Technologic Systems has rebranded as embeddedTS with the current domain eventually going offline. Update web/doc URLs to correct resource locations. Signed-off-by: Kris Bahnsen <kris@xxxxxxxxxxxxxx> --- drivers/gpio/gpio-ts5500.c | 4 ++-- drivers/net/can/sja1000/Kconfig | 2 +- drivers/net/can/sja1000/tscan1.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c index b159e92a3612..8e03614c7a24 100644 --- a/drivers/gpio/gpio-ts5500.c +++ b/drivers/gpio/gpio-ts5500.c @@ -11,11 +11,11 @@ * Actually, the following platforms have DIO support: * * TS-5500: - * Documentation: http://wiki.embeddedarm.com/wiki/TS-5500 + * Documentation: https://docs.embeddedts.com/TS-5500 * Blocks: DIO1, DIO2 and LCD port. * * TS-5600: - * Documentation: http://wiki.embeddedarm.com/wiki/TS-5600 + * Documentation: https://docs.embeddedts.com/TS-5600 * Blocks: LCD port (identical to TS-5500 LCD). */ diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 110071b26921..4b2f9cb17fc3 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -107,7 +107,7 @@ config CAN_TSCAN1 depends on ISA help This driver is for Technologic Systems' TSCAN-1 PC104 boards. - http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 + https://www.embeddedts.com/products/TS-CAN1 The driver supports multiple boards and automatically configures them: PLD IO base addresses are read from jumpers JP1 and JP2, IRQ numbers are read from jumpers JP4 and JP5, diff --git a/drivers/net/can/sja1000/tscan1.c b/drivers/net/can/sja1000/tscan1.c index 3dbba8d61afb..749002f21e27 100644 --- a/drivers/net/can/sja1000/tscan1.c +++ b/drivers/net/can/sja1000/tscan1.c @@ -7,8 +7,8 @@ /* * References: - * - Getting started with TS-CAN1, Technologic Systems, Jun 2009 - * http://www.embeddedarm.com/documentation/ts-can1-manual.pdf + * - Getting started with TS-CAN1, Technologic Systems, Feb 2022 + * https://docs.embeddedts.com/TS-CAN1 */ #include <linux/init.h> -- 2.11.0
