Linux USB Users

• Thread Index

• [PATCH] USB: gadget: g_ether: fix kernel panic in gether_setup
  • From: tom.leiming@xxxxxxxxx
• Re: [PATCH] [USB] Use normalized sense when emulating autosense
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [RESEND PATCH 1/2] ehci: Support for Intel Moorestown MPH and OTG host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB Disconnect due to OVER current change with wireless ralink device RT3572
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB Disconnect due to OVER current change with wireless ralink device RT3572
  • From: Greg KH <greg@xxxxxxxxx>
• Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]
  • From: Jiri Slaby <jirislaby@xxxxxxxxx>
• Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: CDC ACM interrupt endpoint polling
  • From: Yauheni Kaliuta <yauheni.kaliuta@xxxxxxxxx>
• USB Disconnect due to OVER current change with wireless ralink device RT3572
  • From: suman <vijayendra.suman@xxxxxxxxx>
• Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]
  • From: Jiri Slaby <jirislaby@xxxxxxxxx>
• Re: CDC ACM interrupt endpoint polling
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: CDC ACM interrupt endpoint polling
  • From: Yauheni Kaliuta <yauheni.kaliuta@xxxxxxxxx>
• Re: ALSA -18 infinite loop
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [PATCH 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver
  • From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
• Re: [PATCH] [USB] Allow retrieval of the Caching mode page
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• RE: [RESEND PATCH 1/2] ehci: Support for Intel Moorestown MPH and OTG host
  • From: "Wu, Hao" <hao.wu@xxxxxxxxx>
• Re: [PATCH] [USB] Allow retrieval of the Caching mode page
  • From: Matthew Dharm <mdharm-kernel@xxxxxxxxxxxxxxxxxx>
• [PATCH] [USB] Allow retrieval of the Caching mode page
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• Re: [PATCH 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]
  • From: Jiri Slaby <jirislaby@xxxxxxxxx>
• [PATCH] [USB] Use normalized sense when emulating autosense
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• RE: [PATCH][RFC] xhci fixes
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: CDC ACM interrupt endpoint polling
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: ALSA -18 infinite loop
  • From: Rahul Ruikar <rahul.ruikar@xxxxxxxxx>
• Linux USB tree merge window is closed
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] USB: ssu100: remove max_packet_size calculation
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• Re: about swapping the dummy qtd in qh_append_tds
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1 resend] add OCPOL and Power Polarity flags to ehci-mxc
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] MUSB: fix kernel WARNING/oops when unloading module in OTG mode
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] omap: am3517: fix build break
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: accept some invalid ep0-maxpacket values
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]
  • From: Jiri Slaby <jirislaby@xxxxxxxxx>
• Re: [PATCH V5 9/9] Add Synopsys DesignWare HS USB OTG driver kernel configuration and Makefile.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• about swapping the dummy qtd in qh_append_tds
  • From: guo jerry <tuffkidtt@xxxxxxxxx>
• Re: [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: accept some invalid ep0-maxpacket values
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: accept some invalid ep0-maxpacket values
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH V5 0/9] Add Synopsys DesignWare HS USB OTG driver
  • From: fushen chen <fchen@xxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 12/22] pcmcia: remove the "Finally, report what we've done" message
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 07/22] pcmcia: move config_{base,index,regs} to struct pcmcia_device
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 11/22] pcmcia: use autoconfiguration feature for ioports and iomem
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/22] pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 06/22] pcmcia: simplify IntType
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/22] pcmcia: move Vpp setup to struct pcmcia_device
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/22] pcmcia: introduce autoconfiguration feature
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport
  • From: Pratyush ANAND <pratyush.anand@xxxxxx>
• Re: Regression since 2.6.35: mct_u232 and U232-P9 usb serial adapter
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: accept some invalid ep0-maxpacket values
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] ehci: Support for Intel Moorestown MPH and OTG host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ALSA -18 infinite loop
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: ALSA -18 infinite loop
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] omap: am3517: fix build break
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] MUSB: fix kernel WARNING/oops when unloading module in OTG mode
  • From: Jon Povey <Jon.Povey@xxxxxxxxxxxxxxx>
• CDC ACM interrupt endpoint polling
  • From: Yauheni Kaliuta <yauheni.kaliuta@xxxxxxxxx>
• Re: Regression since 2.6.35: mct_u232 and U232-P9 usb serial adapter
  • From: "Eric Shattow \"Eprecocious\"" <lucent@xxxxxxxxx>
• [PATCH] omap: am3517: fix build break
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH V5 2/9] Add Synopsys DesignWare HS USB OTG driver framework.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V5 1/9] Add Synopsys DesignWare HS USB OTG Control and Status Register (CSR).
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Regression since 2.6.35: mct_u232 and U232-P9 usb serial adapter
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 1/1 resend] add OCPOL and Power Polarity flags to ehci-mxc
  • From: tstone@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx (Tim Sander)
• Re: ALSA -18 infinite loop
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• [RESEND PATCH 2/2] ehci: Support Intel Moorestown EHCI controller SRAM QH/QTD/ITD/SITD pool caching
  • From: Hao Wu <hao.wu@xxxxxxxxx>
• [RESEND PATCH 1/2] ehci: Support for Intel Moorestown MPH and OTG host
  • From: Hao Wu <hao.wu@xxxxxxxxx>
• [RESEND PATCH 0/2] ehci patches for Intel Moorestown MPH and OTG host
  • From: Hao Wu <hao.wu@xxxxxxxxx>
• Re: [PATCH V5 2/9] Add Synopsys DesignWare HS USB OTG driver framework.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V5 1/9] Add Synopsys DesignWare HS USB OTG Control and Status Register (CSR).
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V5 0/9] Add Synopsys DesignWare HS USB OTG driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Regression since 2.6.35: mct_u232 and U232-P9 usb serial adapter
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: Regression since 2.6.35: mct_u232 and U232-P9 usb serial adapter
  • From: "Eric Shattow \"Eprecocious\"" <lucent@xxxxxxxxx>
• [PATCH V5 0/9] Add Synopsys DesignWare HS USB OTG driver
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 1/9] Add Synopsys DesignWare HS USB OTG Control and Status Register (CSR).
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 4/9] Add Synopsys DesignWare HS USB OTG HCD function.
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 3/9] Add Synopsys DesignWare HS USB OTG Core Interface Layer (CIL).
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 8/9] Add Synopsys DesignWare HS USB OTG PCD interrupt function.
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 7/9] Add Synopsys DesignWare HS USB OTG PCD function.
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 5/9] Add Synopsys DesignWare HS USB OTG HCD interrupt function.
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 2/9] Add Synopsys DesignWare HS USB OTG driver framework.
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 6/9] Add Synopsys DesignWare HS USB OTG HCD queue function.
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 9/9] Add Synopsys DesignWare HS USB OTG driver kernel configuration and Makefile.
  • From: Fushen Chen <fchen@xxxxxxx>
• [PATCH V5 0/9] *** Add Synopsys DesignWare HS USB OTG driver ***
  • From: Fushen Chen <fchen@xxxxxxx>
• Re: [PATCH] USB: accept some invalid ep0-maxpacket values
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: Adding SuperSpeed support to dummy_hcd
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [patch 1/1] drivers/usb/gadget/amd5536udc.c: fix error path
  • From: akpm@xxxxxxxxxxxxxxxxxxxx
• Re: [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD
  • From: Alexey Charkov <alchark@xxxxxxxxx>
• Re: [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD
  • From: Alexey Charkov <alchark@xxxxxxxxx>
• Re: [PATCH] usb: r8a66597-udc: Add processing when USB was removed.
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH] usb: r8a66597-udc: Add processing when USB was removed.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/1] add OCPOL and Power Polarity flags to ehci-mxc
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD
  • From: Alexey Charkov <alchark@xxxxxxxxx>
• Re: [PATCH v2 2/3] usb: trivial Kconfig cleanups
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [RFC] [PATCH 6/7] usb: ehci: Introduce CONFIG_USB_EHCI_HCD_OMAP3
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• EHCI hardware tests Test J Test K in Linux
  • From: Tim Sander <tim01@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] add OCPOL and Power Polarity flags to ehci-mxc
  • From: "Tim Sander" <tim.sander@xxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Regression since 2.6.35: mct_u232 and U232-P9 usb serial adapter
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Regression since 2.6.35: mct_u232 and U232-P9 usb serial adapter
  • From: Greg KH <greg@xxxxxxxxx>
• Re: ALSA -18 infinite loop
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: r8a66597-udc: Add processing when USB was removed.
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: "felipe.contreras@xxxxxxxxx" <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: "felipe.contreras@xxxxxxxxx" <felipe.contreras@xxxxxxxxx>
• Re: ALSA -18 infinite loop
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• RE: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: "Liu, Bob" <Bob.Liu@xxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [PATCH v5] usb: usb3.0 ch9 definitions
  • From: tlinder@xxxxxxxxxxxxxx
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/3] usb: fix Kconfig warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Regression since 2.6.35: mct_u232 and U232-P9 usb serial adapter
  • From: "Eric Shattow \"Eprecocious\"" <lucent@xxxxxxxxx>
• Re: ALSA -18 infinite loop
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• RE: [PATCH 2/3] musb: add musb support for AM35x
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: ALSA -18 infinite loop
  • From: Greg KH <greg@xxxxxxxxx>
• ALSA -18 infinite loop
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: [PATCH] usb: r8a66597-udc: Add processing when USB was removed.
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: pl2303 ttyUSB0: pl2303_write - failed submitting write urb, error -22
  • From: "Raju Rameshwar Uprade" <rajsingh@xxxxxxxxxxxxxxxx>
• Re: usb-skeleton.c - generates warning
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: r8a66597-udc: Add processing when USB was removed.
  • From: Yusuke Goda <yusuke.goda.sx@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH 1/2] USB: musb: gadget: fix dma mode 0 in double buffer Rx case(v1)
  • From: tom.leiming@xxxxxxxxx
• [RESEND PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: tom.leiming@xxxxxxxxx
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: usb-skeleton.c - generates warning
  • From: Andrew Worsley <amworsley@xxxxxxxxx>
• Re: usb-skeleton.c - generates warning
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 2/3] usb: trivial Kconfig cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: usb-skeleton.c - generates warning
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb-skeleton.c - generates warning
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v3 2/2] usb: dummy_hcd code simplification
  • From: Larry Bassel <lbassel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] usb: trivial Kconfig cleanups
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 2/3] usb: trivial Kconfig cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• UWB and WUSB subsystems need a maintainer
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 0/3] Add support for AM35x on MUSB
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/3] musb: add musb support for AM35x
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb-skeleton.c - generates warning
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: usb-skeleton.c - generates warning
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Manuel Reimer <Manuel.Spam@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] bluetooth: Take a runtime pm reference on hid connections
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] bluetooth: Remove some unnecessary error messages
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v2 1/3] usb: fix Kconfig warning
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 2/3] usb: trivial Kconfig cleanups
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb-skeleton.c - generates warning
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] usb: dummy_hcd code simplification
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v2 3/3] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xhci: number of interrupts
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3 2/2] usb: dummy_hcd code simplification
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] usb: USB3.0 ch11 definitions
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: pl2303 ttyUSB0: pl2303_write - failed submitting write urb, error -22
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [RFC/PATCH v2 3/3] usb: Adding SuperSpeed support to dummy_hcd
  • From: tlinder@xxxxxxxxxxxxxx
• Re: [PATCH 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: xhci: number of interrupts
  • From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: xhci: number of interrupts
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: "Liu, Bob" <Bob.Liu@xxxxxxxxxx>
• Re: [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/3] usb: fix Kconfig warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 1/3] usb: fix Kconfig warning
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2 0/3] usb: generic Kconfig fixes
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2 2/3] usb: trivial Kconfig cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• xhci: number of interrupts
  • From: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
• Re: Question about EP fifo mode in musb
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: Question about EP fifo mode in musb
  • From: Praveena NADAHALLY <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: Question about EP fifo mode in musb
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: Question about EP fifo mode in musb
  • From: Praveena NADAHALLY <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 2/3] usb: trivial Kconfig cleanups
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: internal utmi port on imx35
  • From: Tim Sander <tim01@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: trivial Kconfig cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 1/3] usb: fix Kconfig warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB gamepad driver
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 2/3] usb: trivial Kconfig cleanups
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/3] usb: geneirc Kconfig fixes
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 1/3] usb: fix Kconfig warning
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 3/3] drivers: cleanup Kconfig stuff
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 2/3] usb: trivial Kconfig cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 3/3] musb: AM35x: Workaround for fifo read issue
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/3] musb: add musb support for AM35x
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/3] AM35x: Add musb support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/3] Add support for AM35x on MUSB
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Question about EP fifo mode in musb
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V2 19/69] USB host: Adding USB ehci & ohci support for spear platform
  • From: viresh kumar <viresh.kumar@xxxxxx>
• Re: RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: pl2303 ttyUSB0: pl2303_write - failed submitting write urb, error -22
  • From: "Raju Rameshwar Uprade" <rajsingh@xxxxxxxxxxxxxxxx>
• Re: RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: Chiranjeevi Velempati <cvelempa@xxxxxxxxxxxxxx>
• Question about EP fifo mode in musb
  • From: Praveena NADAHALLY <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: pl2303 ttyUSB0: pl2303_write - failed submitting write urb, error -22
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/3] usb: USB3.0 ch11 definitions
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: USB3.0 ch11 definitions
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: USB3.0 ch11 definitions
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Manuel Reimer <Manuel.Spam@xxxxxxxxxxxxxx>
• Re: [RFC/PATCH v2 3/3] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v2 2/3] usb: dummy_hcd code simplification
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Manuel Reimer <Manuel.Spam@xxxxxxxxxxxxxx>
• [RFC/PATCH v2 3/3] usb: Adding SuperSpeed support to dummy_hcd
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [RFC/PATCH v2 2/3] usb: dummy_hcd code simplification
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH 1/3] usb: USB3.0 ch11 definitions
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH] ehci tdi : let's tdi_reset set host mode
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• internal utmi port on imx35
  • From: Tim Sander <tim01@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ehci tdi : let's tdi_reset set host mode
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH 2/3] bluetooth: Remove some unnecessary error messages
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: USB gamepad driver
  • From: Pavlos Vinieratos <pvinis@xxxxxxxxx>
• Re: USB gamepad driver
  • From: Oliver Neukum <oneukum@xxxxxxx>
• pl2303 ttyUSB0: pl2303_write - failed submitting write urb, error -22
  • From: "Raju Rameshwar Uprade" <rajsingh@xxxxxxxxxxxxxxxx>
• USB gamepad driver
  • From: Pavlos Vinieratos <pvinis@xxxxxxxxx>
• Re: [PATCH 3/3] bluetooth: Enable USB autosuspend by default on btusb
  • From: "Gustavo F. Padovan" <padovan@xxxxxxxxxxxxxx>
• Re: RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: [Bug #20182] 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [Bug #20182] 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Uclinux-dist-devel] [PATCH] USB: musb: set NAK limitation for control transfers
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v2] USB: musb: set NAK limitation for control transfers
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 2/2] USB: otg/ulpi: extend id's table.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: otg/ulpi: extend id's table.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Uclinux-dist-devel] [PATCH v2] USB: musb: set NAK limitation for control transfers
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• usb-skeleton.c - generates warning
  • From: Andrew Worsley <amworsley@xxxxxxxxx>
• Re: 2.6.31.14 fails compile with no CONFIG_PM.
  • From: Bill Pringlemeir <bpringle@xxxxxxxxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Suggestions in supporting a second instance of the Host controller driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: imx21-hcd - fix off by one resource size calculation
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH] usb: Fix linker errors with CONFIG_PM=n
  • From: Marcin Slusarz <marcin.slusarz@xxxxxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Manuel Reimer <Manuel.Spam@xxxxxxxxxxxxxx>
• Suggestions in supporting a second instance of the Host controller driver
  • From: Chiranjeevi Velempati <cvelempa@xxxxxxxxxxxxxx>
• Re: [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• Re: [PATCH] usb: Fix linker errors with CONFIG_PM=n
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [PATCH] usb: Fix linker errors with CONFIG_PM=n
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: Fix linker errors with CONFIG_PM=n
  • From: Marcin Slusarz <marcin.slusarz@xxxxxxxxx>
• [PATCH] usb: Fix linker errors with CONFIG_PM=n
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Fix compile error when CONFIG_PM=n
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Fix compile error when CONFIG_PM=n
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35
  • From: Eric Bénard <eric@xxxxxxxxxx>
• Re: [PATCH] fix oops in usbserial_cleanup function;
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35
  • From: Greg KH <greg@xxxxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Stéphane Chatty <chatty@xxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] xhci: Fix compile error when CONFIG_PM=n
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: linux-next: Tree for October 15 (usb/xhci)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: linux-next: Tree for October 15 (usb/xhci)
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: BUG: USB3.0 ?PD720200 complains about over-current
  • From: Greg KH <greg@xxxxxxxxx>
• Re: linux-next: Tree for October 15 (usb/xhci)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Stéphane Chatty <chatty@xxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Florian Echtler <floe@xxxxxxxxxxxxxx>
• Re: linux-next: Tree for October 15 (usb/xhci)
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [PATCH] HID: add absolute axis resolution calculation
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH] fix oops in usbserial_cleanup function;
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.31.14 fails compile with no CONFIG_PM.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35
  • From: Eric Bénard <eric@xxxxxxxxxx>
• Need some suggestions in design implementation for Host controller driver
  • From: Chiranjeevi Velempati <cvelempa@xxxxxxxxxxxxxx>
• Re: RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: Michał Nazarewicz <m.nazarewicz@xxxxxxxxxxx>
• Re: [PATCH] fix oops in usbserial_cleanup function;
  • From: m00150988@xxxxxxxxxx
• Re: [PATCH 3/3] USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 2/3] USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• [PATCH 3/3] USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH 00/13] USB patches (take two)
  • From: Hao Wu <hao.wu@xxxxxxxxx>
• [PATCH 2/3] USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• [PATCH 1/3] USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH] fix oops in usbserial_cleanup function;
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] fix oops in usbserial_cleanup function;
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] fix oops in usbserial_cleanup function;
  • From: m00150988@xxxxxxxxxx
• Re: [PATCH 00/13] USB patches (take two)
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH 00/13] USB patches (take two)
  • From: "Wu, Hao" <hao.wu@xxxxxxxxx>
• Re: 2.6.31.14 fails compile with no CONFIG_PM.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: 2.6.31.14 fails compile with no CONFIG_PM.
  • From: Bill Pringlemeir <bpringle@xxxxxxxxxxxx>
• Re: 2.6.31.14 fails compile with no CONFIG_PM.
  • From: Bill Pringlemeir <bpringle@xxxxxxxxxxxx>
• Re: 2.6.31.14 fails compile with no CONFIG_PM.
  • From: Greg KH <greg@xxxxxxxxx>
• 2.6.31.14 fails compile with no CONFIG_PM.
  • From: Bill Pringlemeir <bpringle@xxxxxxxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• Re: [PATCH] USB: accept some invalid ep0-maxpacket values
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] USB: accept some invalid ep0-maxpacket values
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB storage fails to initialize device for MP3 player. How to debug?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problem when USB hub is inserted
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB storage fails to initialize device for MP3 player. How to debug?
  • From: Manuel Reimer <Manuel.Spam@xxxxxxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] xHCI: PCI power management implementation
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 7/8] xHCI: bus power management implementation
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 6/8] xHCI: port remote wakeup implementation
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 5/8] xHCI: port power management implementation
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/8] usb: Fix issue with USB 3.0 devices after system resume
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/8] xHCI: change xhci_reset_device() to allocate new device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/8] xHCI: Add pointer to udev in struct xhci_virt_device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 0/8] xHCI: power management patchset
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• Re: [PATCH] [RFC] USB: EHCI: mark several functions as maybe unused
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: proposal to add small helper for error conversion
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: add absolute axis resolution calculation
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH] [RFC] USB: EHCI: mark several functions as maybe unused
  • From: Jurgen Braam <j.braam@xxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: proposal to add small helper for error conversion
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] usb: r8a66597-hcd: Change mistake of the outsw function
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: Chiranjeevi Velempati <cvelempa@xxxxxxxxxxxxxx>
• Re: RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• [PATCH] usb: r8a66597-hcd: Change mistake of the outsw function
  • From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@xxxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: proposal to add small helper for error conversion
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RNDIS is always claiming interface 0 and 1 -- Any reason
  • From: Chiranjeevi Velempati <cvelempa@xxxxxxxxxxxxxx>
• Re: proposal to add small helper for error conversion
  • From: Greg KH <greg@xxxxxxxxx>
• proposal to add small helper for error conversion
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• How to approach a USB HID device with a specialized interface???
  • From: "Rick L. Vinyard, Jr." <rvinyard@xxxxxxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Florian Echtler <floe@xxxxxxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH][RFC] USB: EHCI: add missing {endpoint_reset,clear_tt_buffer_complete} operations
  • From: Jurgen Braam <j.braam@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] bluetooth: Enable USB autosuspend by default on btusb
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 1/3] bluetooth: Take a runtime pm reference on hid connections
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH][RFC] USB: EHCI: add missing {endpoint_reset,clear_tt_buffer_complete} operations
  • From: Jurgen Braam <j.braam@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 7/8 v7] xHCI: bus power management implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 8/8 v7] xHCI: PCI power management implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/8 v7] xHCI: Add pointer to udev in struct xhci_virt_device
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Florian Echtler <floe@xxxxxxxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• [PATCH 6/8 v7] xHCI: port remote wakeup implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 5/8 v7] xHCI: port power management implementation
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 4/8 v7] usb: Fix issue with USB 3.0 devices after system resume
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/8 v7] usbcore: use kernel assigned address for devices under xHCI
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 2/8 v7] xHCI: change xhci_reset_device() to allocate new device
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 0/8 v7] xHCI: power management patchset
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: ftdi_sio serial adapter data toggle problem.
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: [PATCH 1/4 v6 RESEND] xHCI: port power management implementation
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Sangbeom Kim <sbkim73@xxxxxxxxxxx>
• [PATCH 2/4] ARM: S3C24XX: Add plaform device definition for USB High-Speed gadget controller.
  • From: Sangbeom Kim <sbkim73@xxxxxxxxxxx>
• [PATCH 1/4] ARM: S3C2416: Add USB Phy register definitions
  • From: Sangbeom Kim <sbkim73@xxxxxxxxxxx>
• [PATCH 4/4] ARM: S3C2416: Add support for USB 2.0 High-Speed gadget controller
  • From: Sangbeom Kim <sbkim73@xxxxxxxxxxx>
• [PATCH 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver
  • From: Sangbeom Kim <sbkim73@xxxxxxxxxxx>
• [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• Re: hid_ntrig prevents suspend from working
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4 v6 RESEND] xHCI: port power management implementation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: Adding SuperSpeed support to dummy_hcd
  • From: tlinder@xxxxxxxxxxxxxx
• Re: [PATCH 1/4 v6 RESEND] xHCI: port power management implementation
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3 v2 RESEND] xHCI: change xhci_reset_device() to allocate new device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Help with oops during xHCI resume
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: gadgetfs broken on MUSB and net2280?
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH 0/2 v2] S3C64XX: Fix 48M clock enable
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PATCH: ftdi_sio new VID/PIDs for various Papouch devices
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 0/2 v2] S3C64XX: Fix 48M clock enable
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• PATCH: ftdi_sio new VID/PIDs for various Papouch devices
  • From: Daniel Suchy <danny@xxxxxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: PATCH: ftdi_sio new VID/PIDs for various Papouch devices
  • From: Greg KH <gregkh@xxxxxxx>
• Re: PATCH: ftdi_sio new VID/PIDs for various Papouch devices
  • From: Daniel Suchy <danny@xxxxxxxxxx>
• Re: PATCH: ftdi_sio new VID/PIDs for various Papouch devices
  • From: Greg KH <gregkh@xxxxxxx>
• PATCH: ftdi_sio new VID/PIDs for various Papouch devices
  • From: Daniel Suchy <danny@xxxxxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• RE: [PATCH 0/2 v2] S3C64XX: Fix 48M clock enable
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 2/2] USB: s3-hsotg: Remove PHY initialization code and use CLK API
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• [PATCH 1/2] [v2]ARM: S3C64XX: Fix USB and 48M clock enable procedure
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• [PATCH 0/2 v2] S3C64XX: Fix 48M clock enable
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: gadgetfs broken on MUSB and net2280?
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: "Brokhman Tatyana" <tlinder@xxxxxxxxxxxxxx>
• RE: Help with oops during xHCI resume
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• hid_ntrig prevents suspend from working
  • From: Florian Echtler <floe@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT]patch to remove kernel thread for runtime pm from usbhid
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 2/3] usb: Add EHCI and OHCH glue for OCTEON II SOCs.
  • From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Brokhman Tatyana" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: visor: fix initialisation of UX50/TH55 devices
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Help with oops during xHCI resume
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [stable] [PATCH] USB: visor: fix initialisation of UX50/TH55 devices
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] USB: visor: fix initialisation of UX50/TH55 devices
  • From: Robert Gadsdon <rgadsdon2008@xxxxxxx>
• Re: Help with oops during xHCI resume
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3 v2 RESEND] xHCI: change xhci_reset_device() to allocate new device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] USB: visor: fix initialisation of UX50/TH55 devices
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: is there any way to recover from an STS_FATAL error interrupt in an EHCI host controller?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PDA (Clie) USB sync fails with 2.6.35, OK with 2.6.34.1. versions of visor.c visor.h
  • From: Greg KH <greg@xxxxxxxxx>
• PDA (Clie) USB sync fails with 2.6.35, OK with 2.6.34.1. versions of visor.c visor.h
  • From: Robert Gadsdon <rgadsdon@xxxxxxxxxxx>
• is there any way to recover from an STS_FATAL error interrupt in an EHCI host controller?
  • From: <carolyn.j.smith@xxxxxxxxxxxxx>
• 2.6.36-rc7: NULL pointer dereference in ehci_clear_tt_buffer_complete
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: don't trust report_size for buffer size
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: [PATCH] usb: don't trust report_size for buffer size
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: [PATCH] usb: don't trust report_size for buffer size
  • From: Kees Cook <kees.cook@xxxxxxxxxxxxx>
• Re: g_ether broken on musb
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH] usb: don't trust report_size for buffer size
  • From: Kees Cook <kees.cook@xxxxxxxxxxxxx>
• [PATCH] USB: ftdi_sio: set device latency timeout at port probe
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• gadgetfs broken on MUSB and net2280?
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH 1/3] MIPS: Octeon: Add register definitions for ehci/ohci USB glue logic.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: Add platform device and Kconfig for Octeon USB EHCI/OHCI
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: Add EHCI and OHCH glue for OCTEON II SOCs.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: otg/ulpi: extend id's table.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: g_ether broken on musb
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Almost no connection during this week
  • From: "Balbi, Felipe" <balbi@xxxxxx>
• Re: MTP gadget driver
  • From: Brett Werling <bwerl.dev@xxxxxxxxx>
• RE: Help with oops during xHCI resume
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: g_ether broken on musb
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• RE: [PATCH 2/3 v2 RESEND] xHCI: change xhci_reset_device() to allocate new device
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH 2/3 v2 RESEND] xHCI: change xhci_reset_device() to allocate new device
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: g_ether broken on musb
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: g_ether broken on musb
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: g_ether broken on musb
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: MTP gadget driver
  • From: Roger Quadros <roger.quadros@xxxxxxxxx>
• Re: [PATCH 2/2] USB: otg/ulpi: extend id's table.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: S3C64XX: Fix USB and 48M clock enable procedure
  • From: Maurus Cuelenaere <mcuelenaere@xxxxxxxxx>
• [PATCH] usb: musb: move exit code from musb_remove to musb_shutdown
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: g_ether broken on musb
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 2/2] USB: otg/ulpi: extend id's table.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 2/2] USB: otg/ulpi: extend id's table.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH 1/2] USB: otg/ulpi: improve ulpi phy detection.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH 0/2] USB: otg/ulpi: Improve ulpi phy detection
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] Add Opticon OPN2001 write support
  • From: Greg KH <greg@xxxxxxxxx>
• [RFC/PATCH 2/2] usb: Adding SuperSpeed support to dummy_hcd
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [RFC/PATCH 1/2] usb: usb30 ch11 definitions
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• Re: ftdi_sio driver slow
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 2/3] Add Opticon OPN2001 write support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/3] Add Opticon OPN2001 write support
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Libusb-devel] [ANN] HID dumping tool
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH 2/3] Add Opticon OPN2001 write support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v5] usb: usb3.0 ch9 definitions
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v5] usb: usb3.0 ch9 definitions
  • From: tlinder@xxxxxxxxxxxxxx
• Re: [PATCH v5] usb: usb3.0 ch9 definitions
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxxxx>
• [PATCH 3/3] Whitespace fixes in opticon driver
  • From: Alon Ziv <alon+git@xxxxxxxxxxx>
• [PATCH 2/3] Add Opticon OPN2001 write support
  • From: Alon Ziv <alon+git@xxxxxxxxxxx>
• [PATCH 1/3] Fix long-standing bugs in opticon driver
  • From: Alon Ziv <alon+git@xxxxxxxxxxx>
• [PATCH 0/3] opticon driver fixes
  • From: Alon Ziv <alon+git@xxxxxxxxxxx>
• Re: g_ether broken on musb
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [Libusb-devel] [ANN] HID dumping tool
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• [PATCH 2/2] USB: s3-hsotg: Remove PHY initialization code and use CLK API
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• [PATCH 1/2] ARM: S3C64XX: Fix USB and 48M clock enable procedure
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• [PATCH 0/2] S3C64XX: Fix 48M clock enable
  • From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
• [PATCH v5] usb: usb3.0 ch9 definitions
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• Re: MTP gadget driver
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• Re: [Libusb-devel] [ANN] HID dumping tool
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• Re: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 2/2] USB: musb: gadget: fix MUSB_TXMAXP and MUSB_RXMAXP configuration
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCH 2/3 v2 RESEND] xHCI: change xhci_reset_device() to allocate new device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3 v2 RESEND] xHCI: change xhci_reset_device() to allocate new device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] usb: otg: introduce otg_notify_event and otg_get_last_event
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 3/3] USB: usbtest : Add tests to ensure HCDs can accept byte aligned buffers.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 0/3] usb: Add OCTEON II USB support.
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 2/3] usb: Add EHCI and OHCH glue for OCTEON II SOCs.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] MIPS: Add platform device and Kconfig for Octeon USB EHCI/OHCI
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>