Signed-off-by: Felipe Contreras <felipe.contreras@xxxxxxxxx> --- drivers/usb/core/Kconfig | 3 --- drivers/usb/gadget/Kconfig | 2 +- drivers/usb/musb/Kconfig | 17 ++++------------- 3 files changed, 5 insertions(+), 17 deletions(-) diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 9eed5b5..8f57a26 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -110,8 +110,6 @@ config USB_OTG bool depends on USB && EXPERIMENTAL depends on USB_SUSPEND - default n - config USB_OTG_WHITELIST bool "Rely on OTG Targeted Peripherals List" @@ -139,4 +137,3 @@ config USB_OTG_BLACKLIST_HUB external hubs. OTG hosts are allowed to reduce hardware and software costs by not supporting external hubs. So are "Embedded Hosts" that don't offer OTG support. - diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 19a6eb6..c530bc6 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -125,7 +125,6 @@ choice config USB_GADGET_AT91 boolean "Atmel AT91 USB Device Port" depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45 - select USB_GADGET_SELECTED help Many Atmel AT91 processors (such as the AT91RM2000) have a full speed USB Device Port with support for five configurable @@ -139,6 +138,7 @@ config USB_AT91 tristate depends on USB_GADGET_AT91 default USB_GADGET + select USB_GADGET_SELECTED config USB_GADGET_ATMEL_USBA boolean "Atmel USBA" diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index cfd38ed..20895c4 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -8,12 +8,12 @@ comment "Enable Host or Gadget support to see Inventra options" # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC + tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on (USB || USB_GADGET) depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523)) select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) select TWL4030_USB if MACH_OMAP_3430SDP select USB_OTG_UTILS - tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then @@ -79,8 +79,8 @@ choice # use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support; # OTG needs both roles, not just USB_MUSB_HOST. config USB_MUSB_HOST - depends on USB bool "USB Host" + depends on USB help Say Y here if your system supports the USB host role. If it has a USB "A" (rectangular), "Mini-A" (uncommon), @@ -90,8 +90,8 @@ config USB_MUSB_HOST # use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral # side support ... OTG needs both roles config USB_MUSB_PERIPHERAL - depends on USB_GADGET bool "USB Peripheral (gadget stack)" + depends on USB_GADGET select USB_GADGET_MUSB_HDRC help Say Y here if your system supports the USB peripheral role. @@ -100,8 +100,8 @@ config USB_MUSB_PERIPHERAL (With a "Mini-AB" connector, you should enable USB OTG.) config USB_MUSB_OTG - depends on USB && USB_GADGET && PM && EXPERIMENTAL bool "Both host and peripheral: USB OTG (On The Go) Device" + depends on USB && USB_GADGET && PM && EXPERIMENTAL select USB_GADGET_MUSB_HDRC select USB_OTG help @@ -125,14 +125,6 @@ config USB_MUSB_OTG endchoice -# enable peripheral support (including with OTG) -config USB_GADGET_MUSB_HDRC - bool - depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG) -# default y -# select USB_GADGET_DUALSPEED -# select USB_GADGET_SELECTED - # enables host support (including with OTG) config USB_MUSB_HDRC_HCD bool @@ -140,7 +132,6 @@ config USB_MUSB_HDRC_HCD select USB_OTG if USB_GADGET_MUSB_HDRC default y - config MUSB_PIO_ONLY bool 'Disable DMA (always use PIO)' depends on USB_MUSB_HDRC -- 1.7.3.1.2.g7fe2b -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
