[PATCH #upstream 2/2] libata: no need to speed down if already at PIO0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After reset, transfer mode is always PIO0 regardless of
dev->xfer_mask.  Check dev->pio_mode before trying to slow down after
configuration failure.  This prevents bogus speed down before device
is actually configured.

Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
Cc: Alan Cox <lan@xxxxxxxxxxxxxxxxxxx>
---
 drivers/ata/libata-eh.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: work/drivers/ata/libata-eh.c
===================================================================
--- work.orig/drivers/ata/libata-eh.c
+++ work/drivers/ata/libata-eh.c
@@ -2437,7 +2437,7 @@ static int ata_eh_handle_dev_fail(struct
 		/* give it just one more chance */
 		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
 	case -EIO:
-		if (ehc->tries[dev->devno] == 1) {
+		if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
 			/* This is the last chance, better to slow
 			 * down than lose it.
 			 */
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux