Linux USB Users

• Thread Index

• Re: Strange behavior with ZTE MF821D (and possible other MDM9200 devices)
  • From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
• Re: usb disk recognized but fails
  • From: Milan Svoboda <milan.svoboda@xxxxxxxxxx>
• Re: [PATCH 1/2] ohci-platform: Add support for controllers with big-endian regs / descriptors
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 2/2] ehci-platform: Add support for controllers with big-endian regs / descriptors
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] usb: host: xhci: fix HALTED endpoint handling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] staging/usbip: remove vhci_hcd vhci_hub_status change message
  • From: Shuah Khan <shuah.kh@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: USB EHCI broken on Celeron N2920 (Bay Trail)
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xhci ASMedia lockups - a theory and a patch
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• 30 sec boot delay and logitech mouse disconnection
  • From: glphvgacs <darwinskernel@xxxxxxxxx>
• Re: [PATCH v2] xhci: Don't trace all short/incomplete receives
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: fix HALTED endpoint handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] ohci-platform: Add support for controllers with big-endian regs / descriptors
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: fix HALTED endpoint handling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: fix HALTED endpoint handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v7 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: fix HALTED endpoint handling
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/10] USB Host support for OMAP5 uEVM (for 3.14)
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 5/5] xhci: Simpify processing LINK TRBs when writing trb
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH 4/5] xhci: Don't pass TRB_CYCLE value to queue_trb()
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH 3/5] xhci: Pass the 'ep_ring' to prepare_transfer()
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH 2/5] xhci: isoc transfers can't fail when partially queued - remove cleanup code.
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH 1/5] xhci: Don't change the ownership of LINK TRB until all the TRB are written
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH 0/5] xhci: fixes/changes to trb writing code
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH 1/2] ohci-platform: Add support for controllers with big-endian regs / descriptors
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v7 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ohci-platform: Add support for controllers with big-endian regs / descriptors
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] ehci-platform: Add support for controllers with big-endian regs / descriptors
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/2] ohci-platform: Add support for controllers with big-endian regs / descriptors
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: usb audio breaks ohci-pci
  • From: Dennis New <dennisn@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] dual scan thread bug fix
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] fix our current target reap infrastructure
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] target refcounting infrastructure fixes for usb
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: USB serial gadget: Interchanged order of TX packets
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 01/12] libusbg: Surround header with include guards.
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 00/12] libusbg: Cleanup, bug fix and refactoring.
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH v4 0/2] libusbg: clean up and error handling
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH v4 1/4] libusbg: Path length replaced with MAX_LENGTH & MAX_PATH_LENGTH
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH v4 0/2] libusbg: clean up and error handling
  • From: Matt Porter <mporter@xxxxxxxxxx>
• libusbg 0.1.0 (formerly libgadget)
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: USB EHCI broken on Celeron N2920 (Bay Trail)
  • From: Chris Cheng <chris.cheng@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2] xhci: Don't trace all short/incomplete receives
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: udc: delete wrong warning message for ep0in
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/2] usb: dwc3: core: continue probing if usb phy library returns -ENODEV/-ENXIO
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• RE: xhci ASMedia lockups - a theory and a patch
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: FunctionFS: Provide device and configdescriptor from user mode application?
  • From: Krzysztof Opasiak <k.opasiak@xxxxxxxxxxx>
• USB serial gadget: Interchanged order of TX packets
  • From: Philip Philippe <phileobe@xxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• USB EHCI broken on Celeron N2920 (Bay Trail)
  • From: Chris Cheng <chris.cheng@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• Re: [PATCH v3] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [patch] usb: phy: msm: tiny leak on error in probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: udc: delete wrong warning message for ep0in
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: chipidea udc: ctrl traffic on endpoint 8
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: USB-PATA bridge inic-1511. It is not possible to read a lot of audio disks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Stlinux-devel] FW: [PATCH (linux-stm) 1/2] usb: dwc3: fix kernel compilation in gadget mode
  • From: Carmelo Amoroso <carmelo.amoroso@xxxxxx>
• Re: AM335x USB DMA seems broken on ISOC URBs
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: XHCI - USB3 HDD not recognised
  • From: Chris Clayton <chris2553@xxxxxxxxxxxxxx>
• [GIT PULL] USB patches for 3.14-rc1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: host: xhci: fix HALTED endpoint handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: EHCI host broken -- interrupts disabled
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Bug#733826: [PATCH] xhci: Set scatter-gather limit to avoid failed block writes.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Stop last TRB being a LINK TRB
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xhci ASMedia lockups - a theory and a patch
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb disk recognized but fails
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: EHCI host broken -- interrupts disabled
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [BUGREPORT] Linux USB 3.0
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb disk recognized but fails
  • From: Milan Svoboda <milan.svoboda@xxxxxxxxxx>
• Re: usb disk recognized but fails
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] usb: gadget: f_fs: add poll for endpoint 0
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: Fwd: Re: [alsa-devel] no reset_resume for driver snd-usb-audio for logitech headset H600
  • From: Takashi Iwai <tiwai@xxxxxxx>
• FunctionFS: Provide device and configdescriptor from user mode application?
  • From: Marco Zamponi <mzamponi@xxxxxxxxx>
• FunctionFS: Provide device and configdescriptor from user mode application?
  • From: Marco Zamponi <mzamponi@xxxxxxxxx>
• [PATCH v6 02/10] mfd: omap-usb-host: Get clocks based on hardware revision
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 03/10] mfd: omap-usb-host: Use clock names as per function for reference clocks
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 01/10] mfd: omap-usb-host: Use resource managed clk_get()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 06/10] ARM: dts: omap4: Update omap-usb-host node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 05/10] mfd: omap-usb-tll: Update DT clock binding information
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 08/10] ARM: dts: omap4-panda: Provide USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 07/10] ARM: dts: omap5: Update omap-usb-host node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 09/10] ARM: dts: omap5-uevm: Provide USB PHY clock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 04/10] mfd: omap-usb-host: Update DT clock binding information
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 10/10] ARM: OMAP2+: Remove legacy_init_ehci_clk()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v6 00/10] USB Host support for OMAP5 uEVM (for 3.14)
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] xhci: Pass the physical address to queue_trb() as a single u64
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [no subject]
  • From: Marco Zamponi <mzamponi@xxxxxxxxx>
• Re: usb audio breaks ohci-pci
  • From: Dennis New <dennisn@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [PATCH v3] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 4/6] phy-rcar-usb-gen2: add device tree support
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• RE: EHCI host broken -- interrupts disabled
  • From: "Chen, Jamie" <jamie.chen@xxxxxxxxx>
• Re: AM335x USB DMA seems broken on ISOC URBs
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: AM335x USB DMA seems broken on ISOC URBs
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: gadgetfs USB2.0 Chapter 9 Tests: Test after "Addressed State" fails
  • From: Marco Zamponi <mzamponi@xxxxxxxxx>
• RE: [PATCH] xhci: make warnings greppable
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: chipidea udc: ctrl traffic on endpoint 8
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH v5 3/9] mfd: omap-usb-host: Update DT clock binding information
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 2/9] mfd: omap-usb-host: Get clocks based on hardware revision
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Fwd: Re: [alsa-devel] no reset_resume for driver snd-usb-audio for logitech headset H600
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH v2] usb: gadget: fix NULL pointer dereference
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• RE: [PATCH v9 00/12] Add power management support for mxs phy
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/9] usb: chipidea: host: vbus control change for OTG HNP.
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 03/10] usb: chipidea: host:vbus control change for OTG HNP.
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 02/10] usb: chipidea: usb OTG fsm initlization.
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• [PATCH v2 6/6] usb: chipidea: OTG fsm driver HNP polling implementation.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 3/6] usb: chipidea: udc: add OTG status request handling.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 4/6] usb: chipidea: set host request flag via sys input.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 5/6] usb: otg-fsm: add a timer for polling host request flag from peripheral.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 1/6] usb: otg-fsm: add HNP polling operation function.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 0/6] usb: chipidea: add OTG HNP polling support.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 2/6] usb: otg-fsm: add host request flag for HNP polling.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 9/9] usb: chipidea: debug: add debug file for OTG variables show and registers dump.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 7/9] usb: chipidea: OTG HNP and SRP fsm implementation.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 3/9] usb: chipidea: host: vbus control change for OTG HNP.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 8/9] usb: chipidea: add sys inputs for OTG fsm input.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 6/9] usb: chipidea: OTG fsm timers initialization.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 5/9] usb: chipidea: add OTG fsm operation functions implemenation.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 4/9] usb: chipidea: udc: driver update for OTG HNP.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 0/9] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 2/9] usb: chipidea: usb OTG fsm initlization.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v2 1/9] usb: phy-fsm: update OTG HNP state transition conditions according to OTG and EH 2.0 spec.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: need to mask when writting endptflush and endptprime
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 1/1] usb: chipidea: udc: delete wrong warning message for ep0in
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: Fwd: Re: [alsa-devel] no reset_resume for driver snd-usb-audio for logitech headset H600
  • From: <baumber@xxxxxxxxxxx>
• Re: [PATCH v7 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Peter Palúch <Peter.Paluch@xxxxxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: walt <w41ter@xxxxxxxxx>
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: walt <w41ter@xxxxxxxxx>
• USB-PATA bridge inic-1511. It is not possible to read a lot of audio disks
  • From: Andrey Karpenko <andrey@xxxxxxxxx>
• Re: [PATCH v7 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 4/6] phy-rcar-usb-gen2: add device tree support
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: AM335x USB DMA seems broken on ISOC URBs
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Peter Palúch <Peter.Paluch@xxxxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Christian Franke <Christian.Franke@xxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: chipidea udc: ctrl traffic on endpoint 8
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH] usbcore: fix BABBLE failed enumeration of legacy USB2 devices on USB3 bus
  • From: Jérôme Carretero <cJ-ko@xxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: usb3 hdd docking station doesn't work with recent kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFT] usb: Don't enable USB 3.0 LPM for non-Intel hosts.
  • From: Sergey Galanov <sergey.e.galanov@xxxxxxxxx>
• [RFT] xhci: Fix resume issues on Renesas chips in Samsung laptops
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFT] usb: Don't enable USB 3.0 LPM for non-Intel hosts.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFT] usb: Don't enable USB 3.0 LPM for non-Intel hosts.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb3 hdd docking station doesn't work with recent kernels
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Peter Palúch <Peter.Paluch@xxxxxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: make warnings greppable
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: EHCI host broken -- interrupts disabled
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• [PATCH v2] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
  • From: Christopher Covington <cov@xxxxxxxxxxxxxx>
• [PATCH] usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
  • From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: AM335x USB DMA seems broken on ISOC URBs
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: chipidea udc: ctrl traffic on endpoint 8
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• [PATCH] xhci: Fix use of 'reserved' command ring entries
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: fix NULL pointer dereference
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• chipidea udc: ctrl traffic on endpoint 8
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: chipidea: need to mask when writting endptflush and endptprime
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: Bug#733826: [PATCH] xhci: Set scatter-gather limit to avoid failed block writes.
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [PATCH v2 2/3] usb: gadget: f_fs: add poll for endpoint 0
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• RE: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH] usb: chipidea: need to mask when writting endptflush and endptprime
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: Sascha Weaver <wzyboy@xxxxxxxxxx>
• [patch v2] usb: gadget: gr_udc: remove some unneeded error handling
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] xhci: Stop last TRB being a LINK TRB
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH] net: sk == 0xffffffff fix - not for commit
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: need to mask when writting endptflush and endptprime
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH] net: sk == 0xffffffff fix - not for commit
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] usb: gadget: f_fs: add poll for endpoint 0
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] usb: gadget: f_fs: add aio support
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH v2 2/3] usb: gadget: f_fs: add poll for endpoint 0
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH v2 1/3] usb: gadget: f_fs: fix setup request handling
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH] xhci: make warnings greppable
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH] xhci: make warnings greppable
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH v4 1/2] usb: musb: dsps, debugfs files
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] usb: musb: dsps, use devm_kzalloc
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] usb: musb dsps updates
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH v2 3/3] usb: gadget: f_fs: add aio support
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• [PATCH v2 2/3] usb: gadget: f_fs: add poll for endpoint 0
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• [PATCH v2 1/3] usb: gadget: f_fs: fix setup request handling
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• [PATCH v2 0/3] usb: gadget: f_fs: add asynchronous I/O support
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• Re: [PATCH v7 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
• [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• [PATCH 1/2] USB: at91: fix the number of endpoint parameter
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• Re: [Stlinux-devel] FW: [PATCH (linux-stm) 1/2] usb: dwc3: fix kernel compilation in gadget mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH] net: sk == 0xffffffff fix - not for commit
  • From: Andrew Ruder <andy@xxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: make warnings greppable
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Peter Palúch <Peter.Paluch@xxxxxxxxxxxx>
• Re: EHCI host broken -- interrupts disabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 06/10] usb: gate clearing FEAT_C_ENABLE to usb2 hubs
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: EHCI host broken -- interrupts disabled
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH 06/10] usb: chipidea: OTG fsm timers initialization.
  • From: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 06/10] usb: gate clearing FEAT_C_ENABLE to usb2 hubs
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [PATCH] net: sk == 0xffffffff fix - not for commit
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH] net: sk == 0xffffffff fix - not for commit
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH v3 00/10] Just the essential port power control fixes for 3.14
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Stlinux-devel] FW: [PATCH (linux-stm) 1/2] usb: dwc3: fix kernel compilation in gadget mode
  • From: Carmelo Amoroso <carmelo.amoroso@xxxxxx>
• RE: [PATCH 06/10] usb: chipidea: OTG fsm timers initialization.
  • From: "B47624@xxxxxxxxxxxxx" <B47624@xxxxxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH] ARM: sunxi: Add driver for sunxi usb phy
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• RE: xhci ASMedia lockups - a theory and a patch
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] usb: gadget: fix NULL pointer dereference
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• RE: [PATCH 03/10] usb: chipidea: host:vbus control change for OTG HNP.
  • From: "B47624@xxxxxxxxxxxxx" <B47624@xxxxxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH] ARM: sunxi: Add driver for sunxi usb phy
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 2/2] usb: gadget: f_fs: add aio support
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• Re: [PATCH] ARM: sunxi: Add driver for sunxi usb phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• RE: USB Gadget Patches
  • From: "suresh.gupta@xxxxxxxxxxxxx" <suresh.gupta@xxxxxxxxxxxxx>
• Re: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v7 2/2] ehci-platform: Add support for clks and phy passed through devicetree
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH] ARM: sunxi: Add driver for sunxi usb phy
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] Just the essential port power control fixes for 3.14
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: usb audio breaks ohci-pci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v7 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v7 2/2] ehci-platform: Add support for clks and phy passed through devicetree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v7 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
• Re: [PATCH v6 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH (linux-stm) 1/2] usb: dwc3: fix kernel compilation in gadget mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Suspend issues with a LaCie USB hard disk connected
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: Suspend issues with a LaCie USB hard disk connected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: gadget: f_fs: add aio support
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• RE: xhci ASMedia lockups - a theory and a patch
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Peter Palúch <Peter.Paluch@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: f_fs: add poll for endpoint 0
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH v6 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 2/2] ehci-platform: Add support for clks and phy passed through devicetree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• RE: xhci ASMedia lockups - a theory
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH] ARM: sunxi: Add driver for sunxi usb phy
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [Bug 68161] Unstable work of xhci with USB3.0 card reader and UDMA7 CompactFlash card.
  • From: tatxarata <tatxarata@xxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 00/10] xhci: re-work command queue management
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: xhci ASMedia lockups - a theory
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] ARM: sunxi: Add driver for sunxi usb phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• usb disk recognized but fails
  • From: Milan Svoboda <milan.svoboda@xxxxxxxxxx>
• xhci ASMedia lockups - a theory
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: USB Gadget Patches
  • From: Felipe Balbi <balbi@xxxxxx>
• usb audio breaks ohci-pci
  • From: Dennis New <dennisn@xxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: do not sleep in atomic context
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: Bug#704242: Driver for PL-2303 HX not working
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: Sascha Weaver <wzyboy@xxxxxxxxxx>
• Re: Suspend issues with a LaCie USB hard disk connected
  • From: Daniel Mack <zonque@xxxxxxxxx>
• RE: xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: Sascha Weaver <wzyboy@xxxxxxxxxx>
• RE: [PATCH 08/10] usb: chipidea: add OTG HNP polling support.
  • From: "B47624@xxxxxxxxxxxxx" <B47624@xxxxxxxxxxxxx>
• RE: [PATCH 02/10] usb: chipidea: usb OTG fsm initlization.
  • From: "B47624@xxxxxxxxxxxxx" <B47624@xxxxxxxxxxxxx>
• RE: [Bug 68161] Unstable work of xhci with USB3.0 card reader and UDMA7 CompactFlash card.
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: David Laight <David.Laight@xxxxxxxxxx>
• xhci-hcd (millions of) "Too many fragments" error on LUKS-encrypted device
  • From: Sascha Weaver <wzyboy@xxxxxxxxxx>
• Re: [PATCH net-next v2 0/3] r8152: remove limitation
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH net-next v2 1/3] r8152: change the descriptor
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH net-next v2 0/3] r8152: remove limitation
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH net-next v2 2/3] r8152: fix the warnings and a error from checkpatch.pl
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• [PATCH net-next v2 3/3] r8152: ecm and vendor modes coexist
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: need to mask when writting endptflush and endptprime
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v3 10/10] usb: documentation for usb port power off mechanisms
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• Re: [PATCH v3 00/10] Just the essential port power control fixes for 3.14
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v3 00/10] Just the essential port power control fixes for 3.14
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH] usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH v3 00/10] Just the essential port power control fixes for 3.14
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] ARM: sunxi: Add driver for sunxi usb phy
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC/PATCH 1/3] pm: make PM macros more smart
  • From: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx>
• RE: [RFC PATCH 0/2] dwc2/s3c-hsotg: Initial steps to combine the 2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] dwc2/s3c-hsotg: Initial steps to combine the 2 driver
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: walt <w41ter@xxxxxxxxx>
• Re: [RFC PATCH 0/2] dwc2/s3c-hsotg: Initial steps to combine the 2 driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC PATCH 0/2] dwc2/s3c-hsotg: Initial steps to combine the 2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] dwc2/s3c-hsotg: Initial steps to combine the 2 driver
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH] usb: ftdi_sio: add Mindstorms EV3 console adapter
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [Bug 68161] Unstable work of xhci with USB3.0 card reader and UDMA7 CompactFlash card.
  • From: tatxarata <tatxarata@xxxxxxxxx>
• Re: usb3 hdd docking station doesn't work with recent kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb3 hdd docking station doesn't work with recent kernels
  • From: Sergey Galanov <sergey.e.galanov@xxxxxxxxx>
• Re: [PATCH v5 2/2] ehci-platform: Add support for clks and phy passed through devicetree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb3 hdd docking station doesn't work with recent kernels
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: EHCI host broken -- interrupts disabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI host broken -- interrupts disabled
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• EHCI host broken -- interrupts disabled
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ftdi_sio: add Mindstorms EV3 console adapter
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] usb: ftdi_sio: add Mindstorms EV3 console adapter
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [PATCH] xhci: fix resume issues on Renesas chips
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: usb3 hdd docking station doesn't work with recent kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: chipidea: need to mask when writting endptflush and endptprime
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [RFC PATCH 0/2] dwc2/s3c-hsotg: Initial steps to combine the 2 driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] drivers/usb/dwc3: don't check resource with devm_ioremap_resource
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: problem to retrieve usb_serial object from usb_serial_port object
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH 2/2] usb: gadget: f_fs: add aio support
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• [PATCH 1/2] usb: gadget: f_fs: add poll for endpoint 0
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• [PATCH 0/2] usb: gadget: f_fs: add asynchronous I/O support
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• problem to retrieve usb_serial object from usb_serial_port object
  • From: "Silvio F." <silvio@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [RFC 00/10] xhci: re-work command queue management
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH 5/7] drivers/usb/dwc3: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 00/10] xhci: re-work command queue management
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH 2/2] usb: gadget: s3c-hsotg: move s3c-hsotg driver into dwc2
  • From: <dinguyen@xxxxxxxxxx>
• [RFC PATCH 1/2] staging: dwc2: Move DWC2 usb driver out of staging
  • From: <dinguyen@xxxxxxxxxx>
• [RFC PATCH 0/2] dwc2/s3c-hsotg: Initial steps to combine the 2 driver
  • From: <dinguyen@xxxxxxxxxx>
• RE: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v5 2/2] ehci-platform: Add support for clks and phy passed through devicetree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: usb3 hdd docking station doesn't work with recent kernels
  • From: Sergey Galanov <sergey.e.galanov@xxxxxxxxx>
• [PATCH] USB: gadget: s3c-hsotg: stall ep0 in set_halt function
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] ehci-platform: Add support for clks and phy passed through devicetree
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: XHCI issues: WD MyBook 1230 - reset SuperSpeed USB device
  • From: Peter Palúch <Peter.Paluch@xxxxxxxxxxxx>
• USB, TTY, char/misc, and Staging trees now closed for 3.14
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH usb-next] usb: core: let dynamic ids override static ids
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst [NEW HARDWARE]
  • From: walt <w41ter@xxxxxxxxx>
• Re: [PATCH] xhci: fix resume issues on Renesas chips
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] usb: dwc2: move device tree bindings doc to correct place
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Bug#704242: Driver for PL-2303 HX not working
  • From: Karsten Malcher <debian@xxxxxxxxxxx>
• Re: [PATCH v3 03/10] usb: find internal hub tier mismatch via acpi
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v5 2/2] ehci-platform: Add support for clks and phy passed through devicetree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4] Move DWC2 driver out of staging
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Ott <alan@xxxxxxxxxxx>
• RE: [PATCH v4] Move DWC2 driver out of staging
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v4] Move DWC2 driver out of staging
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4] Move DWC2 driver out of staging
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: EG20T USB Gadget Performance
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/10] usb: documentation for usb port power off mechanisms
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v3] Move DWC2 driver out of staging
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• EG20T USB Gadget Performance
  • From: Alan Ott <alan@xxxxxxxxxxx>
• Re: [PATCH net-next 3/3] r8152: add supporting the vendor mode only
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] Just the essential port power control fixes for 3.14
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v3 00/10] Just the essential port power control fixes for 3.14
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [RFC 00/10] xhci: re-work command queue management
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v2 4/4] usb: gadget: FunctionFS: use consistent naming with regard to ffs_lock
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH v2 3/4] usb: gadget: FunctionFS: staticize functions used only in f_fs.c
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH v2 1/4] usb: gadget: FunctionFS: dereference ffs_dev conditionally
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH v2 2/4] usb: gadget: code cleanup
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• [PATCH] xhci: fix resume issues on Renesas chips
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/4] usb: gadget: FunctionFS: dereference ffs_dev conditionally
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 0/4] Fixes for FuntionFS
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 4/4] usb: gadget: FunctionFS: use consistent naming with regard to ffs_lock
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 2/4] usb: gadget: code cleanup
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 3/4] usb: gadget: FunctionFS: staticize functions used only in f_fs.c
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 1/3] usb: gadget: FunctionFS: dereference ffs_dev conditionally
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [RFC 00/10] xhci: re-work command queue management
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 03/10] xhci: use command structures for xhci_queue_slot_control()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 02/10] xhci: use a command structure internally in xhci_address_device()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 05/10] xhci: use command structure for xhci_queue_new_dequeue_state()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 08/10] xhci: Add a global command queue
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 06/10] xhci: use command structures for xhci_queue_reset_ep()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 07/10] xhci: Use command structured when queuing commands
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 10/10] xhci: rework command timeout and cancellation,
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 09/10] xhci: Use completion and status in global command queue
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 04/10] xhci: use command structures for xhci_queue_stop_endpoint()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC 01/10] xhci: Use command structures when calling xhci_configure_endpoint
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• RE: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH 0/3] Fixes for FuntionFS
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 3/3] usb: gadget: FunctionFS: use consistent naming with regard to ffs_lock
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 2/3] usb: gadget: FunctionFS: staticize functions used only in f_fs.c
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 1/3] usb: gadget: FunctionFS: dereference ffs_dev conditionally
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: Bjørn Mork <bjorn@xxxxxxx>
• RE: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: Bjørn Mork <bjorn@xxxxxxx>
• RE: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH] usb: core: check for valid id_table when using the RefId feature
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: usb3 hdd docking station doesn't work with recent kernels
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Fwd: Re: [alsa-devel] no reset_resume for driver snd-usb-audio for logitech headset H600
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 1/2] usb: gadget: s3c2410_udc: Fix build error
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: s3c2410_udc: Fix build error
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 4/8] IBM Akebono: Add support to the OHCI platform driver for PPC476GTR
  • From: Alistair Popple <alistair@xxxxxxxxxxxx>
• Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
• [PATCH] usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [BUG] FL1009: xHCI host not responding to stop endpoint command.
  • From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: segate external USB3.0 HD cannot work
  • From: yoma sophian <sophian.yoma@xxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• usb3 hdd docking station doesn't work with recent kernels
  • From: Sergey Galanov <sergey.e.galanov@xxxxxxxxx>
• Re: [PATCH v4 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] usb: core: bail out if user gives an unknown RefId when using new_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: segate external USB3.0 HD cannot work
  • From: yoma sophian <sophian.yoma@xxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: segate external USB3.0 HD cannot work
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH net,stable] net: usbnet: fix SG initialisation
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [PATCH 05/10] usb: chipidea: add OTG fsm operation functions implemenation.
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• segate external USB3.0 HD cannot work
  • From: yoma sophian <sophian.yoma@xxxxxxxxx>
• Fwd: Re: [alsa-devel] no reset_resume for driver snd-usb-audio for logitech headset H600
  • From: <baumber@xxxxxxxxxxx>
• Re: [PATCH net,stable] net: usbnet: fix SG initialisation
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• 3.13-rc7 USB networking oops
  • From: Daniel J Blueman <daniel@xxxxxxxxx>
• RE: chipidea : ENDPTFLUSH and ENDPTPRIME register access
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: [PATCH 4/8] IBM Akebono: Add support to the OHCI platform driver for PPC476GTR
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [PATCH usb-next] usb: core: let dynamic ids override static ids
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 4/8] IBM Akebono: Add support to the OHCI platform driver for PPC476GTR
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 4/8] IBM Akebono: Add support to the OHCI platform driver for PPC476GTR
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: Thomas Kear <thomas@xxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/2] ohci and ehci-platform clks, phy and dt support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 2/2] ehci-platform: Add support for clks and phy passed through devicetree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH net,stable] net: usbnet: fix SG initialisation
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v3 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: usbnet / ax88179_178a: Panic in usb_hcd_map_urb_for_dma
  • From: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>
• [RFC 2/2] usb: core: allow a reference device for new_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 1/2] usb: core: add sanity checks when using bInterfaceClass with new_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• chipidea : ENDPTFLUSH and ENDPTPRIME register access
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• RE: [PATCH] usb: Skip U1/U2 LPM disable if device is disconnected.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] ohci-platform: Add support for devicetree instantiation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] usb: chipidea: add freescale imx28 special write register method
  • From: "'gregkh@xxxxxxxxxxxxxxxxxxx'" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] libusbg: Rename libgadget to libusbg.
  • From: Krzysztof Opasiak <k.opasiak@xxxxxxxxxxx>
• [PATCH] libusbg: Rename library to libusbg.
  • From: Krzysztof Opasiak <k.opasiak@xxxxxxxxxxx>
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/7] usb: chipidea: add freescale imx28 special write register method
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH 3.12 033/118] usb: xhci: Link TRB must not occur within a USB payload burst
  • From: walt <w41ter@xxxxxxxxx>
• Re: [PATCH 2/7] usb: chipidea: add freescale imx28 special write register method
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>