* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. Cc: Mikael Starvik <starvik@xxxxxxxx> Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Cc: Roman Zippel <zippel@xxxxxxxxxxxxxx> Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- Documentation/ide.txt | 9 +- drivers/ide/Kconfig | 26 ++++---- drivers/ide/Makefile | 64 +++++++++++--------- drivers/ide/arm/Makefile | 4 + drivers/ide/arm/ide_arm.c | 6 + drivers/ide/cris/Makefile | 2 drivers/ide/cris/ide-cris.c | 7 +- drivers/ide/h8300/Makefile | 2 drivers/ide/h8300/ide-h8300.c | 10 ++- drivers/ide/ide-pnp.c | 9 +- drivers/ide/ide-scan-pci.c | 11 +++ drivers/ide/ide.c | 131 ----------------------------------------- drivers/ide/legacy/Makefile | 19 ++++- drivers/ide/legacy/ali14xx.c | 5 - drivers/ide/legacy/buddha.c | 6 + drivers/ide/legacy/dtc2278.c | 5 - drivers/ide/legacy/falconide.c | 7 +- drivers/ide/legacy/gayle.c | 10 ++- drivers/ide/legacy/ht6560b.c | 5 - drivers/ide/legacy/macide.c | 8 +- drivers/ide/legacy/q40ide.c | 7 +- drivers/ide/legacy/qd65xx.c | 5 - drivers/ide/legacy/umc8672.c | 5 - drivers/ide/pci/Makefile | 4 + drivers/ide/pci/cmd640.c | 8 +- drivers/ide/ppc/Makefile | 3 drivers/ide/ppc/mpc8xx.c | 6 + drivers/ide/ppc/pmac.c | 2 drivers/ide/setup-pci.c | 9 +- include/linux/ide.h | 3 30 files changed, 174 insertions(+), 224 deletions(-) Index: b/Documentation/ide.txt =================================================================== --- a/Documentation/ide.txt +++ b/Documentation/ide.txt @@ -30,7 +30,7 @@ *** *** The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT* *** automatically detected by Linux. For safe, reliable operation with such -*** interfaces, one *MUST* use the "ide0=cmd640_vlb" kernel option. +*** interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option. *** *** Use of the "serialize" option is no longer necessary. @@ -292,9 +292,6 @@ The following are valid ONLY on ide0, wh to the first ATA interface found on the particular host, and the defaults for the base,ctl ports must not be altered. - "ide0=cmd640_vlb" : *REQUIRED* for VLB cards with the CMD640 chip - (not for PCI -- automatically detected) - "ide=doubler" : probe/support IDE doublers on Amiga There may be more options than shown -- use the source, Luke! @@ -310,6 +307,10 @@ i.e. to enable probing for ALI M14xx chi * "probe" module parameter when ali14xx driver is compiled as module ("modprobe ali14xx probe") +Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb" +kernel paremeter to enable probing for VLB version of the chipset (PCI ones +are detected automatically). + ================================================================================ IDE ATAPI streaming tape driver Index: b/drivers/ide/Kconfig =================================================================== --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -325,7 +325,7 @@ config BLK_DEV_PLATFORM If unsure, say N. config BLK_DEV_CMD640 - bool "CMD640 chipset bugfix/support" + tristate "CMD640 chipset bugfix/support" depends on X86 ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and @@ -359,7 +359,7 @@ config BLK_DEV_CMD640_ENHANCED Otherwise say N. config BLK_DEV_IDEPNP - bool "PNP EIDE support" + tristate "PNP EIDE support" depends on PNP help If you have a PnP (Plug and Play) compatible EIDE card and @@ -783,7 +783,7 @@ config BLK_DEV_CELLEB endif config BLK_DEV_IDE_PMAC - bool "Builtin PowerMac IDE support" + tristate "Builtin PowerMac IDE support" depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y help This driver provides support for the built-in IDE controller on @@ -837,7 +837,9 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ depends on BLK_DEV_IDE_AU1XXX config IDE_ARM - def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) + tristate "ARM IDE support" + depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) + default y config BLK_DEV_IDE_ICSIDE tristate "ICS IDE interface support" @@ -869,7 +871,7 @@ config BLK_DEV_IDE_BAST Simtec BAST or the Thorcom VR1000 config ETRAX_IDE - bool "ETRAX IDE support" + tristate "ETRAX IDE support" depends on CRIS && BROKEN select BLK_DEV_IDEDMA help @@ -903,14 +905,14 @@ config ETRAX_IDE_G27_RESET endchoice config IDE_H8300 - bool "H8300 IDE support" + tristate "H8300 IDE support" depends on H8300 default y help Enables the H8300 IDE driver. config BLK_DEV_GAYLE - bool "Amiga Gayle IDE interface support" + tristate "Amiga Gayle IDE interface support" depends on AMIGA help This is the IDE driver for the Amiga Gayle IDE interface. It supports @@ -941,7 +943,7 @@ config BLK_DEV_IDEDOUBLER runtime using the "ide=doubler" kernel boot parameter. config BLK_DEV_BUDDHA - bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" + tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" depends on ZORRO && EXPERIMENTAL help This is the IDE driver for the IDE interfaces on the Buddha, @@ -953,7 +955,7 @@ config BLK_DEV_BUDDHA to one of its IDE interfaces. config BLK_DEV_FALCON_IDE - bool "Falcon IDE interface support" + tristate "Falcon IDE interface support" depends on ATARI help This is the IDE driver for the builtin IDE interface on the Atari @@ -962,7 +964,7 @@ config BLK_DEV_FALCON_IDE interface. config BLK_DEV_MAC_IDE - bool "Macintosh Quadra/Powerbook IDE interface support" + tristate "Macintosh Quadra/Powerbook IDE interface support" depends on MAC help This is the IDE driver for the builtin IDE interface on some m68k @@ -975,7 +977,7 @@ config BLK_DEV_MAC_IDE builtin IDE interface. config BLK_DEV_Q40IDE - bool "Q40/Q60 IDE interface support" + tristate "Q40/Q60 IDE interface support" depends on Q40 help Enable the on-board IDE controller in the Q40/Q60. This should @@ -983,7 +985,7 @@ config BLK_DEV_Q40IDE drive subsystem through an expansion card. config BLK_DEV_MPC8xx_IDE - bool "MPC8xx IDE support" + tristate "MPC8xx IDE support" depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE help This option provides support for IDE on Motorola MPC8xx Systems. Index: b/drivers/ide/Makefile =================================================================== --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -7,41 +7,37 @@ # Note : at this point, these files are compiled on all systems. # In the future, some of these should be built conditionally. # -# First come modules that register themselves with the core +# link order is important here EXTRA_CFLAGS += -Idrivers/ide -obj-$(CONFIG_BLK_DEV_IDE) += pci/ - ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o -ide-core-$(CONFIG_BLK_DEV_CMD640) += pci/cmd640.o - -# Core IDE code - must come before legacy +# core IDE code ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o -ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o -# built-in only drivers from arm/ -ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o - -# built-in only drivers from legacy/ -ide-core-$(CONFIG_BLK_DEV_BUDDHA) += legacy/buddha.o -ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += legacy/falconide.o -ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o -ide-core-$(CONFIG_BLK_DEV_MAC_IDE) += legacy/macide.o -ide-core-$(CONFIG_BLK_DEV_Q40IDE) += legacy/q40ide.o - -# built-in only drivers from ppc/ -ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o -ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o - -# built-in only drivers from h8300/ -ide-core-$(CONFIG_IDE_H8300) += h8300/ide-h8300.o - obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o + +ifeq ($(CONFIG_IDE_ARM), y) + ide-arm-core-y += arm/ide_arm.o + obj-y += ide-arm-core.o +endif + +obj-$(CONFIG_BLK_DEV_IDE) += legacy/ pci/ + +obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o + +ifeq ($(CONFIG_BLK_DEV_CMD640), y) + cmd640-core-y += pci/cmd640.o + obj-y += cmd640-core.o +endif + +obj-$(CONFIG_BLK_DEV_IDE) += cris/ ppc/ +obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o +obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o @@ -49,6 +45,20 @@ obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o -obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ mips/ -obj-$(CONFIG_BLK_DEV_HD) += legacy/ -obj-$(CONFIG_ETRAX_IDE) += cris/ +ifeq ($(CONFIG_BLK_DEV_IDECS), y) + ide-cs-core-y += legacy/ide-cs.o + obj-y += ide-cs-core.o +endif + +ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) + ide-platform-core-y += legacy/ide_platform.o + obj-y += ide-platform-core.o +endif + +obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ + +# old hd driver must be last +ifeq ($(CONFIG_BLK_DEV_HD), y) + hd-core-y += legacy/hd.o + obj-y += hd-core.o +endif Index: b/drivers/ide/arm/Makefile =================================================================== --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -3,4 +3,8 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icsi obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o +ifeq ($(CONFIG_IDE_ARM), m) + obj-m += ide_arm.o +endif + EXTRA_CFLAGS := -Idrivers/ide Index: b/drivers/ide/arm/ide_arm.c =================================================================== --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -24,7 +24,7 @@ # define IDE_ARM_IRQ IRQ_HARDDISK #endif -void __init ide_arm_init(void) +static int __init ide_arm_init(void) { ide_hwif_t *hwif; hw_regs_t hw; @@ -41,4 +41,8 @@ void __init ide_arm_init(void) ide_device_idx(idx); } + + return 0; } + +module_init(ide_arm_init); Index: b/drivers/ide/cris/Makefile =================================================================== --- a/drivers/ide/cris/Makefile +++ b/drivers/ide/cris/Makefile @@ -1,3 +1,3 @@ EXTRA_CFLAGS += -Idrivers/ide -obj-y += ide-cris.o +obj-$(CONFIG_IDE_ETRAX) += ide-cris.o Index: b/drivers/ide/cris/ide-cris.c =================================================================== --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -754,8 +754,7 @@ static void cris_set_dma_mode(ide_drive_ cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); } -void __init -init_e100_ide (void) +static int __init init_e100_ide(void) { hw_regs_t hw; int ide_offsets[IDE_NR_PORTS], h, i; @@ -823,6 +822,8 @@ init_e100_ide (void) cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0); ide_device_add(idx); + + return 0; } static cris_dma_descr_type mydescr __attribute__ ((__aligned__(16))); @@ -1056,3 +1057,5 @@ static void cris_dma_start(ide_drive_t * LED_DISK_READ(1); } } + +module_init(init_e100_ide); Index: b/drivers/ide/h8300/Makefile =================================================================== --- /dev/null +++ b/drivers/ide/h8300/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_IDE_H8300) += ide-h8300.o Index: b/drivers/ide/h8300/ide-h8300.c =================================================================== --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -84,7 +84,7 @@ static inline void hwif_setup(ide_hwif_t hwif->INSL = NULL; } -void __init h8300_ide_init(void) +static int __init h8300_ide_init(void) { hw_regs_t hw; ide_hwif_t *hwif; @@ -104,7 +104,7 @@ void __init h8300_ide_init(void) hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif == NULL) { printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); - return; + return -ENOMEM; } index = hwif->index; @@ -117,8 +117,12 @@ void __init h8300_ide_init(void) ide_device_add(idx); - return; + return 0; out_busy: printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n"); + + return -EBUSY; } + +module_init(h8300_ide_init); Index: b/drivers/ide/ide-pnp.c =================================================================== --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -75,12 +75,15 @@ static struct pnp_driver idepnp_driver = .remove = idepnp_remove, }; -void __init pnpide_init(void) +static int __init pnpide_init(void) { - pnp_register_driver(&idepnp_driver); + return pnp_register_driver(&idepnp_driver); } -void __exit pnpide_exit(void) +static void __exit pnpide_exit(void) { pnp_unregister_driver(&idepnp_driver); } + +module_init(pnpide_init); +module_exit(pnpide_exit); Index: b/drivers/ide/ide-scan-pci.c =================================================================== --- /dev/null +++ b/drivers/ide/ide-scan-pci.c @@ -0,0 +1,11 @@ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/ide.h> + +static int __init ide_scan_pci(void) +{ + return ide_scan_pcibus(); +} + +module_init(ide_scan_pci); Index: b/drivers/ide/ide.c =================================================================== --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -95,7 +95,7 @@ DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); #ifdef CONFIG_IDEPCI_PCIBUS_ORDER -static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */ +int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */ #endif int noautodma = 0; @@ -178,8 +178,6 @@ static void init_hwif_default(ide_hwif_t #endif } -extern void ide_arm_init(void); - /* * init_ide_data() sets reasonable default values into all fields * of all instances of the hwifs and drives, but only on the first call. @@ -1217,26 +1215,12 @@ static int __init match_parm (char *s, c return 0; /* zero = nothing matched */ } -#ifdef CONFIG_BLK_DEV_ALI14XX extern int probe_ali14xx; -extern int ali14xx_init(void); -#endif -#ifdef CONFIG_BLK_DEV_UMC8672 extern int probe_umc8672; -extern int umc8672_init(void); -#endif -#ifdef CONFIG_BLK_DEV_DTC2278 extern int probe_dtc2278; -extern int dtc2278_init(void); -#endif -#ifdef CONFIG_BLK_DEV_HT6560B extern int probe_ht6560b; -extern int ht6560b_init(void); -#endif -#ifdef CONFIG_BLK_DEV_QD65XX extern int probe_qd65xx; -extern int qd65xx_init(void); -#endif +extern int cmd640_vlb; static int __initdata is_chipset_set[MAX_HWIFS]; @@ -1452,11 +1436,8 @@ static int __init ide_setup(char *s) #endif #ifdef CONFIG_BLK_DEV_CMD640 case -14: /* "cmd640_vlb" */ - { - extern int cmd640_vlb; /* flag for cmd640.c */ cmd640_vlb = 1; goto done; - } #endif #ifdef CONFIG_BLK_DEV_HT6560B case -13: /* "ht6560b" */ @@ -1546,83 +1527,6 @@ done: return 1; } -extern void __init pnpide_init(void); -extern void __exit pnpide_exit(void); -extern void __init h8300_ide_init(void); -extern void __init mpc8xx_ide_probe(void); - -/* - * probe_for_hwifs() finds/initializes "known" IDE interfaces - */ -static void __init probe_for_hwifs (void) -{ -#ifdef CONFIG_IDEPCI_PCIBUS_ORDER - ide_scan_pcibus(ide_scan_direction); -#endif - -#ifdef CONFIG_ETRAX_IDE - { - extern void init_e100_ide(void); - init_e100_ide(); - } -#endif /* CONFIG_ETRAX_IDE */ -#ifdef CONFIG_BLK_DEV_CMD640 - { - extern void ide_probe_for_cmd640x(void); - ide_probe_for_cmd640x(); - } -#endif /* CONFIG_BLK_DEV_CMD640 */ -#ifdef CONFIG_BLK_DEV_IDE_PMAC - { - extern int pmac_ide_probe(void); - (void)pmac_ide_probe(); - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#ifdef CONFIG_BLK_DEV_GAYLE - { - extern void gayle_init(void); - gayle_init(); - } -#endif /* CONFIG_BLK_DEV_GAYLE */ -#ifdef CONFIG_BLK_DEV_FALCON_IDE - { - extern void falconide_init(void); - falconide_init(); - } -#endif /* CONFIG_BLK_DEV_FALCON_IDE */ -#ifdef CONFIG_BLK_DEV_MAC_IDE - { - extern void macide_init(void); - macide_init(); - } -#endif /* CONFIG_BLK_DEV_MAC_IDE */ -#ifdef CONFIG_BLK_DEV_Q40IDE - { - extern void q40ide_init(void); - q40ide_init(); - } -#endif /* CONFIG_BLK_DEV_Q40IDE */ -#ifdef CONFIG_BLK_DEV_BUDDHA - { - extern void buddha_init(void); - buddha_init(); - } -#endif /* CONFIG_BLK_DEV_BUDDHA */ -#ifdef CONFIG_BLK_DEV_IDEPNP - pnpide_init(); -#endif -#ifdef CONFIG_H8300 - h8300_ide_init(); -#endif -#ifdef BLK_DEV_MPC8xx_IDE - mpc8xx_ide_probe(); -#endif -} - -/* - * Probe module - */ - EXPORT_SYMBOL(ide_lock); static int ide_bus_match(struct device *dev, struct device_driver *drv) @@ -1745,33 +1649,6 @@ static int __init ide_init(void) proc_ide_create(); -#ifdef CONFIG_IDE_ARM - ide_arm_init(); -#endif -#ifdef CONFIG_BLK_DEV_ALI14XX - if (probe_ali14xx) - (void)ali14xx_init(); -#endif -#ifdef CONFIG_BLK_DEV_UMC8672 - if (probe_umc8672) - (void)umc8672_init(); -#endif -#ifdef CONFIG_BLK_DEV_DTC2278 - if (probe_dtc2278) - (void)dtc2278_init(); -#endif -#ifdef CONFIG_BLK_DEV_HT6560B - if (probe_ht6560b) - (void)ht6560b_init(); -#endif -#ifdef CONFIG_BLK_DEV_QD65XX - if (probe_qd65xx) - (void)qd65xx_init(); -#endif - - /* Probe for special PCI and other "known" interface chipsets. */ - probe_for_hwifs(); - return 0; } @@ -1807,10 +1684,6 @@ void __exit cleanup_module (void) for (index = 0; index < MAX_HWIFS; ++index) ide_unregister(index); -#ifdef CONFIG_BLK_DEV_IDEPNP - pnpide_exit(); -#endif - proc_ide_destroy(); bus_unregister(&ide_bus_type); Index: b/drivers/ide/legacy/Makefile =================================================================== --- a/drivers/ide/legacy/Makefile +++ b/drivers/ide/legacy/Makefile @@ -1,15 +1,24 @@ +# link order is important here + obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o +obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o -obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o -obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o +obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o +obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o +obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o +obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o +obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o -obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o +ifeq ($(CONFIG_BLK_DEV_IDECS), m) + obj-m += ide-cs.o +endif -# Last of all -obj-$(CONFIG_BLK_DEV_HD) += hd.o +ifeq ($(CONFIG_BLK_DEV_PLATFORM), m) + obj-m += ide_platform.o +endif EXTRA_CFLAGS := -Idrivers/ide Index: b/drivers/ide/legacy/ali14xx.c =================================================================== --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -230,8 +230,7 @@ int probe_ali14xx = 0; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); -/* Can be called directly from ide.c. */ -int __init ali14xx_init(void) +static int __init ali14xx_init(void) { if (probe_ali14xx == 0) goto out; @@ -247,9 +246,7 @@ out: return -ENODEV; } -#ifdef MODULE module_init(ali14xx_init); -#endif MODULE_AUTHOR("see local file"); MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets"); Index: b/drivers/ide/legacy/buddha.c =================================================================== --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -143,7 +143,7 @@ static int xsurf_ack_intr(ide_hwif_t *hw * Probe for a Buddha or Catweasel IDE interface */ -void __init buddha_init(void) +static int __init buddha_init(void) { hw_regs_t hw; ide_hwif_t *hwif; @@ -243,4 +243,8 @@ fail_base2: ide_device_add(idx); } + + return 0; } + +module_init(buddha_init); Index: b/drivers/ide/legacy/dtc2278.c =================================================================== --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -150,8 +150,7 @@ int probe_dtc2278 = 0; module_param_named(probe, probe_dtc2278, bool, 0); MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets"); -/* Can be called directly from ide.c. */ -int __init dtc2278_init(void) +static int __init dtc2278_init(void) { if (probe_dtc2278 == 0) return -ENODEV; @@ -163,9 +162,7 @@ int __init dtc2278_init(void) return 0; } -#ifdef MODULE module_init(dtc2278_init); -#endif MODULE_AUTHOR("See Local File"); MODULE_DESCRIPTION("support of DTC-2278 VLB IDE chipsets"); Index: b/drivers/ide/legacy/falconide.c =================================================================== --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -62,7 +62,7 @@ EXPORT_SYMBOL(falconide_intr_lock); * Probe for a Falcon IDE interface */ -void __init falconide_init(void) +static int __init falconide_init(void) { if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) { hw_regs_t hw; @@ -84,4 +84,9 @@ void __init falconide_init(void) ide_device_add(idx); } + } + + return 0; } + +module_init(falconide_init); Index: b/drivers/ide/legacy/gayle.c =================================================================== --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -110,13 +110,13 @@ static int gayle_ack_intr_a1200(ide_hwif * Probe for a Gayle IDE interface (and optionally for an IDE doubler) */ -void __init gayle_init(void) +static int __init gayle_init(void) { int a4000, i; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (!MACH_IS_AMIGA) - return; + return -ENODEV; if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE)) goto found; @@ -126,7 +126,7 @@ void __init gayle_init(void) NULL)) goto found; #endif - return; + return -ENODEV; found: for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) { @@ -191,4 +191,8 @@ found: } ide_device_add(idx); + + return 0; } + +module_init(gayle_init); Index: b/drivers/ide/legacy/ht6560b.c =================================================================== --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -307,8 +307,7 @@ int probe_ht6560b = 0; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); -/* Can be called directly from ide.c. */ -int __init ht6560b_init(void) +static int __init ht6560b_init(void) { ide_hwif_t *hwif, *mate; static u8 idx[4] = { 0, 1, 0xff, 0xff }; @@ -369,9 +368,7 @@ release_region: return -ENODEV; } -#ifdef MODULE module_init(ht6560b_init); -#endif MODULE_AUTHOR("See Local File"); MODULE_DESCRIPTION("HT-6560B EIDE-controller support"); Index: b/drivers/ide/legacy/macide.c =================================================================== --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -81,7 +81,7 @@ int macide_ack_intr(ide_hwif_t* hwif) * Probe for a Macintosh IDE interface */ -void __init macide_init(void) +static int __init macide_init(void) { hw_regs_t hw; ide_hwif_t *hwif; @@ -106,7 +106,7 @@ void __init macide_init(void) IRQ_BABOON_1); break; default: - return; + return -ENODEV; } hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); @@ -139,4 +139,8 @@ void __init macide_init(void) ide_device_add(idx); } + + return 0; } + +module_init(macide_init); Index: b/drivers/ide/legacy/q40ide.c =================================================================== --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -111,7 +111,7 @@ static const char *q40_ide_names[Q40IDE_ * Probe for Q40 IDE interfaces */ -void __init q40ide_init(void) +static int __init q40ide_init(void) { int i; ide_hwif_t *hwif; @@ -119,7 +119,7 @@ void __init q40ide_init(void) u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (!MACH_IS_Q40) - return ; + return -ENODEV; for (i = 0; i < Q40IDE_NUM_HWIFS; i++) { hw_regs_t hw; @@ -153,5 +153,8 @@ void __init q40ide_init(void) } ide_device_add(idx); + + return 0; } +module_init(q40ide_init); Index: b/drivers/ide/legacy/qd65xx.c =================================================================== --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -478,8 +478,7 @@ int probe_qd65xx = 0; module_param_named(probe, probe_qd65xx, bool, 0); MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); -/* Can be called directly from ide.c. */ -int __init qd65xx_init(void) +static int __init qd65xx_init(void) { if (probe_qd65xx == 0) return -ENODEV; @@ -492,9 +491,7 @@ int __init qd65xx_init(void) return 0; } -#ifdef MODULE module_init(qd65xx_init); -#endif MODULE_AUTHOR("Samuel Thibault"); MODULE_DESCRIPTION("support of qd65xx vlb ide chipset"); Index: b/drivers/ide/legacy/umc8672.c =================================================================== --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -169,8 +169,7 @@ int probe_umc8672 = 0; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); -/* Can be called directly from ide.c. */ -int __init umc8672_init(void) +static int __init umc8672_init(void) { if (probe_umc8672 == 0) goto out; @@ -181,9 +180,7 @@ out: return -ENODEV;; } -#ifdef MODULE module_init(umc8672_init); -#endif MODULE_AUTHOR("Wolfram Podien"); MODULE_DESCRIPTION("Support for UMC 8672 IDE chipset"); Index: b/drivers/ide/pci/Makefile =================================================================== --- a/drivers/ide/pci/Makefile +++ b/drivers/ide/pci/Makefile @@ -36,4 +36,8 @@ obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via8 # Must appear at the end of the block obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o +ifeq ($(CONFIG_BLK_DEV_CMD640), m) + obj-m += cmd640.o +endif + EXTRA_CFLAGS := -Idrivers/ide Index: b/drivers/ide/pci/cmd640.c =================================================================== --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -706,9 +706,9 @@ static int pci_conf2(void) } /* - * Probe for a cmd640 chipset, and initialize it if found. Called from ide.c + * Probe for a cmd640 chipset, and initialize it if found. */ -int __init ide_probe_for_cmd640x (void) +static int __init cmd640x_init(void) { #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED int second_port_toggled = 0; @@ -883,3 +883,7 @@ int __init ide_probe_for_cmd640x (void) return 1; } +module_param_named(probe_vlb, cmd640_vlb, bool, 0); +MODULE_PARM_DESC(probe, "probe for VLB version of CMD640 chipset"); + +module_init(cmd640x_init); Index: b/drivers/ide/ppc/Makefile =================================================================== --- /dev/null +++ b/drivers/ide/ppc/Makefile @@ -0,0 +1,3 @@ + +obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o +obj-$(CONFIG_BLK_DEV_MPC8xx_IDE) += mpc8xx.o Index: b/drivers/ide/ppc/mpc8xx.c =================================================================== --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -839,7 +839,7 @@ void m8xx_ide_init(void) ppc_ide_md.ide_init_hwif = m8xx_ide_init_hwif_ports; } -void __init mpc8xx_ide_probe(void) +static int __init mpc8xx_ide_probe(void) { u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -851,4 +851,8 @@ void __init mpc8xx_ide_probe(void) #endif ide_device_add(idx); + + return 0; } + +module_init(mpc8xx_ide_probe); Index: b/drivers/ide/ppc/pmac.c =================================================================== --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1786,3 +1786,5 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif } #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + +module_init(pmac_ide_probe); Index: b/drivers/ide/setup-pci.c =================================================================== --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -766,21 +766,20 @@ static int __init ide_scan_pcidev(struct /** * ide_scan_pcibus - perform the initial IDE driver scan - * @scan_direction: set for reverse order scanning * * Perform the initial bus rather than driver ordered scan of the * PCI drivers. After this all IDE pci handling becomes standard * module ordering not traditionally ordered. */ - -void __init ide_scan_pcibus (int scan_direction) + +int __init ide_scan_pcibus(void) { struct pci_dev *dev = NULL; struct pci_driver *d; struct list_head *l, *n; pre_init = 0; - if (!scan_direction) + if (!ide_scan_direction) while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) ide_scan_pcidev(dev); else @@ -800,5 +799,7 @@ void __init ide_scan_pcibus (int scan_di printk(KERN_ERR "%s: failed to register driver for %s\n", __FUNCTION__, d->driver.mod_name); } + + return 0; } #endif Index: b/include/linux/ide.h =================================================================== --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1014,7 +1014,8 @@ extern void do_ide_request(struct reques void ide_init_disk(struct gendisk *, ide_drive_t *); #ifdef CONFIG_IDEPCI_PCIBUS_ORDER -extern void ide_scan_pcibus(int scan_direction) __init; +extern int ide_scan_direction; +int __init ide_scan_pcibus(void); extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name); #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME) #else - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html