sø., 18.11.2007 kl. 21.16 +0100, skrev Tomas Carnecky: > Since this is becoming more an IDE/ATA issue, I added > linux-ide@xxxxxxxxxxxxxxx to CC. I hope that's the right mailinglist. > > Tomas Carnecky wrote: > > (3) Once the notebook was in the docking station (whether I boot it > > while in the dock or boot it outside and then put it into the dock) and > > I take it out (press the 'undock' button on the dock, wait for the green > > led, then take out the notebook) things get interesting: > > > > (a) I initiate STR, notebook correctly goes to sleep, but it only wakes > > up if I have it in the docking station. If I try to wake it up outside > > of the docking station it will fail. > [snip str problem description] > ata4.00: ACPI cmd ef/03:45:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) > ata4: failed to recover some devices, retrying in 5 secs > Coming out of suspend... > [... snip ...] > ata4.00: ACPI cmd ef/03:45:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) > ata4.00: ACPI on devcfg failed the second time, disabling (errno=-5) > ata4.00: revalidation failed (errno=1) > ata4: failed to recover some devices, retrying in 5 secs > ata4.00: configured for UDMA/33 > I get this exact error message on a normal first time boot here. I'm using the latest fedora development kernel which is 2.6.24-rc2-git6 based. And I have the latest BIOS from HP IIRC. This is an HP nc6400 intel based laptop: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) ata1.00: ACPI on devcfg failed the second time, disabling (errno=-5) ata1.00: revalidation failed (errno=1) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk insmod used greatest stack depth: 596 bytes left lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01) 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21) 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 04:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) 04:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 04:06.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller Cheers Kjartan - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
