From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx> The driver uses an atomic_t variable: struct es58x_device::opened_channel_cnt to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. While the intent was to prevent race conditions, the choice of an atomic_t turns out to be a bad idea for several reasons: - implementation is incorrect and fails to decrement opened_channel_cnt when the URB allocation fails as reported in [1]. - even if opened_channel_cnt were to be correctly decremented, atomic_t is insufficient to cover edge cases: there can be a race condition in which 1/ a first process fails to allocate URBs memory 2/ a second process enters es58x_open() before the first process does its cleanup and decrements opened_channed_cnt. In which case, the second process would successfully return despite the URBs memory not being allocated. - actually, any kind of locking mechanism was useless here because it is redundant with the network stack big kernel lock (a.k.a. rtnl_lock) which is being hold by all the callers of net_device_ops:ndo_open() and net_device_ops:ndo_close(). c.f. the ASSERST_RTNL() calls in __dev_open() [2] and __dev_close_many() [3]. The atmomic_t is thus replaced by a simple u8 type and the logic to increment and decrement es58x_device:opened_channel_cnt is simplified accordingly fixing the bug reported in [1]. We do not check again for ASSERST_RTNL() as this is already done by the callers. [1] https://lore.kernel.org/linux-can/20220201140351.GA2548@kili/T/#u [2] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1463 [3] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1541 Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/20220212112713.577957-1-mailhol.vincent@xxxxxxxxxx Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx> Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/usb/etas_es58x/es58x_core.c | 9 +++++---- drivers/net/can/usb/etas_es58x/es58x_core.h | 8 +++++--- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.c b/drivers/net/can/usb/etas_es58x/es58x_core.c index 2ed2370a3166..2d73ebbf3836 100644 --- a/drivers/net/can/usb/etas_es58x/es58x_core.c +++ b/drivers/net/can/usb/etas_es58x/es58x_core.c @@ -1787,7 +1787,7 @@ static int es58x_open(struct net_device *netdev) struct es58x_device *es58x_dev = es58x_priv(netdev)->es58x_dev; int ret; - if (atomic_inc_return(&es58x_dev->opened_channel_cnt) == 1) { + if (!es58x_dev->opened_channel_cnt) { ret = es58x_alloc_rx_urbs(es58x_dev); if (ret) return ret; @@ -1805,12 +1805,13 @@ static int es58x_open(struct net_device *netdev) if (ret) goto free_urbs; + es58x_dev->opened_channel_cnt++; netif_start_queue(netdev); return ret; free_urbs: - if (atomic_dec_and_test(&es58x_dev->opened_channel_cnt)) + if (!es58x_dev->opened_channel_cnt) es58x_free_urbs(es58x_dev); netdev_err(netdev, "%s: Could not open the network device: %pe\n", __func__, ERR_PTR(ret)); @@ -1845,7 +1846,8 @@ static int es58x_stop(struct net_device *netdev) es58x_flush_pending_tx_msg(netdev); - if (atomic_dec_and_test(&es58x_dev->opened_channel_cnt)) + es58x_dev->opened_channel_cnt--; + if (!es58x_dev->opened_channel_cnt) es58x_free_urbs(es58x_dev); return 0; @@ -2215,7 +2217,6 @@ static struct es58x_device *es58x_init_es58x_dev(struct usb_interface *intf, init_usb_anchor(&es58x_dev->tx_urbs_idle); init_usb_anchor(&es58x_dev->tx_urbs_busy); atomic_set(&es58x_dev->tx_urbs_idle_cnt, 0); - atomic_set(&es58x_dev->opened_channel_cnt, 0); usb_set_intfdata(intf, es58x_dev); es58x_dev->rx_pipe = usb_rcvbulkpipe(es58x_dev->udev, diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.h b/drivers/net/can/usb/etas_es58x/es58x_core.h index 826a15871573..e5033cb5e695 100644 --- a/drivers/net/can/usb/etas_es58x/es58x_core.h +++ b/drivers/net/can/usb/etas_es58x/es58x_core.h @@ -373,8 +373,6 @@ struct es58x_operators { * queue wake/stop logic should prevent this URB from getting * empty. Please refer to es58x_get_tx_urb() for more details. * @tx_urbs_idle_cnt: number of urbs in @tx_urbs_idle. - * @opened_channel_cnt: number of channels opened (c.f. es58x_open() - * and es58x_stop()). * @ktime_req_ns: kernel timestamp when es58x_set_realtime_diff_ns() * was called. * @realtime_diff_ns: difference in nanoseconds between the clocks of @@ -384,6 +382,10 @@ struct es58x_operators { * in RX branches. * @rx_max_packet_size: Maximum length of bulk-in URB. * @num_can_ch: Number of CAN channel (i.e. number of elements of @netdev). + * @opened_channel_cnt: number of channels opened. Free of race + * conditions because its two users (net_device_ops:ndo_open() + * and net_device_ops:ndo_close()) guarantee that the network + * stack big kernel lock (a.k.a. rtnl_mutex) is being hold. * @rx_cmd_buf_len: Length of @rx_cmd_buf. * @rx_cmd_buf: The device might split the URB commands in an * arbitrary amount of pieces. This buffer is used to concatenate @@ -406,7 +408,6 @@ struct es58x_device { struct usb_anchor tx_urbs_busy; struct usb_anchor tx_urbs_idle; atomic_t tx_urbs_idle_cnt; - atomic_t opened_channel_cnt; u64 ktime_req_ns; s64 realtime_diff_ns; @@ -415,6 +416,7 @@ struct es58x_device { u16 rx_max_packet_size; u8 num_can_ch; + u8 opened_channel_cnt; u16 rx_cmd_buf_len; union es58x_urb_cmd rx_cmd_buf; base-commit: a6df953f0178c8a11fb2de95327643b622077018 -- 2.34.1
