Cc-ing the USB storage list, in case this device needs some quirk. On Wed, Jan 15, 2014 at 03:47:39PM +0100, Milan Svoboda wrote: > The SATA adapter has a power input, but it is not used, it is connected to the > PC with Y-type USB cable. > > The disk works with my "smart" TV, it works with Windows on the same machine, > it also had worked some time ago with Linux, but now it shows the following: Do you know which kernel version it worked with? What version are you currently running? Please run `uname -a`. > [ 2192.027213] usb 1-3: new high-speed USB device number 5 using xhci_hcd > [ 2192.042323] ums-cypress 1-3:1.0: USB Mass Storage device detected > [ 2192.042500] scsi9 : usb-storage 1-3:1.0 > [ 2193.044219] scsi 9:0:0:0: Direct-Access WDC WD64 00BPVT-00HXZT0 PQ: 0 ANSI: 0 > [ 2193.045083] sd 9:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) > [ 2193.045240] sd 9:0:0:0: [sdb] Write Protect is off > [ 2193.045245] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00 > [ 2193.045384] sd 9:0:0:0: [sdb] No Caching mode page found > [ 2193.045388] sd 9:0:0:0: [sdb] Assuming drive cache: write through > [ 2193.046259] sd 9:0:0:0: [sdb] No Caching mode page found > [ 2193.046264] sd 9:0:0:0: [sdb] Assuming drive cache: write through > [ 2193.054389] sdb: sdb1 > [ 2193.055092] sd 9:0:0:0: [sdb] No Caching mode page found > [ 2193.055095] sd 9:0:0:0: [sdb] Assuming drive cache: write through > [ 2193.055098] sd 9:0:0:0: [sdb] Attached SCSI disk > [ 2200.821345] usb 1-3: reset high-speed USB device number 5 using xhci_hcd > [ 2200.835063] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e480 > [ 2200.835068] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e4c0 > [ 2267.897715] sd 9:0:0:0: [sdb] Unhandled sense code > [ 2267.897719] sd 9:0:0:0: [sdb] > [ 2267.897721] Result: hostbyte=0x07 driverbyte=0x08 > [ 2267.897722] sd 9:0:0:0: [sdb] > [ 2267.897724] Sense Key : 0x4 [current] > [ 2267.897735] sd 9:0:0:0: [sdb] > [ 2267.897736] ASC=0x0 ASCQ=0x0 > [ 2267.897738] sd 9:0:0:0: [sdb] CDB: > [ 2267.897740] cdb[0]=0x28: 28 00 4a 85 6e af 00 00 08 00 > [ 2267.897746] end_request: I/O error, dev sdb, sector 1250258607 > [ 2267.897750] Buffer I/O error on device sdb1, logical block 625129272 > [ 2267.897752] Buffer I/O error on device sdb1, logical block 625129273 > [ 2267.897753] Buffer I/O error on device sdb1, logical block 625129274 > [ 2267.897754] Buffer I/O error on device sdb1, logical block 625129275 > [ 2270.884154] usb 1-3: USB disconnect, device number 5 > > Bus 001 Device 010: ID 14cd:6116 Super Top M6116 SATA Bridge > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x14cd Super Top > idProduct 0x6116 M6116 SATA Bridge > bcdDevice 1.50 > iManufacturer 1 Super Top > iProduct 3 USB 2.0 SATA BRIDGE > iSerial 2 M6116018VE15 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 32 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 2mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk-Only > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Device Qualifier (for other device speed): > bLength 10 > bDescriptorType 6 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > bNumConfigurations 1 > Device Status: 0x0001 > Self Powered > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
