On 10/21/2010 07:51 PM, Jiri Slaby wrote:
> On 10/21/2010 12:01 AM, akpm@xxxxxxxxxxxxxxxxxxxx wrote:
>> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
>
> Well, this release happens to be a multimedia failure :(.
>
> I hit another regression against mmotm 2010-10-13-17-13, where
> 0413:6029 (DVB USB tuner) can't be inited when plugged in. Even lsusb
> waits inifitely.
Revert of this commit helps:
commit 99ef217e01780668ac21d600eaf4acd3f7666a02
Author: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Date: Sun Sep 26 22:58:28 2010 -0300
[media] tda18271: allow restricting max out to 4 bytes
By default, tda18271 tries to optimize I2C bus by updating all registers
at the same time. Unfortunately, some devices doesn't support it.
The current logic has a problem when small_i2c is equal to 8, since
there
are some transfers using 11 + 1 bytes.
Fix the problem by enforcing the max size at the right place, and allows
reducing it to max = 3 + 1.
Acked-by: Michael Krufky <mkrufky@xxxxxxxxxxxxxx>
Acked-by: Sri Deevi <Srinivasa.Deevi@xxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> usb 2-6: new high speed USB device using ehci_hcd and address 5
> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will
> try to load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold)
> af9013: firmware version:4.95.0.0
> DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
> tda18271 18-00c0: creating new instance
> TDA18271HD/C2 detected @ 18-00c0
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x0, len = 39,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: recv bulk message failed:-71
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x5, len = 11,
> i2c_transfer returned: -1
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> af9015: bulk message failed:-71 (9/0)
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x13, len = 1,
> i2c_transfer returned: -71
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> af9015: bulk message failed:-71 (9/0)
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x13, len = 1,
> i2c_transfer returned: -71
>
> regards,
--
js
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
