>-----Original Message----- >From: Alan Cox [mailto:alan@xxxxxxxxxxxxxxxxxxx] >Sent: Monday, October 29, 2007 3:14 PM >To: Gaston, Jason D >Cc: linux-ide@xxxxxxxxxxxxxxx >Subject: Re: ATAPI devices in AHCI mode not working > >> ata1: SATA max UDMA/133 abar m1024@0xd9101000 port 0xd9101100 irq 216 >> ata2: SATA max UDMA/133 abar m1024@0xd9101000 port 0xd9101180 irq 216 >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> ata1.00: ATAPI: ATAPI DVD D DH16D2S, EP52, max UDMA/100 >> ata1.00: configured for UDMA/100 > >Much better - no misdetected link type, no device claiming to be PATA >when its SATA. > > >Right that eliminates all the obvious goings on being caused by broken >devices which is a start. Doesn't shed any light on the rest of it. What >happens if you boot with irqpoll enabled ? (wondering if the timeouts are >ACPI or IRQ routing stuff) I rebuilt the kernel; the DVD and USB devices are functional now. I'm not sure what the problem was before. On a side note: In 2.6.24.rc1 the DVD starts working right away, but on a SLES10_SP1 kernel, it takes some time for it to step down to a PIO mode before the DVD can be mounted. Oh well. Thanks! Jason - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html