Non-working: 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64 GNU/Linux I'm sorry, I don't remember exactly which version worked, I have had the disk connected to TV for a long time and only recently I wanted to copy some movies on it. I guess it worked something like 6 or 9 months ago. Milan ______________________________________________________________ > Od: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> > Komu: Milan Svoboda <milan.svoboda@xxxxxxxxxx> > Datum: 20.01.2014 19:23 > Předmět: Re: usb disk recognized but fails > > CC: linux-usb@xxxxxxxxxxxxxxx, "USB Storage List" <usb-storage@xxxxxxxxxxxxxxxxxxxxxxxx>, linux-scsi@xxxxxxxxxxxxxxx >Cc-ing the USB storage list, in case this device needs some quirk. > >On Wed, Jan 15, 2014 at 03:47:39PM +0100, Milan Svoboda wrote: >> The SATA adapter has a power input, but it is not used, it is connected to the >> PC with Y-type USB cable. >> >> The disk works with my "smart" TV, it works with Windows on the same machine, >> it also had worked some time ago with Linux, but now it shows the following: > >Do you know which kernel version it worked with? What version are you >currently running? Please run `uname -a`. > >> [ 2192.027213] usb 1-3: new high-speed USB device number 5 using xhci_hcd >> [ 2192.042323] ums-cypress 1-3:1.0: USB Mass Storage device detected >> [ 2192.042500] scsi9 : usb-storage 1-3:1.0 >> [ 2193.044219] scsi 9:0:0:0: Direct-Access WDC WD64 00BPVT-00HXZT0 PQ: 0 ANSI: 0 >> [ 2193.045083] sd 9:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) >> [ 2193.045240] sd 9:0:0:0: [sdb] Write Protect is off >> [ 2193.045245] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00 >> [ 2193.045384] sd 9:0:0:0: [sdb] No Caching mode page found >> [ 2193.045388] sd 9:0:0:0: [sdb] Assuming drive cache: write through >> [ 2193.046259] sd 9:0:0:0: [sdb] No Caching mode page found >> [ 2193.046264] sd 9:0:0:0: [sdb] Assuming drive cache: write through >> [ 2193.054389] sdb: sdb1 >> [ 2193.055092] sd 9:0:0:0: [sdb] No Caching mode page found >> [ 2193.055095] sd 9:0:0:0: [sdb] Assuming drive cache: write through >> [ 2193.055098] sd 9:0:0:0: [sdb] Attached SCSI disk >> [ 2200.821345] usb 1-3: reset high-speed USB device number 5 using xhci_hcd >> [ 2200.835063] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e480 >> [ 2200.835068] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e4c0 >> [ 2267.897715] sd 9:0:0:0: [sdb] Unhandled sense code >> [ 2267.897719] sd 9:0:0:0: [sdb] >> [ 2267.897721] Result: hostbyte=0x07 driverbyte=0x08 >> [ 2267.897722] sd 9:0:0:0: [sdb] >> [ 2267.897724] Sense Key : 0x4 [current] >> [ 2267.897735] sd 9:0:0:0: [sdb] >> [ 2267.897736] ASC=0x0 ASCQ=0x0 >> [ 2267.897738] sd 9:0:0:0: [sdb] CDB: >> [ 2267.897740] cdb[0]=0x28: 28 00 4a 85 6e af 00 00 08 00 >> [ 2267.897746] end_request: I/O error, dev sdb, sector 1250258607 >> [ 2267.897750] Buffer I/O error on device sdb1, logical block 625129272 >> [ 2267.897752] Buffer I/O error on device sdb1, logical block 625129273 >> [ 2267.897753] Buffer I/O error on device sdb1, logical block 625129274 >> [ 2267.897754] Buffer I/O error on device sdb1, logical block 625129275 >> [ 2270.884154] usb 1-3: USB disconnect, device number 5 >> >> Bus 001 Device 010: ID 14cd:6116 Super Top M6116 SATA Bridge >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 2.00 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 64 >> idVendor 0x14cd Super Top >> idProduct 0x6116 M6116 SATA Bridge >> bcdDevice 1.50 >> iManufacturer 1 Super Top >> iProduct 3 USB 2.0 SATA BRIDGE >> iSerial 2 M6116018VE15 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 32 >> bNumInterfaces 1 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0xc0 >> Self Powered >> MaxPower 2mA >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 0 >> bAlternateSetting 0 >> bNumEndpoints 2 >> bInterfaceClass 8 Mass Storage >> bInterfaceSubClass 6 SCSI >> bInterfaceProtocol 80 Bulk-Only >> iInterface 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x81 EP 1 IN >> bmAttributes 2 >> Transfer Type Bulk >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0200 1x 512 bytes >> bInterval 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x02 EP 2 OUT >> bmAttributes 2 >> Transfer Type Bulk >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0200 1x 512 bytes >> bInterval 0 >> Device Qualifier (for other device speed): >> bLength 10 >> bDescriptorType 6 >> bcdUSB 2.00 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 64 >> bNumConfigurations 1 >> Device Status: 0x0001 >> Self Powered >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-usb" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
