Re: [IDE] Fix build bug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thursday 25 October 2007, Ralf Baechle wrote:
>   CC      drivers/ide/pci/generic.o
> drivers/ide/pci/generic.c:52: error: __setup_str_ide_generic_all_on causes a
> +section type conflict
> 
> This sort of build error is becoming a regular issue.  Either all or non
> of the elements that go into a particular section of a compilation unit
> need to be const.  Or an error may result such as in this case if
> CONFIG_HOTPLUG is unset.
> 
> Maybe worth a check in checkpatch.pl - but certainly gcc's interolerance
> is also being less than helpful here.
> 
> ---
>  drivers/ide/pci/generic.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
> index f44d708..0047684 100644
> --- a/drivers/ide/pci/generic.c
> +++ b/drivers/ide/pci/generic.c
> @@ -67,7 +67,7 @@ MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE st
>  		.udma_mask	= ATA_UDMA6, \
>  	}
>  
> -static const struct ide_port_info generic_chipsets[] __devinitdata = {
> +static struct ide_port_info generic_chipsets[] __devinitdata = {
>  	/*  0 */ DECLARE_GENERIC_PCI_DEV("Unknown",	0),
>  
>  	{	/* 1 */

I would prefer to not remove const from generic_chipsets[] so:

[PATCH] drivers/ide/pci/generic: fix build for CONFIG_HOTPLUG=n

It turns out that const and __{dev}initdata cannot be mixed currently
and that generic IDE PCI host driver is also affected by the same issue:

On Thursday 25 October 2007, Ralf Baechle wrote:
>   CC      drivers/ide/pci/generic.o
> drivers/ide/pci/generic.c:52: error: __setup_str_ide_generic_all_on causes a
> +section type conflict

[ Also reported by Martijn Uffing <mp3project@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>. ]

This patch workarounds the problem in a bit hackish way but without
removing const from generic_chipsets[] (it adds const to __setup() so
__setup_str_ide_generic_all becomes const).

Now all __{dev}initdata data in generic IDE PCI host driver are read-only
so it builds again (driver's .init.data section gets marked as READONLY).

Cc: Martijn Uffing <mp3project@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/ide/pci/generic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: b/drivers/ide/pci/generic.c
===================================================================
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -49,7 +49,7 @@ static int __init ide_generic_all_on(cha
 	printk(KERN_INFO "IDE generic will claim all unknown PCI IDE storage controllers.\n");
 	return 1;
 }
-__setup("all-generic-ide", ide_generic_all_on);
+const __setup("all-generic-ide", ide_generic_all_on);
 #endif
 module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
 MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux