Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning
Found pipes are now saved to struct mcba_priv and code uses them directly
instead of making pipes in place.
Fail log:
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
...
Call Trace:
<TASK>
mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:517 [inline]
Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@xxxxxxxxxxxxxxxxxxxxxxxxx
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Signed-off-by: Pavel Skripkin <paskripkin@xxxxxxxxx>
---
Changes from RFT(RFC):
- Add missing out pipe check
- Use found pipes instead of making pipes in place
- Do not hide usb_find_common_endpoints() error
---
drivers/net/can/usb/mcba_usb.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index 77bddff86252..91e79a2d5ae5 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -33,10 +33,6 @@
#define MCBA_USB_RX_BUFF_SIZE 64
#define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
-/* MCBA endpoint numbers */
-#define MCBA_USB_EP_IN 1
-#define MCBA_USB_EP_OUT 1
-
/* Microchip command id */
#define MBCA_CMD_RECEIVE_MESSAGE 0xE3
#define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5
@@ -83,6 +79,8 @@ struct mcba_priv {
atomic_t free_ctx_cnt;
void *rxbuf[MCBA_MAX_RX_URBS];
dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
+ int rx_pipe;
+ int tx_pipe;
};
/* CAN frame */
@@ -269,7 +267,7 @@ static netdev_tx_t mcba_usb_xmit(struct mcba_priv *priv,
memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE);
usb_fill_bulk_urb(urb, priv->udev,
- usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf,
+ priv->tx_pipe, buf,
MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback,
ctx);
@@ -608,7 +606,7 @@ static void mcba_usb_read_bulk_callback(struct urb *urb)
resubmit_urb:
usb_fill_bulk_urb(urb, priv->udev,
- usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT),
+ priv->rx_pipe,
urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE,
mcba_usb_read_bulk_callback, priv);
@@ -653,7 +651,7 @@ static int mcba_usb_start(struct mcba_priv *priv)
urb->transfer_dma = buf_dma;
usb_fill_bulk_urb(urb, priv->udev,
- usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
+ priv->rx_pipe,
buf, MCBA_USB_RX_BUFF_SIZE,
mcba_usb_read_bulk_callback, priv);
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -807,6 +805,13 @@ static int mcba_usb_probe(struct usb_interface *intf,
struct mcba_priv *priv;
int err;
struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *in, *out;
+
+ err = usb_find_common_endpoints(intf->cur_altsetting, &in, &out, NULL, NULL);
+ if (err) {
+ dev_err(&intf->dev, "Can't find endpoints\n");
+ return err;
+ }
netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
if (!netdev) {
@@ -852,6 +857,9 @@ static int mcba_usb_probe(struct usb_interface *intf,
goto cleanup_free_candev;
}
+ priv->rx_pipe = usb_rcvbulkpipe(priv->udev, in->bEndpointAddress);
+ priv->tx_pipe = usb_sndbulkpipe(priv->udev, out->bEndpointAddress);
+
devm_can_led_init(netdev);
/* Start USB dev only if we have successfully registered CAN device */
--
2.35.1
