[PATCH net-next 26/36] can: mcp251xfd: mcp251xfd_chip_clock_init(): prepare for PLL support, wait for OSC ready

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch prepares the mcp251xfd_chip_clock_init() function for PLL
support.

If the PLL is needed is must be switched on after chip reset. This
should be done in the mcp251xfd_chip_clock_init() function. Prepare
this function to wait for the OSC and PLL to be ready.

Link: https://lore.kernel.org/all/20220207131047.282110-14-mkl@xxxxxxxxxxxxxx
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index d08e0481df35..937424e5ac2b 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -429,7 +429,7 @@ static int mcp251xfd_chip_softreset(const struct mcp251xfd_priv *priv)
 
 static int mcp251xfd_chip_clock_init(const struct mcp251xfd_priv *priv)
 {
-	u32 osc;
+	u32 osc, osc_reference, osc_mask;
 	int err;
 
 	/* Activate Low Power Mode on Oscillator Disable. This only
@@ -439,10 +439,17 @@ static int mcp251xfd_chip_clock_init(const struct mcp251xfd_priv *priv)
 	osc = MCP251XFD_REG_OSC_LPMEN |
 		FIELD_PREP(MCP251XFD_REG_OSC_CLKODIV_MASK,
 			   MCP251XFD_REG_OSC_CLKODIV_10);
+	osc_reference = MCP251XFD_REG_OSC_OSCRDY;
+	osc_mask = MCP251XFD_REG_OSC_OSCRDY | MCP251XFD_REG_OSC_PLLRDY;
+
 	err = regmap_write(priv->map_reg, MCP251XFD_REG_OSC, osc);
 	if (err)
 		return err;
 
+	err = mcp251xfd_chip_wait_for_osc_ready(priv, osc_reference, osc_mask);
+	if (err)
+		return err;
+
 	return 0;
 }
 
-- 
2.34.1





[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux