Linux CAN Development - Date Index

• Thread Index

• [PATCH 01/15] can: mcp251xfd: mcp251xfd_reg_invalid(): rename from mcp251xfd_osc_invalid()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 05/15] can: mcp251xfd: mcp251xfd_chip_stop(): convert to a void function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 08/15] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): prepare for PLL support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 06/15] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): factor out into separate function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 07/15] can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): improve chip detection and error handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 10/15] can: mcp251xfd: mcp251xfd_chip_timestamp_init(): factor out into separate function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 04/15] can: mcp251xfd: mcp251xfd_chip_sleep(): introduce function to bring chip into sleep mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 15/15] can: mcp251xfd: add support for internal PLL
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 03/15] can: mcp251xfd: mcp251xfd_unregister(): simplify runtime PM handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 12/15] can: mcp251xfd: __mcp251xfd_chip_set_mode(): prepare for PLL support: improve error handling and diagnostics
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 13/15] can: mcp251xfd: mcp251xfd_chip_clock_init(): prepare for PLL support, wait for OSC ready
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 02/15] can: mcp251xfd: mcp251xfd_regmap_crc_read(): ignore CRC error only if solely OSC register is read
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 00/15] can: mcp251xfd: add PLL support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 14/15] can: mcp251xfd: mcp251xfd_register(): prepare to activate PLL after softreset
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 11/15] can: mcp251xfd: mcp251xfd_chip_wake(): renamed from mcp251xfd_chip_clock_enable()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 09/15] can: mcp251xfd: mcp251xfd_chip_softreset_check(): wait for OSC ready before accessing chip
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: MCP251xfd PLLEN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [bug report] can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: petter@xxxxxxxxxx
• Re: MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] can: peak_usb: add ethtool interface to user defined flashed device number
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH 6/6] can: peak_usb: add ethtool interface to user defined flashed device number
  • From: Stéphane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Re: MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: petter@xxxxxxxxxx
• Re: MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: petter@xxxxxxxxxx
• Re: [PATCH v2 2/5] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v2 2/5] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: petter@xxxxxxxxxx
• Re: [PATCH v2 2/5] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Ulrich Hecht <uli@xxxxxxxx>
• MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: petter@xxxxxxxxxx
• Re: MCP2518FD : Failed to detect MCP2518FD (osc=0x00000000)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH 6/6] can: peak_usb: add ethtool interface to user defined flashed device number
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] can: peak_usb: allow flashing of user defined value
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] can: peak_usb: add callback to read user value of CANFD devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 4.9] can: bcm: fix UAF of bcm op
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6/6] can: peak_usb: add ethtool interface to user defined flashed device number
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 5/6] can: peak_usb: replace unregister_netdev() with unregister_candev()
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 4/6] can: peak_usb: allow flashing of user defined value
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 3/6] can: peak_usb: correction of a wrong field name
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 2/6] can: peak_usb: add callback to read user value of CANFD devices
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 1/6] can: peak_usb: rename a callback to a more explicit name
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 0/6] can: peak_usb: add ethtool interface to flashed value
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] dt-bindings: net: can: fix dtbs warning
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [RFC PATCH v3] can: isotp: fix CAN frame reception race in isotp_rcv()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v6 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC][PATCH v2] can: isotp: fix CAN frame reception race in isotp_rcv()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC][PATCH v2] can: isotp: fix CAN frame reception race in isotp_rcv()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [RFC][PATCH v2] can: isotp: fix CAN frame reception race in isotp_rcv()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 4.9] can: bcm: fix UAF of bcm op
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH 4.4] can: bcm: fix UAF of bcm op
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: isotp: fix CAN frame reception race in isotp_rcv()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v6 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH 4.14] can: bcm: fix UAF of bcm op
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] arm64: dts: renesas: r8a779a0-falcon: enable CANFD 0 and 1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] arm64: dts: renesas: r8a779a0: Add CANFD device node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] spi: make remove callback a void function
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH net-next 4/4] dt-binding: can: rcar-can: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 7/9] can: drivers: don't print IO remapped address of base registers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH net-next 4/4] dt-binding: can: rcar-can: include common CAN controller bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH net-next 2/4] dt-binding: can: sun4i_can: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 4/4] dt-binding: can: rcar-can: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 3/4] dt-binding: can: m_can: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 1/4] dt-binding: can: mcp251xfd: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/4] dt-binding: can: add common CAN controller bindings to existing CAN driver bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 6/9] can: bittiming: mark function arguments and local variables as const
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 9/9] can: c_can: ethtool: use default drvinfo
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/9] dt-binding: can: m_can: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 8/9] can: kvaser_usb: kvaser_usb_send_cmd(): remove redundant variable actual_len
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 7/9] can: drivers: don't print IO remapped address of base registers
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/9] dt-binding: can: rcar-can: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/9] dt-binding, bittiming and other cleanups
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/9] can: bittiming: can_validate_bitrate(): simplify bit rate checking
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/9] dt-binding: can: sun4i_can: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/9] dt-binding: can: mcp251xfd: include common CAN controller bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 1/5] mailmap: update email address of Brian Silverman
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH net 2/5] dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/5] can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/5] mailmap: update email address of Brian Silverman
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 5/5] can: flexcan: mark RX via mailboxes as supported on MCF5441X
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 4/5] can: tcan4x5x: regmap: fix max register value
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/5] pull-request: can 2022-01-24
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/5] spi: make remove callback a void function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4.14] can: bcm: fix UAF of bcm op
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH 4.14] can: bcm: fix UAF of bcm op
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.14] can: bcm: fix UAF of bcm op
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
• Re: [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: mcf5441x: flexcan FIFO and mailbox mode (was: Re: [PATCH v5 5/5] can: flexcan: add mcf5441x support)
  • From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
• Re: mcf5441x: flexcan FIFO and mailbox mode (was: Re: [PATCH v5 5/5] can: flexcan: add mcf5441x support)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: flexcan: mark RX via mailboxes as supported on MCF5441X
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
• Re: [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
• Re: mcf5441x: flexcan FIFO and mailbox mode (was: Re: [PATCH v5 5/5] can: flexcan: add mcf5441x support)
  • From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix array schemas encoded as matrices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• [PATCH] drivers: net: remove a dangling pointer in peak_usb_create_dev
  • From: Dongliang Mu <dzm91@xxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: QEMU CAN-FD emulation
  • From: Pavel Pisa <pisa@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH] can: tcan4x5x: regmap: fix max register value
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: mcf5441x: flexcan FIFO and mailbox mode (was: Re: [PATCH v5 5/5] can: flexcan: add mcf5441x support)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: mcf5441x: flexcan FIFO and mailbox mode (was: Re: [PATCH v5 5/5] can: flexcan: add mcf5441x support)
  • From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix array schemas encoded as matrices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: Fix array schemas encoded as matrices
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: Improve phandle-array schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Sv: MCP251xFD runs interrupt handler twice per message.
  • From: Markus Mirevik <markus.mirevik@xxxxxxxxxxxxxx>
• Re: MCP251xFD runs interrupt handler twice per message.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH AUTOSEL 5.15 185/188] can: flexcan: rename RX modes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 184/188] can: flexcan: allow to change quirks at runtime
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 186/188] can: flexcan: add more quirks to describe RX path capabilities
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 213/217] can: flexcan: allow to change quirks at runtime
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 214/217] can: flexcan: rename RX modes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 215/217] can: flexcan: add more quirks to describe RX path capabilities
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.16 198/217] can: do not increase rx statistics when generating a CAN rx error message frame
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: MCP251xFD runs interrupt handler twice per message.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: MCP251xFD runs interrupt handler twice per message.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Sv: MCP251xFD runs interrupt handler twice per message.
  • From: Markus Mirevik <markus.mirevik@xxxxxxxxxxxxxx>
• Re: MCP251xFD runs interrupt handler twice per message.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Sv: MCP251xFD runs interrupt handler twice per message.
  • From: Markus Mirevik <markus.mirevik@xxxxxxxxxxxxxx>
• Re: Queries on CAN frame work
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net] can: isotp: isotp_rcv_cf(): fix so->rx race problem
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH v8] net: can: Introduce-MEN-16Z192-00-CAN-controller-driver
  • From: Abhijeet Badurkar <abhijeet.badurkar@xxxxxxxxxx>
• Re: MCP251xFD runs interrupt handler twice per message.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Queries on CAN frame work
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: can-isotp: TX stmin violations
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: can: m_can: m_can_read_fifo, can_fd_dlc2len returns sometimes cf->len=0
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: can-isotp: TX stmin violations
  • From: Maik Allgöwer <maik@xxxxxxxxxxx>
• Sv: MCP251xFD runs interrupt handler twice per message.
  • From: Markus Mirevik <markus.mirevik@xxxxxxxxxxxxxx>
• Re: MCP251xFD runs interrupt handler twice per message.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Filter on controller level
  • From: "Dr. Michael Lauer" <mickey@xxxxxxxxxx>
• MCP251xFD runs interrupt handler twice per message.
  • From: Markus Mirevik <markus.mirevik@xxxxxxxxxxxxxx>
• Re: Queries on CAN frame work
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: Queries on CAN frame work
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Queries on CAN frame work
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Ulrich Hecht <uli@xxxxxxxx>
• Re: [PATCH net] can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH iproute2-next v4] iplink_can: add ctrlmode_{supported,_static} to the "--details --json" output
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v2 1/5] clk: renesas: r8a779a0: add CANFD module clock
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net 4/5] can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH v2 1/5] clk: renesas: r8a779a0: add CANFD module clock
  • From: Ulrich Hecht <uli@xxxxxxxx>
• Re: [PATCH v2 1/5] clk: renesas: r8a779a0: add CANFD module clock
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] drivers/net/can/softing: remove redundant ret variable
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH v2 0/3] add support for Allwinner R40 CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] can: sun4i_can: add support for R40 CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support
  • From: Ulrich Hecht <uli+renesas@xxxxxxxx>
• [PATCH v2 2/5] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Ulrich Hecht <uli+renesas@xxxxxxxx>
• [PATCH v2 1/5] clk: renesas: r8a779a0: add CANFD module clock
  • From: Ulrich Hecht <uli+renesas@xxxxxxxx>
• [PATCH v2 3/5] arm64: dts: renesas: r8a779a0: Add CANFD device node
  • From: Ulrich Hecht <uli+renesas@xxxxxxxx>
• [PATCH v2 4/5] arm64: dts: renesas: r8a779a0-falcon: enable CANFD 0 and 1
  • From: Ulrich Hecht <uli+renesas@xxxxxxxx>
• [PATCH v2 0/5] can: rcar_canfd: Add support for V3U flavor
  • From: Ulrich Hecht <uli+renesas@xxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: r8a779a0: Add CANFD device node
  • From: Ulrich Hecht <uli@xxxxxxxx>
• Re: [PATCH v2 2/3] can: sun4i_can: add support for R40 CAN controller
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 1/3] can: rcar_canfd: Add support for r8a779a0 SoC
  • From: Ulrich Hecht <uli@xxxxxxxx>
• [PATCH v2 3/3] ARM: dts: sun8i: r40: add node for CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] can: sun4i_can: add support for R40 CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: net: can: add support for Allwinner R40 CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] add support for Allwinner R40 CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• Re: [PATCH net] can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH net] can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net] can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• [PATCH 3/3] can: mcp251xfd: wake-on-can
  • From: Phil Greenland <phil@xxxxxxxxxxxxxxx>
• [PATCH 2/3] can: mcp251xfd: suspend and resume handlers
  • From: Phil Greenland <phil@xxxxxxxxxxxxxxx>
• [PATCH 1/3] can: mcp251xfd: automatic transceiver standby control
  • From: Phil Greenland <phil@xxxxxxxxxxxxxxx>
• [PATCH 0/3] can: mcp251xfd: Transceiver suspend, power management and wake-on-can
  • From: Phil Greenland <phil@xxxxxxxxxxxxxxx>
• [PATCH 2/2] platform: make platform_get_irq_byname_optional() optional
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH] can: softing: softing_startstop(): fix set but not used variable warning
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net] can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH net] can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH] can: softing: softing_startstop(): fix set but not used variable warning
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: softing: softing_startstop(): fix set but not used variable warning
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] mailmap: update email address of Brian Silverman
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: gs_usb: Zero-initialize flags
  • From: Brian Silverman <bsilver16384@xxxxxxxxx>
• Re: [PATCH] softingcs: Fix memleak on registration failure in softingcs_probe
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net 1/5] can: softing_cs: softingcs_probe(): fix memleak on registration failure
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] can: softing: softing_startstop(): fix set but not used variable warning
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: janz-ican3: initialize dlc variable
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net-next 01/22] can: janz-ican3: initialize dlc variable
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH iproute2-next v4] iplink_can: add ctrlmode_{supported,_static} to the "--details --json" output
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH net 5/5] can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/5] can: softing_cs: softingcs_probe(): fix memleak on registration failure
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/5] can: softing: softing_startstop(): fix set but not used variable warning
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 4/5] can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/5] can: xilinx_can: xcan_probe(): check for error irq
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/5] pull-request: can 2022-01-09
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] can: flexcan: add ethtool support to get rx/tx ring parameters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] can: flexcan: add ethtool support to get rx/tx ring parameters
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: gs_usb: Zero-initialize flags
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: softing: softing_startstop(): fix set but not used variable warning
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: gs_usb: Zero-initialize flags
  • From: Brian Silverman <bsilver16384@xxxxxxxxx>
• Re: [RFC PATCH] can: m_can: Add driver for M_CAN hardware in NVIDIA devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: gs_usb: Zero-initialize flags
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: gs_usb: Zero-initialize flags
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] softingcs: Fix memleak on registration failure in softingcs_probe
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 14/22] can: mcp251xfd: introduce and make use of mcp251xfd_is_fd_mode()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 17/22] can: flexcan: rename RX modes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/22] can: mcp251xfd: mcp251xfd_open(): make use of pm_runtime_resume_and_get()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 20/22] can: flexcan: add ethtool support to get rx/tx ring parameters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 22/22] docs: networking: device drivers: can: add flexcan
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 19/22] can: flexcan: add ethtool support to change rx-rtr setting during runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 16/22] can: flexcan: allow to change quirks at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 21/22] docs: networking: device drivers: add can sub-folder
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 18/22] can: flexcan: add more quirks to describe RX path capabilities
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 15/22] can: flexcan: move driver into separate sub directory
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 12/22] can: mcp251xfd: move chip FIFO init into separate file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 13/22] can: mcp251xfd: move ring init into separate function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/22] can: mcp251xfd: move TX handling into separate file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 11/22] can: mcp251xfd: move TEF handling into separate file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/22] can: mcp251xfd: move RX handling into separate file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/22] can: mcp251xfd: mcp251xfd_open(): open_candev() first
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/22] can: mcp251xfd: mcp251xfd.h: sort function prototypes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/22] can: mcp251xfd: mcp251xfd_handle_rxovif(): denote RX overflow message to debug + add rate limiting
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/22] can: janz-ican3: initialize dlc variable
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/22] can: mcp251xfd: add missing newline to printed strings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 03/22] can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/22] can: mcp251xfd: remove double blank lines
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/22] pull-request: can-next 2022-01-08
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] can: flexcan: add ethtool support to get rx/tx ring parameters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 7/7] docs: networking: device drivers: can: add flexcan
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC PATCH] can: flexcan: add ethtool support to get rx/tx ring parameters
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: janz-ican3: initialize dlc variable
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH] can: janz-ican3: initialize dlc variable
  • From: trix@xxxxxxxxxx
• Re: [PATCH v3 7/7] docs: networking: device drivers: can: add flexcan
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] softingcs: Fix memleak on registration failure in softingcs_probe
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• [PATCH v3 5/7] can: flexcan: add ethtool support to change rx-rtr setting during runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 6/7] docs: networking: device drivers: add can sub-folder
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 3/7] can: flexcan: rename RX modes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 7/7] docs: networking: device drivers: can: add flexcan
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 4/7] can: flexcan: add more quirks to describe RX path capabilities
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 2/7] can: flexcan: allow to change quirks at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 1/7] can: flexcan: move driver into separate sub directory
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/7] can: flexcan: change RX-FIFO feature at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] Add the first documentation for a CAN driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: Filter on controller level
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Filter on controller level
  • From: "Dr. Michael Lauer" <mickey@xxxxxxxxxx>
• [RFC PATCH 0/2] Add the first documentation for a CAN driver
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 1/2] docs: networking: device drivers: add can sub-folder
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 2/2] docs: networking: device drivers: can: add flexcan
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: rcar_canfd: Make sure we free CAN network device
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH] can: rcar_canfd: Make sure we free CAN network device
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• mcf5441x: flexcan FIFO and mailbox mode (was: Re: [PATCH v5 5/5] can: flexcan: add mcf5441x support)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3] iplink_can: add ctrlmode_{supported,_static} to the "--details --json" output
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v2 1/3] can: flexcan: change RX-FIFO feature at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: flexcan: change RX-FIFO feature at runtime
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3] iplink_can: add ctrlmode_{supported,_static} to the "--details --json" output
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH net 1/2] can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH] can: gs_usb: Zero-initialize flags
  • From: Brian Silverman <brian.silverman@xxxxxxxxxxxxxxxxx>
• [RFC PATCH] can: m_can: Add driver for M_CAN hardware in NVIDIA devices
  • From: Brian Silverman <brian.silverman@xxxxxxxxxxxxxxxxx>
• [PATCH net 2/2] can: isotp: convert struct tpcon::{idx,len} to unsigned int
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/2] can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/2] pull-request: can 2022-01-05
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] can: isotp: convert struct tpcon::{idx,len} to unsigned int
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 13/13] can: mcp251xfd: introduce and make use of mcp251xfd_is_fd_mode()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 12/13] can: mcp251xfd: move ring init into separate function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 11/13] can: mcp251xfd: move chip FIFO init into separate file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 09/13] can: mcp251xfd: move TX handling into separate file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 10/13] can: mcp251xfd: move TEF handling into separate file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 08/13] can: mcp251xfd: move RX handling into separate file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 07/13] can: mcp251xfd: mcp251xfd.h: sort function prototypes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 04/13] can: mcp251xfd: mcp251xfd_open(): open_candev() first
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 06/13] can: mcp251xfd: mcp251xfd_handle_rxovif(): denote RX overflow message to debug + add rate limiting
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 05/13] can: mcp251xfd: mcp251xfd_open(): make use of pm_runtime_resume_and_get()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 03/13] can: mcp251xfd: add missing newline to printed strings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 02/13] can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 01/13] can: mcp251xfd: remove double blank lines
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 00/13] can: mcp251xfd: cleanups and preparation to improve FIFO handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 01/15] can: usb_8dev: remove unused member echo_skb from struct usb_8dev_priv
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v1 1/1] can: mcp251x: Get rid of duplicate of_node assignment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] can: mcp251x: Get rid of duplicate of_node assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH net-next 11/15] can: do not increase tx_bytes statistics for RTR frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/15] can: do not increase rx statistics when generating a CAN rx error message frame
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/15] can: do not increase rx_bytes statistics for RTR frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 15/15] can: netlink: report the CAN controller mode supported flags
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 14/15] can: dev: reorder struct can_priv members for better packing
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 13/15] can: dev: add sanity check in can_set_static_ctrlmode()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 12/15] can: dev: replace can_priv::ctrlmode_static by can_get_static_ctrlmode()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/15] can: do not copy the payload of RTR frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/15] can: kvaser_usb: do not increase tx statistics when sending error message frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/15] can: etas_es58x: es58x_init_netdev: populate net_device::dev_port
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/15] can: sja1000: sp_probe(): use platform_get_irq() to get the interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/15] can: ti_hecc: ti_hecc_probe(): use platform_get_irq() to get the interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 03/15] can: kvaser_usb: make use of units.h in assignment of frequency
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/15] can: mcp251x: mcp251x_gpio_setup(): Get rid of duplicate of_node assignment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/15] can: usb_8dev: remove unused member echo_skb from struct usb_8dev_priv
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/15] pull-request: can-next 2022-01-05
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] can: mcp251x: Get rid of duplicate of_node assignment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] can: mcp251x: Get rid of duplicate of_node assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [syzbot] kernel BUG in pskb_expand_head
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [syzbot] kernel BUG in pskb_expand_head
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [PATCH RFC] can: isotp: convert struct tpcon::{idx,len} to unsigned int
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [syzbot] kernel BUG in pskb_expand_head
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [syzbot] kernel BUG in pskb_expand_head
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [syzbot] kernel BUG in pskb_expand_head
  • From: syzbot <syzbot+4c63f36709a642f801c5@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] can: flexcan: add ethtool support to change rx-fifo setting during runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: flexcan: change RX-FIFO feature at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: flexcan: change RX-FIFO feature at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: flexcan: change RX-FIFO feature at runtime
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] can: flexcan: add ethtool support to change rx-fifo setting during runtime
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: can-isotp: TX stmin violations
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: usb_8dev: remove unused member echo_skb from struct usb_8dev_priv
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: can-isotp: TX stmin violations
  • From: Patrick Menschel <menschel.p@xxxxxxxxx>
• Re: [PATCH v2 1/3] can: flexcan: change RX-FIFO feature at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH bpf-next v2] net: don't include filter.h from net/sock.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] can: flexcan: add ethtool support to change rx-fifo setting during runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] can: flexcan: allow to change quirks at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] can: flexcan: move driver into separate sub directory
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] can: flexcan: change RX-FIFO feature at runtime
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC PATCH 2/2] can: flexcan: add ethtool support
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 1/2] can: flexcan: allow to change quirks at runtime
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 0/2] Change flexcan features at runtime
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: can-isotp: TX stmin violations
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: can-isotp: TX stmin violations
  • From: Patrick Menschel <menschel.p@xxxxxxxxx>
• Re: can-isotp: TX stmin violations
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• can-isotp: TX stmin violations
  • From: Maik Allgöwer <maik@xxxxxxxxxxx>
• Re: [PATCH] can: flexcan: switch the i.MX series to timestamp based rx-offload
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: flexcan: switch the i.MX series to timestamp based rx-offload
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH bpf-next v2] net: don't include filter.h from net/sock.h
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH bpf-next v2] net: don't include filter.h from net/sock.h
  • From: Alexei Starovoitov <alexei.starovoitov@xxxxxxxxx>
• Re: [PATCH bpf-next v2] net: don't include filter.h from net/sock.h
  • From: Stefano Garzarella <sgarzare@xxxxxxxxxx>
• Re: [PATCH bpf-next v2] net: don't include filter.h from net/sock.h
  • From: Nikolay Aleksandrov <nikolay@xxxxxxxxxx>
• Re: [PATCH bpf-next v2] net: don't include filter.h from net/sock.h
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH bpf-next v2] net: don't include filter.h from net/sock.h
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH bpf-next] net: don't include filter.h from net/sock.h
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH bpf-next] net: don't include filter.h from net/sock.h
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [RFC 17/32] net: Kconfig: add HAS_IOPORT dependencies
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC 17/32] net: Kconfig: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: Dual CAN(FD) board w/ MACP251xfd
  • From: Patrick Menschel <menschel.p@xxxxxxxxx>
• [PATCH] can: xilinx_can: Check for error irq
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• Re: Dual CAN(FD) board w/ MACP251xfd
  • From: Gediminas Simanskis <gediminas@xxxxxxxxxx>
• Re: Dual CAN(FD) board w/ MACP251xfd
  • From: Patrick Menschel <menschel.p@xxxxxxxxx>
• Re: Dual CAN(FD) board w/ MACP251xfd
  • From: Patrick Menschel <menschel.p@xxxxxxxxx>
• Dual CAN(FD) board w/ MACP251xfd
  • From: "Dr. Michael Lauer" <mickey@xxxxxxxxxx>
• Re: [PATCH v3 0/2] CAN: Add support for setting mux
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] can: kvaser_usb: get CAN clock frequency from device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: softing_cs: fix memleak on registration failure
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] can: softing_cs: fix memleak on registration failure
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] can: kvaser_usb: get CAN clock frequency from device
  • From: Jimmy Assarsson <jimmyassarsson@xxxxxxxxx>
• [PATCH] can: kvaser_usb: get CAN clock frequency from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• RE: [net-next 6/6] can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• [PATCH] can: sja1000: Use platform_get_irq()
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH] can: ti_hecc: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH 5.15 0/3] m_can_pci bit timings for Elkhart Lake
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 5.15 3/3] can: m_can: pci: use custom bit timings for Elkhart Lake
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH 5.15 1/3] Revert "can: m_can: remove support for custom bit timing"
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH 5.15 2/3] can: m_can: make custom bittiming fields const
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH 5.15 0/3] m_can_pci bit timings for Elkhart Lake
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [syzbot] kernel BUG in pskb_expand_head
  • From: syzbot <syzbot+4c63f36709a642f801c5@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] kernel BUG in pskb_expand_head
  • From: syzbot <syzbot+4c63f36709a642f801c5@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH v3 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH v3 0/2] CAN: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] CAN: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH v2 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH v2 2/2] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH v2 0/2] CAN: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH 2/2] phy: phy-can-transceiver: Add support for setting mux
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH v6 0/4] report the controller capabilities through the netlink interface
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [net-next 6/6] can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register
  • From: "Modilaynen, Pavel" <pavel.modilaynen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RESEND PATCH v1] can: etas_es58x: es58x_init_netdev: populate net_device::dev_port
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v6 4/4] can: netlink: report the CAN controller mode supported flags
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v6 3/4] can: dev: reorder struct can_priv members for better packing
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v6 2/4] can: dev: add sanity check in can_set_static_ctrlmode()
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v6 1/4] can: dev: replace can_priv::ctrlmode_static by can_get_static_ctrlmode()
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v6 0/4] report the controller capabilities through the netlink interface
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH] can: gs_usb: detach device on reception of invalid USB data
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: gs_usb: detach device on reception of invalid USB data
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] can: mcp251x: Get rid of duplicate of_node assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] can: mcp251x: Get rid of duplicate of_node assignment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: gs_usb: detach device on reception of invalid USB data
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] can: do not copy the payload of RTR frames
  • From: Yasushi SHOJI <yashi@xxxxxxxxxxxxxxx>
• [PATCH] fixup! can: do not increase tx_bytes statistics for RTR frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6] can: kvaser_usb: make use of units.h in assignment of frequency
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v5 3/5] can: do not copy the payload of RTR frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v6] can: kvaser_usb: make use of units.h in assignment of frequency
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] can: do not copy the payload of RTR frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5 0/5] fix statistics and payload issues for error
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [GIT PULL] Networking for 5.16-rc5
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] Networking for 5.16-rc5
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH net 1/2] can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• AW: [net-next 6/6] can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register
  • From: Sven Schuchmann <schuchmann@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] can: mcp251x: Get rid of duplicate of_node assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [net-next 6/6] can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• AW: [net-next 6/6] can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register
  • From: Sven Schuchmann <schuchmann@xxxxxxxxxxxxxxxxx>
• RE: [net-next 6/6] can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• [PATCH net 1/2] can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/2] pull-request: can 2021-12-09
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/2] can: kvaser_usb: get CAN clock frequency from device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 1/8] can: bittiming: replace CAN units with the generic ones from linux/units.h
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v4 0/2] kvaser_{pciefd,usb} fixes
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v5 2/2] can: kvaser_usb: get CAN clock frequency from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v5 1/2] can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 2/2] can: kvaser_usb: get CAN clock frequency from device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v4 1/2] can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] kvaser_{pciefd,usb} fixes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] can: kvaser_pciefd: Increase correct stats->{rx,tx}_errors counter
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v3 4/4] can: kvaser_usb: Get CAN clock frequency from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH net-next 7/8] can: hi311x: hi3110_can_probe(): make use of device property API
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 8/8] can: hi311x: hi3110_can_probe(): convert to use dev_err_probe()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 6/8] can: hi311x: hi3110_can_probe(): try to get crystal clock rate from property
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 5/8] can: hi311x: hi3110_can_probe(): use devm_clk_get_optional() to get the input clock
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 4/8] ARM: dts: sun8i: r40: add node for CAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 1/8] can: bittiming: replace CAN units with the generic ones from linux/units.h
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 3/8] can: sun4i_can: add support for R40 CAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 2/8] dt-bindings: net: can: add support for Allwinner R40 CAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/8] pull-request: can-next 2021-12-08
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] can: kvaser_usb: Get CAN clock frequency from device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] can: kvaser_pciefd: Increase correct stats->{rx,tx}_errors counter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] can: kvaser_usb: Use CAN_MHZ define in assignment of frequency
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] can: kvaser_pciefd: Increase correct stats->{rx,tx}_errors counter
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] can: kvaser_usb: Get CAN clock frequency from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 4/4] can: kvaser_usb: Get CAN clock frequency from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 3/4] can: kvaser_usb: Rearrange kvaser_usb_leaf_dev_cfg to avoid forward declaration
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 2/4] can: kvaser_usb: Use CAN_MHZ define in assignment of frequency
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 1/4] can: kvaser_pciefd: Increase correct stats->{rx,tx}_errors counter
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 0/4] kvaser_{pciefd,usb} fixes
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v2 3/3] can: kvaser_usb: Get CAN clock frequency from device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 0/5] kvaser_{pciefd,usb} fixes
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v2 3/3] can: kvaser_usb: Get CAN clock frequency from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v2 2/3] can: kvaser_usb: Use CAN_MHZ define in assignment of frequency
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v2 1/3] can: kvaser_pciefd: Increase correct stats->{rx,tx}_errors counter
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v2 0/3] kvaser_{pciefd,usb} fixes
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v1 0/5] kvaser_{pciefd,usb} fixes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5 0/5] fix statistics and payload issues for error
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [net-next 6/6] can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 1/9] can: pch_can: pch_can_rx_normal: fix use after free
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [net-next 6/6] can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register
  • From: "Modilaynen, Pavel" <pavel.modilaynen@xxxxxxxxxxxxx>
• [PATCH v5 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v5 4/5] can: do not increase rx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v5 3/5] can: do not copy the payload of RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v5 2/5] can: kvaser_usb: do not increase tx statistics when sending error message frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v5 1/5] can: do not increase rx statistics when generating a CAN rx error message frame
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v5 0/5] fix statistics and payload issues for error
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v4 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH net 9/9] can: m_can: pci: use custom bit timings for Elkhart Lake
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 8/9] can: m_can: make custom bittiming fields const
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 7/9] Revert "can: m_can: remove support for custom bit timing"
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 5/9] can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 6/9] can: m_can: pci: fix incorrect reference clock rate
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 4/9] can: m_can: m_can_read_fifo: fix memory leak in error branch
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/9] can: m_can: Disable and ignore ELO interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/9] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/9] can: pch_can: pch_can_rx_normal: fix use after free
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/9] pull-request: can 2021-12-07
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] can: hi311x: Make use of device property API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] can: hi311x: Use devm_clk_get_optional() to get the input clock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] can: hi311x: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/4] can: hi311x: try to get crystal clock rate from property
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] can: hi311x: try to get crystal clock rate from property
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/4] can: hi311x: Use devm_clk_get_optional() to get the input clock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/4] can: hi311x: Make use of device property API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/4] can: hi311x: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/4] can: hi311x: try to get crystal clock rate from property
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• re: mcp251xfd 50% CPU load.. sometimes..
  • From: Markus Mirevik <markus.mirevik@xxxxxxxxxxxxxx>
• Re: drivers/net/can/usb/peak_usb/pcan_usb.c:523 pcan_usb_decode_error() error: we previously assumed 'cf' could be null (see line 503)
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: drivers/net/can/usb/peak_usb/pcan_usb.c:523 pcan_usb_decode_error() error: we previously assumed 'cf' could be null (see line 503)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: drivers/net/can/usb/peak_usb/pcan_usb.c:523 pcan_usb_decode_error() error: we previously assumed 'cf' could be null (see line 503)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• drivers/net/can/usb/peak_usb/pcan_usb.c:523 pcan_usb_decode_error() error: we previously assumed 'cf' could be null (see line 503)
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v4 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 4/5] can: do not increase rx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 3/5] can: do not copy the payload of RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 1/5] can: do not increase rx statistics when generating a CAN rx error message frame
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 2/5] can: kvaser_usb: do not increase tx statistics when sending error message frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 0/5] fix statistics and payload issues for error
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v3 2/5] can: kvaser_usb: do not increase tx statistics when sending error message frames
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v3 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v3 2/5] can: kvaser_usb: do not increase tx statistics when sending error message frames
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v3 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v3 2/5] can: kvaser_usb: do not increase tx statistics when sending error message frames
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v3 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v3 4/5] can: do not increase rx_bytes statistics for RTR frames
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v3 1/5] can: do not increase rx statistics when generating a CAN rx error message frame
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v1 1/1] can: mcp251x: Get rid of duplicate of_node assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH 0/2] CAN: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH v6 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• [PATCH 2/4] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH 4/4] can: esd_402_pci: do not increase rx_bytes statistics for RTR frames
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH 1/4] MAINTAINERS: add Stefan Mätje as maintainer for the esd electronics GmbH CAN drivers
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• [PATCH 3/4] can: esd_402_pci: do not increase rx statistics when generating a CAN rx error message frame
  • From: Stefan Mätje <stefan.maetje@xxxxxx>
• Re: [PATCH RFC v3 3/4] mux: Add support for reading mux enable state from DT
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RFC v3 3/4] mux: Add support for reading mux enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH RFC v3 3/4] mux: Add support for reading mux enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: can: add support for Allwinner R40 CAN controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH RESEND] can: m_can: Disable and ignore ELO interrupt
  • From: Brian Silverman <brian.silverman@xxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC v3 1/4] dt-bindings: mux: Increase the number of arguments in mux-controls
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH RFC v3 1/4] dt-bindings: mux: Increase the number of arguments in mux-controls
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RFC v3 1/4] dt-bindings: mux: Increase the number of arguments in mux-controls
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH RFC v3 3/4] mux: Add support for reading mux enable state from DT
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RFC v3 1/4] dt-bindings: mux: Increase the number of arguments in mux-controls
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RFC v3 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH RFC v3 3/4] mux: Add support for reading mux enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH RFC v3 1/4] dt-bindings: mux: Increase the number of arguments in mux-controls
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH v3 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v3 4/5] can: do not increase rx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v3 3/5] can: do not copy the payload of RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v3 2/5] can: kvaser_usb: do not increase tx statistics when sending error message frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v3 1/5] can: do not increase rx statistics when generating a CAN rx error message frame
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v3 0/5] fix statistics and payload issues for error
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: Re: [PATCH v0] can: raw: supplement the check to prevent the NPD
  • From: "Lin Ma" <linma@xxxxxxxxxx>
• Re: [PATCH v2 4/5] can: do not increase rx_bytes statistics for RTR frames
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v2 4/5] can: do not increase rx_bytes statistics for RTR frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v0] can: raw: supplement the check to prevent the NPD
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v2 5/5] can: do not increase tx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v2 4/5] can: do not increase rx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v2 3/5] can: do not copy the payload of RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v2 2/5] can: kvaser_usb: do not increase tx statistics when sending error message frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v2 1/5] can: do not increase rx statistics when generating a CAN rx error message frame
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v2 0/5] fix statistics and payload issues for error
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH RFC v3 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RFC v3 3/4] mux: Add support for reading mux enable state from DT
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RFC v3 1/4] dt-bindings: mux: Increase the number of arguments in mux-controls
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v0] can: raw: supplement the check to prevent the NPD
  • From: Lin Ma <linma@xxxxxxxxxx>
• Re: [PATCH v1 2/2] can: do not increase rx_bytes statistics for RTR frames
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 2/2] can: do not increase rx_bytes statistics for RTR frames
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH v3 net] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v3 net] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 net] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2 net] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 net] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v2 net] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH net-next] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2] can: bittiming: replace CAN units with the generic ones from linux/units.h
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 0/2] fix statistics for CAN RTR and Error frames
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH] can: bittiming: replace CAN units with the SI metric
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 1/2] can: do not increase rx statistics when receiving CAN error frames
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 0/2] fix statistics for CAN RTR and Error frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v1 1/2] can: do not increase rx statistics when receiving CAN error frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: bittiming: replace CAN units with the SI metric
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net-next] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v1 2/2] can: do not increase rx_bytes statistics for RTR frames
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [RFC PATCH] can: kvaser_usb: do not increase tx statistics when sending CAN error frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v1 2/2] can: do not increase rx_bytes statistics for RTR frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v1 1/2] can: do not increase rx statistics when receiving CAN error frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v1 0/2] fix statistics for CAN RTR and Error frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH] can: pch_can: pch_can_rx_normal: fix use after free
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/4] MUX: Add support for reading enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v3 2/4] dt-bindings: phy: ti,tcan104x-can: Document mux-controls property
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v3 1/4] dt-bindings: mux: Increase the number of arguments in mux-controls
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v3 3/4] mux: Add support for reading mux enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v3 0/4] MUX: Add support for reading enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v3 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH v1 1/5] can: kvaser_pciefd: Do not increase stats->rx_{packets,bytes} for error frames
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH] can: bittiming: replace CAN units with the SI metric
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH] phy: phy-can-transceiver: Make devm_gpiod_get optional
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH RFC v2 3/4] mux: Add support for reading mux enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH RFC v2 3/4] mux: Add support for reading mux enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH RFC v2 3/4] mux: Add support for reading mux enable state from DT
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RFC v2 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH RFC v2 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RFC v2 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH RFC v2 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RFC v2 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 0/2] CAN TRANSCEIVER: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v2 4/4] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v2 3/4] mux: Add support for reading mux enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v2 2/4] dt-bindings: phy: ti,tcan104x-can: Document mux-controls property
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v2 0/4] MUX: Add support for reading enable state from DT
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• [PATCH RFC v2 1/4] dt-bindings: mux: Increase the number of arguments in mux-controls
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH 3/3] ARM: dts: sun8i: r40: add node for CAN controller
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• [PATCH 3/3] ARM: dts: sun8i: r40: add node for CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• [PATCH 2/3] can: sun4i_can: add support for R40 CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: net: can: add support for Allwinner R40 CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• [PATCH 0/3] add support for Allwinner R40 CAN controller
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH net-next] can: sja1000: fix use after free in ems_pcmcia_add_card()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] can: bittiming: replace CAN units with the SI metric
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH] can: bittiming: replace CAN units with the SI metric
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v1 1/5] can: kvaser_pciefd: Do not increase stats->rx_{packets,bytes} for error frames
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH] can: bittiming: replace CAN units with the SI metric
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 4/5] can: kvaser_usb: Use CAN_MHZ define in assignment of frequency
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 4/5] can: kvaser_usb: Use CAN_MHZ define in assignment of frequency
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 4/5] can: kvaser_usb: Use CAN_MHZ define in assignment of frequency
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v1 5/5] can: kvaser_usb: Get CAN clock frequency from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v1 4/5] can: kvaser_usb: Use CAN_MHZ define in assignment of frequency
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v1 3/5] can: kvaser_usb: Do not increase stats->rx_{packets,bytes} for error frames
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v1 2/5] can: kvaser_pciefd: Increase correct stats->{rx,tx}_errors counter
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v1 1/5] can: kvaser_pciefd: Do not increase stats->rx_{packets,bytes} for error frames
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v1 0/5] kvaser_{pciefd,usb} fixes
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• Re: [PATCH net] can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH net 0/4] Fix bit timings for m_can_pci (Elkhart Lake)
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH net] can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo()
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] phy: phy-can-transceiver: Add support for setting mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] phy: phy-can-transceiver: Add support for setting mux
  • From: Aswath Govindraju <a-govindraju@xxxxxx>
• RE: [PATCH 6/6] can: peak_usb: add sysfs interface to internal device user value (resend)
  • From: Stéphane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• RE: [PATCH 6/6] can: peak_usb: add sysfs interface to internal device user value
  • From: Stéphane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] phy: phy-can-transceiver: Add support for setting mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v5 0/2] can: esd: add support for esd GmbH PCIe/402 CAN interface
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [PATCH 6/6] can: peak_usb: add sysfs interface to internal device user value
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 6/6] can: peak_usb: add sysfs interface to internal device user value
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 5/6] can: peak_usb: replace unregister_netdev() with unregister_candev()
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 4/6] can: peak_usb: allow flashing of user defined value
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 3/6] can: peak_usb: correction of a wrong field name
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 2/6] can: peak_usb: add callback to read user value of CANFD devices
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 1/6] can: peak_usb: rename a callback to a more explicit name
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 0/6] can: peak_usb: add sysfs interface to flashed value
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Re: [PATCH net 0/4] Fix bit timings for m_can_pci (Elkhart Lake)
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: 32bit x86 build broken (was: Re: [GIT PULL] Networking for 5.16-rc1)
  • From: "Rafael J. Wysocki" <rafael.j.wysocki@xxxxxxxxx>
• [syzbot] WARNING in j1939_tp_rxtimer
  • From: syzbot <syzbot+23df5d97f6d7d7e8a71c@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net 1/4] can: m_can: pci: fix incorrect reference clock rate
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH net 0/4] Fix bit timings for m_can_pci (Elkhart Lake)
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [PATCH net 1/4] can: m_can: pci: fix incorrect reference clock rate
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 1/4] can: m_can: pci: fix incorrect reference clock rate
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH net 1/4] can: m_can: pci: fix incorrect reference clock rate
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] can: etas_es58x: fix error handling
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH v2] can: etas_es58x: fix error handling
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• [PATCH net 1/4] can: m_can: pci: fix incorrect reference clock rate
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH net 2/4] Revert "can: m_can: remove support for custom bit timing"
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH net 3/4] can: m_can: make custom bittiming fields const
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH net 4/4] can: m_can: pci: use custom bit timings for Elkhart Lake
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH net 0/4] Fix bit timings for m_can_pci (Elkhart Lake)
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] can: etas_es58x: fix error handling
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>