On Tuesday 20 November 2007 19:29:56 Thomas Gleixner wrote:
> On Tue, 20 Nov 2007, Andi Kleen wrote:
>
> >
> > > This requires propably working 64bit DMA, which is not possible with
> > > the SB600 controller.
> >
> > It should not no. The remapping is done into the GART which is <4GB
> > and that is the address the SB600 sees.
>
> Hmm, I just checked the boot logs of the failing 4GB kernel:
>
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
> ...
> CPU 0: aperture @ c000000 size 32 MB
> Aperture too small (32 MB)
> No AGP bridge found
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Mapping aperture over 65536 KB of RAM @ c000000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The aperture is mapped at c000000 and c000000 + 64MB < 4GB
> Memory: 4055984k/4718592k available (2146k kernel code, 136780k reserved, 1273k data, 296k init)
>
> 4718592k * 1024 == 0x120000000
>
> So now we have addresses > 4G and I suspect that this is somehow
> related to the problem.
Yes of course -- without >4GB the PCI-GART would not be used at all
(unless you force it) and then no merging.
>
> Also is the aperture size of 32MB somehow related to this ?
This just means the BIOS didn't initialize it properly (a lot of
BIOS don't do anymore these days because they assume it's a AGP
only feature) -- that is why the kernel allocated its own over
memory.
I think we really have to find out which request freezes it.
Can you perhaps just apply this patch and post the output?
Index: linux-2.6.24-rc1-hack/arch/x86/kernel/pci-gart_64.c
===================================================================
--- linux-2.6.24-rc1-hack.orig/arch/x86/kernel/pci-gart_64.c
+++ linux-2.6.24-rc1-hack/arch/x86/kernel/pci-gart_64.c
@@ -385,13 +385,19 @@ static int gart_map_sg(struct device *de
unsigned long pages = 0;
int need = 0, nextneed;
struct scatterlist *s, *ps, *start_sg, *sgmap;
-
+
if (nents == 0)
return 0;
if (!dev)
dev = &fallback_dev;
+ if (*dev->dma_mask <= 0xffffffff) {
+ for_each_sg(sg, s, nents, i) {
+ printk("%d: map %lx len %u dir %d\n", i, sg_phys(s), s->length, dir);
+ }
+ }
+
out = 0;
start = 0;
start_sg = sgmap = sg;
Tejun can probably figure out from that output where it comes
from in libata :)
-Andi
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
