --------------------------------------------------------------------------
[   22.887557]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.889187]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.890642]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.892120]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.893598]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.895101]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.896609]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.898121]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.899557]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.900996]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[   22.902460]   --------------------------------------------------------------------------
[   22.902523]               recursive read-lock:             |  ok  |             |  ok  |
[   22.903128]            recursive read-lock #2:             |  ok  |             |  ok  |
[   22.903732]             mixed read-write-lock:             |  ok  |             |  ok  |
[   22.904337]             mixed write-read-lock:             |  ok  |             |  ok  |
[   22.904945]   --------------------------------------------------------------------------
[   22.905009]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[   22.905772]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[   22.906532]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[   22.907291]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[   22.908049]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[   22.908809]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[   22.909568]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[   22.910327]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[   22.911086]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[   22.911846]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[   22.912605]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[   22.913377]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[   22.914148]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[   22.914916]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[   22.915686]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[   22.916456]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[   22.917227]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[   22.917996]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[   22.918766]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[   22.919526]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[   22.920290]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[   22.921059]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[   22.921827]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[   22.922597]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[   22.923368]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[   22.924137]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[   22.924907]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[   22.925675]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[   22.926446]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[   22.927214]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[   22.927984]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[   22.928754]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[   22.929525]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[   22.930295]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[   22.931066]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[   22.931839]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[   22.932615]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[   22.933389]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[   22.934162]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[   22.934934]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[   22.935709]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[   22.936479]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[   22.937251]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[   22.938021]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[   22.938796]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[   22.939568]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[   22.940341]       hard-irq read-recursion/123:  ok  |
[   22.940652]       soft-irq read-recursion/123:  ok  |
[   22.940963]       hard-irq read-recursion/132:  ok  |
[   22.941274]       soft-irq read-recursion/132:  ok  |
[   22.941587]       hard-irq read-recursion/213:  ok  |
[   22.941897]       soft-irq read-recursion/213:  ok  |
[   22.942208]       hard-irq read-recursion/231:  ok  |
[   22.942518]       soft-irq read-recursion/231:  ok  |
[   22.942829]       hard-irq read-recursion/312:  ok  |
[   22.943139]       soft-irq read-recursion/312:  ok  |
[   22.943450]       hard-irq read-recursion/321:  ok  |
[   22.943759]       soft-irq read-recursion/321:  ok  |
[   22.944071] -------------------------------------------------------
[   22.944126] Good, all 218 testcases passed! |
[   22.944174] ---------------------------------
[   22.944870] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   22.945989] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   22.969934] Memory: 510792k/524208k available (1734k kernel code, 12768k reserved, 883k data, 184k init, 0k highmem)
[   22.970014] virtual kernel memory layout:
[   22.970016]     fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
[   22.970019]     vmalloc : 0xe0800000 - 0xfffb3000   ( 503 MB)
[   22.970021]     lowmem  : 0xc0000000 - 0xdffec000   ( 511 MB)
[   22.970023]       .init : 0xc0390000 - 0xc03be000   ( 184 kB)
[   22.970025]       .data : 0xc02b18bc - 0xc038e504   ( 883 kB)
[   22.970027]       .text : 0xc0100000 - 0xc02b18bc   (1734 kB)
[   22.970368] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   23.051065] Calibrating delay using timer specific routine.. 2824.37 BogoMIPS (lpj=5648753)
[   23.051383] Mount-cache hash table entries: 512
[   23.052131] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[   23.052147] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   23.052205] CPU: L2 Cache: 256K (64 bytes/line)
[   23.052255] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 00000000
[   23.052267] Intel machine check architecture supported.
[   23.052319] Intel machine check reporting enabled on CPU#0.
[   23.052376] Compat vDSO mapped to ffffe000.
[   23.052441] CPU: AMD Athlon(TM) XP 1600+ stepping 02
[   23.052557] Checking 'hlt' instruction... OK.
[   23.067300] Freeing SMP alternatives: 0k freed
[   23.067349] ACPI: Core revision 20070126
[   23.072552] Parsing all Control Methods:
[   23.072681] Table [DSDT](id 0001) - 356 Objects with 38 Devices 115 Methods 24 Regions
[   23.072782]  tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
[   23.072914] ACPI: setting ELCR to 0200 (from 0820)
[   23.073065] evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
[   23.074112] khelper used greatest stack depth: 3172 bytes left
[   23.074581] net_namespace: 76 bytes
[   23.075809] NET: Registered protocol family 16
[   23.077047] ACPI: bus type pci registered
[   23.079899] PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
[   23.080300] PCI: Using configuration type 1
[   23.080349] Setting up standard PCI resources
[   23.089819] khelper used greatest stack depth: 3064 bytes left
[   23.094177] evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
[   23.096633] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
[   23.096774] ACPI: EC: Look up EC in DSDT
[   23.100425] Completing Region/Field/Buffer/Package initialization:................................................
[   23.107399] Initialized 16/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes)
[   23.107501] Initializing Device/Processor/Thermal objects by executing _INI methods:
[   23.107592] Executed 0 _INI methods requiring 0 _STA executions (examined 41 objects)
[   23.107780] ACPI: Interpreter enabled
[   23.107830] ACPI: (supports S0 S1 S3 S4 S5)
[   23.108118] ACPI: Using PIC for interrupt routing
[   23.134108] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   23.135036] PCI quirk: region e200-e27f claimed by vt82c686 HW-mon
[   23.135123] PCI quirk: region e800-e80f claimed by vt82c686 SMB
[   23.135717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   23.287800] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   23.288493] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   23.289235] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   23.290017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   23.290844] Linux Plug and Play Support v0.97 (c) Adam Belay
[   23.291166] pnp: PnP ACPI init
[   23.291262] ACPI: bus type pnp registered
[   23.300586] pnp: PnP ACPI: found 14 devices
[   23.300648] ACPI: ACPI bus type pnp unregistered
[   23.302100] PCI: Using ACPI for IRQ routing
[   23.302153] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   23.327027] Time: tsc clocksource has been installed.
[   23.335311] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[   23.335371] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[   23.335430] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[   23.335496] system 00:00: iomem range 0xfffe0000-0xffffffff could not be reserved
[   23.335579] system 00:02: ioport range 0x3f0-0x3f1 has been reserved
[   23.335636] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[   23.335708] system 00:03: ioport range 0xe400-0xe47f has been reserved
[   23.335765] system 00:03: ioport range 0xe800-0xe80f has been reserved
[   23.368445] PCI: Bridge: 0000:00:01.0
[   23.368500]   IO window: d000-dfff
[   23.368551]   MEM window: b7000000-b7ffffff
[   23.368602]   PREFETCH window: b8000000-cfffffff
[   23.368677] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   23.368757] NET: Registered protocol family 2
[   23.403206] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   23.404092] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   23.404621] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[   23.406957] TCP: Hash tables configured (established 16384 bind 16384)
[   23.407128] TCP reno registered
[   23.420600] checking if image is initramfs... it is
[   23.870982] Switched to NOHz mode on CPU #0
[   23.918866] Freeing initrd memory: 3197k freed
[   23.919595] Simple Boot Flag at 0x3a set to 0x1
[   23.923543] io scheduler noop registered
[   23.923604] io scheduler anticipatory registered
[   23.923654] io scheduler deadline registered
[   23.923727] io scheduler cfq registered (default)
[   23.923792] Applying VIA southbridge workaround.
[   23.923845] PCI: VIA PCI bridge detected. Disabling DAC.
[   23.923898] PCI: Disabling Via external APIC routing
[   23.923989] Boot video device is 0000:01:00.0
[   23.925776] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   23.925837] PCI: setting IRQ 11 as level-triggered
[   23.925844] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   23.926143] radeonfb: Found Intel x86 BIOS ROM Image
[   23.926200] radeonfb: Retrieved PLL infos from BIOS
[   23.926252] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=166.00 MHz
[   23.926317] radeonfb: PLL min 20000 max 40000
[   24.006702] i2c-adapter i2c-1: unable to read EDID block.
[   24.130631] i2c-adapter i2c-1: unable to read EDID block.
[   24.254602] i2c-adapter i2c-1: unable to read EDID block.
[   24.378592] i2c-adapter i2c-3: unable to read EDID block.
[   24.502559] i2c-adapter i2c-3: unable to read EDID block.
[   24.626531] i2c-adapter i2c-3: unable to read EDID block.
[   24.890696] radeonfb: Monitor 1 type CRT found
[   24.890763] radeonfb: EDID probed
[   24.890810] radeonfb: Monitor 2 type no found
[   24.939657] Console: switching to colour frame buffer device 160x64
[   24.978303] radeonfb (0000:01:00.0): ATI Radeon Ya 
[   24.979794] input: Power Button (FF) as /class/input/input0
[   24.979882] ACPI: Power Button (FF) [PWRF]
[   24.980293] input: Power Button (CM) as /class/input/input1
[   24.980367] ACPI: Power Button (CM) [PWRB]
[   24.981341] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   24.981457] ACPI: Processor [CPU0] (supports 16 throttling states)
[   25.015443] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[   25.016038] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   25.016973] serio: i8042 KBD port at 0x60,0x64 irq 1
[   25.017057] serio: i8042 AUX port at 0x60,0x64 irq 12
[   25.018012] mice: PS/2 mouse device common for all mice
[   25.029741] Marking TSC unstable due to: possible TSC halt in C2.
[   25.030719] Time: acpi_pm clocksource has been installed.
[   25.039605] input: AT Translated Set 2 keyboard as /class/input/input2
[   25.054670] TCP cubic registered
[   25.054759] NET: Registered protocol family 1
[   25.054863] Using IPI Shortcut mode
[   25.056562] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[   25.058363] Freeing unused kernel memory: 184k freed
[   25.058540] Write protecting the kernel text: 1736k
[   25.058606] Write protecting the kernel read-only data: 700k
[   25.061832] busybox used greatest stack depth: 2900 bytes left
[   25.072401] exe used greatest stack depth: 2864 bytes left
[   25.175794] exe used greatest stack depth: 2652 bytes left
[   25.240831] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[   25.261513] consolechars used greatest stack depth: 2556 bytes left
[   25.483644] device-mapper: uevent: version 1.0.3
[   25.484060] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[   25.506481] SCSI subsystem initialized
[   25.517545] libata version 3.00 loaded.
[   25.520583] pata_via 0000:00:04.1: version 0.3.3
[   25.521256] scsi0 : pata_via
[   25.521711] scsi1 : pata_via
[   25.524089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[   25.524176] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[   25.683141] ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
[   25.683208] ata1.00: 78165360 sectors, multi 16: LBA 
[   25.683475] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[   25.684116] ata1.01: 160086528 sectors, multi 16: LBA 
[   25.691127] ata1.00: configured for UDMA/100
[   25.699142] ata1.01: configured for UDMA/100
[   26.170860] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
[   26.171562] ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr
[   26.330839] ata2.00: configured for UDMA/33
[   26.490828] ata2.01: configured for MWDMA2
[   26.503014] scsi 0:0:0:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
[   26.504670] scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
[   26.509842] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
[   26.511673] scsi 1:0:1:0: CD-ROM            E-IDE    CD-950E/AKU      A4Q  PQ: 0 ANSI: 5
[   26.513278] modprobe used greatest stack depth: 2152 bytes left
[   26.527262] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[   26.528154] sd 0:0:0:0: [sda] Write Protect is off
[   26.528961] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.529033] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.530146] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[   26.531224] sd 0:0:0:0: [sda] Write Protect is off
[   26.532082] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.532151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.533090]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[   26.581919] sd 0:0:0:0: [sda] Attached SCSI disk
[   26.583274] sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
[   26.584268] sd 0:0:1:0: [sdb] Write Protect is off
[   26.585211] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   26.585282] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.586508] sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
[   26.587530] sd 0:0:1:0: [sdb] Write Protect is off
[   26.588492] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   26.588564] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.589603]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
[   26.639851] sd 0:0:1:0: [sdb] Attached SCSI disk
[   26.641160] modprobe used greatest stack depth: 1964 bytes left
[   29.780014] Attempting manual resume
[   29.844555] ReiserFS: dm-10: found reiserfs format "3.6" with standard journal
[   29.845623] ReiserFS: dm-10: using ordered data mode
[   29.876338] ReiserFS: dm-10: journal params: device dm-10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   29.881733] ReiserFS: dm-10: checking transaction log (dm-10)
[   29.994198] ReiserFS: dm-10: Using r5 hash to sort names
[   29.995523] exe used greatest stack depth: 1620 bytes left
[   41.338877] Linux agpgart interface v0.102
[   41.365338] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[   41.455791] agpgart: AGP aperture is 256M @ 0xd0000000
[   41.639237] parport_pc: VIA 686A/8231 detected
[   41.639244] parport_pc: probing current configuration
[   41.639266] parport_pc: Current parallel port base: 0x378
[   41.639446] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   41.736002] parport_pc: VIA parallel port: io=0x378, irq=7
[   41.826262] usbcore: registered new interface driver usbfs
[   41.827814] usbcore: registered new interface driver hub
[   41.838329] usbcore: registered new device driver usb
[   41.842033] via686a 0000:00:04.4: Forcing ISA address 0xe200
[   41.843094] via686a 0000:00:04.4: Enabling sensors
[   41.857018] ACPI: I/O resource vt596_smbus [0xe800-0xe807] conflicts with ACPI region SM00 [0xe800-0xe806]
[   41.858112] ACPI: Device needs an ACPI driver
[   41.859147] vt596_smbus: probe of 0000:00:04.4 failed with error -16
[   41.874600] PCI: Enabling device 0000:00:09.0 (0014 -> 0016)
[   41.876608] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[   41.877642] PCI: setting IRQ 5 as level-triggered
[   41.877649] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[   41.892852] input: PC Speaker as /class/input/input4
[   41.941506] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[   41.958451] USB Universal Host Controller Interface driver v3.0
[   42.017891] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   42.032784] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   42.034064] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[   42.035203] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[   42.104236] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   42.105276] Uniform CD-ROM driver Revision: 3.20
[   42.123106] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   42.135665] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[   42.145075] Real Time Clock Driver v1.12ac
[   42.155668] sr 1:0:1:0: Attached scsi CD-ROM sr1
[   42.277609] Floppy drive(s): fd0 is 1.44M
[   42.299599] FDC 0 is a post-1991 82077
[   42.336396] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[b6800000-b68007ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[   42.376753] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[   42.392166] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   42.419779] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   42.467724] PCI: Enabling device 0000:00:0b.0 (0000 -> 0001)
[   42.470235] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   42.471237] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   42.474128] eth0: RealTek RTL-8029 found at 0x9400, IRQ 11, 00:40:95:46:6e:2d.
[   42.475610] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[   42.476711] uhci_hcd 0000:00:04.2: UHCI Host Controller
[   42.478965] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[   42.480365] uhci_hcd 0000:00:04.2: irq 5, io base 0x0000b400
[   42.482290] usb usb1: configuration #1 chosen from 1 choice
[   42.483685] hub 1-0:1.0: USB hub found
[   42.484993] hub 1-0:1.0: 2 ports detected
[   42.552689] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   42.554316] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   42.588475] usb usb1: new device found, idVendor=0000, idProduct=0000
[   42.589655] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
[   42.590616] usb usb1: Product: UHCI Host Controller
[   42.592260] usb usb1: Manufacturer: Linux 2.6.24-rc3-mm1 uhci_hcd
[   42.593218] usb usb1: SerialNumber: 0000:00:04.2
[   42.594289] ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[   42.595339] uhci_hcd 0000:00:04.3: UHCI Host Controller
[   42.596598] uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
[   42.597652] uhci_hcd 0000:00:04.3: irq 5, io base 0x0000b000
[   42.599191] usb usb2: configuration #1 chosen from 1 choice
[   42.600584] hub 2-0:1.0: USB hub found
[   42.601596] hub 2-0:1.0: 2 ports detected
[   42.704030] usb usb2: new device found, idVendor=0000, idProduct=0000
[   42.705073] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
[   42.706080] usb usb2: Product: UHCI Host Controller
[   42.707068] usb usb2: Manufacturer: Linux 2.6.24-rc3-mm1 uhci_hcd
[   42.708509] usb usb2: SerialNumber: 0000:00:04.3
[   42.811540] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   42.974026] usb 1-1: configuration #1 chosen from 1 choice
[   42.978609] hub 1-1:1.0: USB hub found
[   42.981379] hub 1-1:1.0: 4 ports detected
[   43.099312] usb 1-1: new device found, idVendor=05e3, idProduct=0606
[   43.100430] usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
[   43.101457] usb 1-1: Product: USB2.0 Hub
[   43.467102] PCI: Enabling device 0000:00:0d.0 (0004 -> 0005)
[   43.470645] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[   43.728051] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00308d0120e085ca]
[   59.341540] ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
[   59.341569] ReiserFS: dm-0: using ordered data mode
[   59.346608] ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   59.349822] ReiserFS: dm-0: checking transaction log (dm-0)
[   59.404729] ReiserFS: dm-0: Using r5 hash to sort names
[   59.614980] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[   59.616355] modprobe used greatest stack depth: 1552 bytes left
[   59.631731] reiser4: dm-5: found disk format 4.0.0.
[   59.890236] reiser4: dm-4: found disk format 4.0.0.
[   60.091592] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   60.091681] kjournald starting.  Commit interval 5 seconds
[   60.091911] EXT3 FS on sda5, internal journal
[   60.091989] EXT3-fs: mounted filesystem with ordered data mode.
[   60.216113] sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[   60.216124] end_request: I/O error, dev sda, sector 16460
[   60.245789] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[   60.245829] ReiserFS: sda7: using ordered data mode
[   60.251474] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   60.254845] ReiserFS: sda7: checking transaction log (sda7)
[   60.297870] ReiserFS: sda7: Using r5 hash to sort names
[   60.351096] sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[   60.351107] end_request: I/O error, dev sdb, sector 19632
[   60.392984] sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[   60.392995] end_request: I/O error, dev sdb, sector 40037363
[   60.611920] Adding 1048568k swap on /dev/mapper/vglinux1-lvswap.  Priority:-1 extents:1 across:1048568k
[   67.273626] lp0: using parport0 (interrupt-driven).
[   67.991472] [drm] Initialized drm 1.1.0 20060810
[   68.024210] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[   69.882699] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[   69.883411] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[   69.883933] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[   70.305388] [drm] Setting GART location based on new memory map
[   70.305410] [drm] Loading R200 Microcode
[   70.305452] [drm] writeback test succeeded in 1 usecs
[   70.920327] warning: process `avahi-daemon' sets w/ old libcap
[   70.927975] warning: process `avahi-daemon' sets w/ old libcap
[   70.931271] warning: process `avahi-daemon' sets w/ old libcap
[   70.945490] warning: process `avahi-daemon' sets w/ old libcap
[  323.784537] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[  323.784574] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[  323.784636] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[  323.784658] [drm] Loading R200 Microcode
[  334.964720] dmesg used greatest stack depth: 1292 bytes left

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux