This patch renames mcp251xfd_chip_clock_enable() into mcp251xfd_chip_wake() as this function actually wakes the chip. Additionally the documentation is adopted. Link: https://lore.kernel.org/all/20220207131047.282110-12-mkl@xxxxxxxxxxxxxx Co-developed-by: Magnus Aagaard Sørensen <mas@xxxxxxxxxxxxxxxxxx> Signed-off-by: Magnus Aagaard Sørensen <mas@xxxxxxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- .../net/can/spi/mcp251xfd/mcp251xfd-core.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index bc10ca1e7384..154e6c376670 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -292,22 +292,23 @@ mcp251xfd_chip_wait_for_osc_ready(const struct mcp251xfd_priv *priv, return -ETIMEDOUT; } -static int mcp251xfd_chip_clock_enable(const struct mcp251xfd_priv *priv) +static int mcp251xfd_chip_wake(const struct mcp251xfd_priv *priv) { u32 osc, osc_reference, osc_mask; int err; - /* Set Power On Defaults for "Clock Output Divisor" and remove - * "Oscillator Disable" bit. + /* For normal sleep on MCP2517FD and MCP2518FD, clearing + * "Oscillator Disable" will wake the chip. For low power mode + * on MCP2518FD, asserting the chip select will wake the + * chip. Writing to the Oscillator register will wake it in + * both cases. */ osc = FIELD_PREP(MCP251XFD_REG_OSC_CLKODIV_MASK, MCP251XFD_REG_OSC_CLKODIV_10); osc_reference = MCP251XFD_REG_OSC_OSCRDY; osc_mask = MCP251XFD_REG_OSC_OSCRDY | MCP251XFD_REG_OSC_PLLRDY; - /* Note: - * - * If the controller is in Sleep Mode the following write only + /* If the controller is in Sleep Mode the following write only * removes the "Oscillator Disable" bit and powers it up. All * other bits are unaffected. */ @@ -332,10 +333,10 @@ static int mcp251xfd_chip_softreset_do(const struct mcp251xfd_priv *priv) const __be16 cmd = mcp251xfd_cmd_reset(); int err; - /* The Set Mode and SPI Reset command only seems to works if - * the controller is not in Sleep Mode. + /* The Set Mode and SPI Reset command only works if the + * controller is not in Sleep Mode. */ - err = mcp251xfd_chip_clock_enable(priv); + err = mcp251xfd_chip_wake(priv); if (err) return err; -- 2.34.1
