Some co-workers of mine bought Samsung laptops that had mostly usb3 ports. Those ports did not resume correctly (the driver would timeout communicating and fail). This led to frustration as suspend/resume is a common use for laptops. Poking around, I applied the reset on resume quirk to this chipset and the resume started working. Reloading the xhci_hcd module had been the temporary workaround. Not sure if I should restrict this further or not. Probably should be sent to stable too. Signed-off-by: Don Zickus <dzickus@xxxxxxxxxx> --- drivers/usb/host/xhci-pci.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 73f5208..2a21892 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -144,6 +144,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; + if (pdev->vendor == PCI_VENDOR_ID_RENESAS) + xhci->quirks |= XHCI_RESET_ON_RESUME; } /* called during probe() after chip reset completes */ -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
