Re: PMP device port link speed issues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Kalra Ashish-B00888 wrote:
> Hello Tejun,
> 
> This patch will surely fix my problem, but won't it be better to set
> each PMP device port link speed directly to
> the host<->PMP link speed, during SATA PMP device configuration in
> sata_pmp_attach(), instead of calling 
> sata_link_init_spd() for each link. 
> 
> The PMP chip should be responsible for matching link speed difference,
> but probably there could be issues with
> certain PMP chips, as it looks like in our case, where NCQ hangs are
> probably caused due to link speed difference.
> It should be simpler to handle it in S/W, by limiting PMP device port
> link speeds to host<->PMP link speed.

Yeah, I agree.  There's nearly nothing to be gained by driving
downstream PHYs faster than the upstream PHY.  I'll submit a patch to
limit downstream port speed by upstream speed.

Thanks.

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux