For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.
Fixes: b1201e44f50b ("can: xilinx CAN controller support")
Signed-off-by: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
---
drivers/net/can/xilinx_can.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 3b883e607d8b..a579b9b791ed 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1762,7 +1762,12 @@ static int xcan_probe(struct platform_device *pdev)
spin_lock_init(&priv->tx_lock);
/* Get IRQ for the device */
- ndev->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err_free;
+
+ ndev->irq = ret;
+
ndev->flags |= IFF_ECHO; /* We support local echo */
platform_set_drvdata(pdev, ndev);
--
2.25.1
