On Tue. 8 Mar 2022 at 17:16, Pavel Skripkin <paskripkin@xxxxxxxxx> wrote:
> Syzbot reported warning in usb_submit_urb() which is caused by wrong
> endpoint type. We should check that in endpoint is actually present to
> prevent this warning
>
> Found pipes are now saved to struct mcba_priv and code uses them directly
> instead of making pipes in place.
>
> Fail log:
>
> usb 5-1: BOGUS urb xfer, pipe 3 != type 1
> WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
> Modules linked in:
> CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
> Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
> Workqueue: usb_hub_wq hub_event
> RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
> ...
> Call Trace:
> <TASK>
> mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
> mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
> usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
> call_driver_probe drivers/base/dd.c:517 [inline]
>
> Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@xxxxxxxxxxxxxxxxxxxxxxxxx
> Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
> Signed-off-by: Pavel Skripkin <paskripkin@xxxxxxxxx>
> ---
>
> Changes from RFT(RFC):
> - Add missing out pipe check
> - Use found pipes instead of making pipes in place
> - Do not hide usb_find_common_endpoints() error
>
> ---
> drivers/net/can/usb/mcba_usb.c | 22 +++++++++++++++-------
> 1 file changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
> index 77bddff86252..91e79a2d5ae5 100644
> --- a/drivers/net/can/usb/mcba_usb.c
> +++ b/drivers/net/can/usb/mcba_usb.c
> @@ -33,10 +33,6 @@
> #define MCBA_USB_RX_BUFF_SIZE 64
> #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
>
> -/* MCBA endpoint numbers */
> -#define MCBA_USB_EP_IN 1
> -#define MCBA_USB_EP_OUT 1
> -
> /* Microchip command id */
> #define MBCA_CMD_RECEIVE_MESSAGE 0xE3
> #define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5
> @@ -83,6 +79,8 @@ struct mcba_priv {
> atomic_t free_ctx_cnt;
> void *rxbuf[MCBA_MAX_RX_URBS];
> dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
> + int rx_pipe;
> + int tx_pipe;
> };
>
> /* CAN frame */
> @@ -269,7 +267,7 @@ static netdev_tx_t mcba_usb_xmit(struct mcba_priv *priv,
> memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE);
>
> usb_fill_bulk_urb(urb, priv->udev,
> - usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf,
> + priv->tx_pipe, buf,
Nitpick: you might want to put more arguments per line (up to the 80
characters limit).
> MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback,
> ctx);
>
> @@ -608,7 +606,7 @@ static void mcba_usb_read_bulk_callback(struct urb *urb)
> resubmit_urb:
>
> usb_fill_bulk_urb(urb, priv->udev,
> - usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT),
> + priv->rx_pipe,
> urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE,
> mcba_usb_read_bulk_callback, priv);
>
> @@ -653,7 +651,7 @@ static int mcba_usb_start(struct mcba_priv *priv)
> urb->transfer_dma = buf_dma;
>
> usb_fill_bulk_urb(urb, priv->udev,
> - usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
> + priv->rx_pipe,
> buf, MCBA_USB_RX_BUFF_SIZE,
> mcba_usb_read_bulk_callback, priv);
> urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
> @@ -807,6 +805,13 @@ static int mcba_usb_probe(struct usb_interface *intf,
> struct mcba_priv *priv;
> int err;
> struct usb_device *usbdev = interface_to_usbdev(intf);
> + struct usb_endpoint_descriptor *in, *out;
> +
> + err = usb_find_common_endpoints(intf->cur_altsetting, &in, &out, NULL, NULL);
> + if (err) {
> + dev_err(&intf->dev, "Can't find endpoints\n");
> + return err;
> + }
>
> netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
> if (!netdev) {
> @@ -852,6 +857,9 @@ static int mcba_usb_probe(struct usb_interface *intf,
> goto cleanup_free_candev;
> }
>
> + priv->rx_pipe = usb_rcvbulkpipe(priv->udev, in->bEndpointAddress);
> + priv->tx_pipe = usb_sndbulkpipe(priv->udev, out->bEndpointAddress);
> +
> devm_can_led_init(netdev);
>
> /* Start USB dev only if we have successfully registered CAN device */
Aside from the nitpick, it looks good to me.
Reviewed-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
Yours sincerely,
Vincent Mailhol
