[RFC 02/10] xhci: use a command structure internally in xhci_address_device()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Preparing for the global command queue by using command strucure
in xhci_address_device

Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
 drivers/usb/host/xhci.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5e65052..0167a1c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3732,7 +3732,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_slot_ctx *slot_ctx;
 	struct xhci_input_control_ctx *ctrl_ctx;
 	u64 temp_64;
-	union xhci_trb *cmd_trb;
+	struct xhci_command *command;
 
 	if (!udev->slot_id) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
@@ -3753,11 +3753,19 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 		return -EINVAL;
 	}
 
+	command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	command->in_ctx = virt_dev->in_ctx;
+	command->completion = &xhci->addr_dev;
+
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
 	if (!ctrl_ctx) {
 		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
 				__func__);
+		kfree(command);
 		return -EINVAL;
 	}
 	/*
@@ -3779,20 +3787,22 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 				slot_ctx->dev_info >> 27);
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
+	command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
 	ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
 					udev->slot_id);
 	if (ret) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 				"FIXME: allocate a command ring segment");
+		kfree(command);
 		return ret;
 	}
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
-	timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+	timeleft = wait_for_completion_interruptible_timeout(
+			command->completion,
 			XHCI_CMD_DEFAULT_TIMEOUT);
 	/* FIXME: From section 4.3.4: "Software shall be responsible for timing
 	 * the SetAddress() "recovery interval" required by USB and aborting the
@@ -3802,7 +3812,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 		xhci_warn(xhci, "%s while waiting for address device command\n",
 				timeleft == 0 ? "Timeout" : "Signal");
 		/* cancel the address device command */
-		ret = xhci_cancel_cmd(xhci, NULL, cmd_trb);
+		ret = xhci_cancel_cmd(xhci, NULL, command->command_trb);
+		kfree(command);
 		if (ret < 0)
 			return ret;
 		return -ETIME;
@@ -3838,6 +3849,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 		break;
 	}
 	if (ret) {
+		kfree(command);
 		return ret;
 	}
 	temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
@@ -3872,7 +3884,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 		       "Internal device address = %d",
 		       le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
-
+	kfree(command);
 	return 0;
 }
 
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux