Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hein-Pieter van Braam wrote:

Personally, I put all the disks in JBOD mode, but I never had these
disks connected to anything but my highpoint cards. Perhaps I should
tell you what my setup's like:

* In the system I've put 3 Highpoint RocketRaid 2300 cards.
* Two of the cards each have 4 Hitachi 750GB disks
* Each disk is put into JBOD mode in the 'Raid' Bios of the 2300
* On the drives I have 2 partitions, one 200MB partition and a partition
spanning the rest of the 750GB
* Both partitions are linux softraid
* /dev/md0 is a mirror of all 8 disks and serves as /boot (200MB)
* /dev/md1 contains an LVM volume that houses my other paritions (4.7TB)

Right now with 2.6.23.9 + patched sata_mv the softraid seems to come up
just fine but I pvscan is unable to locate the pv located on md1.

I'll try and make a bootable USB stick with my patched 2.6.23.9 and see
what the results are then.
..

How are you booting without the USB stick?
Are you booting from the Highpoint card drives?
What bootloader ?

Thanks
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux