Linux USB Users
[Prev Page][Next Page]
- Re: [GIT PULL] xhci: Revert TD fragment hacks.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/4] Revert "xhci: Avoid infinite loop when sg urb requires too many trbs"
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 2/4] Revert "xhci: Set scatter-gather limit to avoid failed block writes."
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 4/4] Revert "usb: xhci: Link TRB must not occur within a USB payload burst"
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 1/4] xhci 1.0: Limit arbitrarily-aligned scatter gather.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [GIT PULL] xhci: Revert TD fragment hacks.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] storage: accept some UAS devices if streams are unavailable
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Bug#738113: linux-image-3.12-1-amd64: regression in xhci_hcd: USB3 doesn't work anymore
- From: Andreas Cadhalpun <andreas.cadhalpun@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] storage: accept some UAS devices if streams are unavailable
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] uhci-platform: Change compatible string from platform-uhci to generic-uhci
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ohci-/ehci-platform: Change compatible string to ?hci-platform
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] usb/host/Kconfig: ohci- / ehci-platform make sure PHY_GENERIC is available
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: ohci-/ehci-platform: Change compatible string to ?hci-platform
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH 2/2] USB: ehci-platform: check for platform data misconfiguration
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] usb/host/Kconfig: ohci- / ehci-platform make sure PHY_GENERIC is available
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] USB: ohci-platform: check for platform data misconfiguration
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 2/2] xhci-platform: Change compatible string from xhci-platform to generic-xhci
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 1/2] uhci-platform: Change compatible string from platform-uhci to generic-uhci
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- -next tree build failure (20140211)
- From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] ohci-platform: Change compatible string from usb-ohci to generic-ohci
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Bug#738113: linux-image-3.12-1-amd64: regression in xhci_hcd: USB3 doesn't work anymore
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/2] ohci-platform: Change compatible string from usb-ohci to generic-ohci
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 2/2] ehci-platform: Change compatible string from usb-ehci to generic-ehci
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 0/2] ohci-/ehci-platform: Change compatible string to generic-?hci
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: USB storage vanilla kernel 3.13 hang on DELL PRECISION M6400
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] USB: ohci-platform: check for platform data misconfiguration
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] USB: ehci-platform: check for platform data misconfiguration
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ohci-/ehci-platform: Change compatible string to ?hci-platform
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v3 1/1] USB: EHCI: wait more than 3ms until the device enters full-speed idle
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ohci-/ehci-platform: Change compatible string to ?hci-platform
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/2] ohci-platform: Change compatible string from usb-ohci to ohci-platform
- From: Kumar Gala <galak@xxxxxxxxxxxxxx>
- Re: [PATCH] hub: make compile without CONFIG_PM
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ohci-/ehci-platform: Change compatible string to ?hci-platform
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ehci-platform: Change compatible string from usb-ehci to ehci-platform
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] ohci-platform: Change compatible string from usb-ohci to ohci-platform
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ohci-platform: Change compatible string from usb-ohci to ohci-platform
- From: Kumar Gala <galak@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ehci-platform: Change compatible string from usb-ehci to ehci-platform
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH] hub: make compile without CONFIG_PM
- [PATCH 2/2] ehci-platform: Change compatible string from usb-ehci to ehci-platform
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- ohci-/ehci-platform: Change compatible string to ?hci-platform
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 1/2] ohci-platform: Change compatible string from usb-ohci to ohci-platform
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [RFT] usb: Disable Link PM if setting device-initiated timeout fails.
- From: yoma sophian <sophian.yoma@xxxxxxxxx>
- Re: [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree
- From: Roger Quadros <rogerq@xxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH] USB: ELAN: Remove useless "default M" lines
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- [PATCH v5] tools: usb: aio example applications
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- Re: [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: To what repository do you commit your patches to?
- From: Marco Zamponi <mzamponi@xxxxxxxxx>
- Re: [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/2 v2] usbnet: fix bad header length bug
- From: Oliver Neukum <oneukum@xxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Kasberger Andreas <andreaskasberger@xxxxxxxxxxx>
- Re: Re: [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800Device Driver Support
- From: "liujunliang_ljl" <liujunliang_ljl@xxxxxxx>
- Re: [RFC] usb: option: blacklist ZTE MF667 net interface
- From: Raymond W <raymond.wanyoike@xxxxxxxxx>
- Re: [PATCH v3 1/1] USB: EHCI: wait more than 3ms until the device enters full-speed idle
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v4 13/14] usb: force warm reset to break resume livelock
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb/host/Kconfig: ohci- / ehci-platform make sure PHY_GENERIC is available
- From: "Yann E. MORIN" <yann.morin.1998@xxxxxxx>
- Re: [PATCH v4 13/14] usb: force warm reset to break resume livelock
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 12/14] usb: guarantee child device resume on port poweron
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Nishanth Menon <nm@xxxxxx>
- Re: [BUG] FL1009: xHCI host not responding to stop endpoint command.
- From: arno@xxxxxxxxxxxx (Arnaud Ebalard)
- Re: USB storage vanilla kernel 3.13 hang on DELL PRECISION M6400
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: USB storage vanilla kernel 3.13 hang on DELL PRECISION M6400
- From: Stefani Seibold <stefani.seibold@xxxxxxxxxxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Roger Quadros <rogerq@xxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Nishanth Menon <nm@xxxxxx>
- Re: USB storage vanilla kernel 3.13 hang on DELL PRECISION M6400
- From: Stefani Seibold <stefani.seibold@xxxxxxxxxxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 1/2] usb/misc/usbled: Add Riso Kagaku Webmail Notifier
- From: Christian Vogel <vogelchr@xxxxxxxx>
- [PATCH 2/2] usbhid/quirks: Ignore Riso Kagaku Webmail Notifier
- From: Christian Vogel <vogelchr@xxxxxxxx>
- Riso Kagaku Webmail Notifier: add to usbled, ignore in usbhid
- From: Christian Vogel <vogelchr@xxxxxxxx>
- Re: USB storage vanilla kernel 3.13 hang on DELL PRECISION M6400
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/1] USB: EHCI: wait more than 3ms until the device enters full-speed idle
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB storage vanilla kernel 3.13 hang on DELL PRECISION M6400
- From: Stefani Seibold <stefani.seibold@xxxxxxxxxxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Nishanth Menon <nm@xxxxxx>
- Re: To what repository do you commit your patches to?
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: regression(ti platforms): next-20140210 (ehci?)
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/2] usb/host/Kconfig: ohci- / ehci-platform make sure PHY_GENERIC is available
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- regression(ti platforms): next-20140210 (ehci?)
- From: Nishanth Menon <nm@xxxxxx>
- Re: USB storage vanilla kernel 3.13 hang on DELL PRECISION M6400
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: some questions about bandwidth calculation
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2 v2] usbnet: fix bad header length bug
- From: Emil Goode <emilgoode@xxxxxxxxx>
- RE: USB/IP
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: To what repository do you commit your patches to?
- From: Marco Zamponi <mzamponi@xxxxxxxxx>
- Re: USB/IP
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Kasberger Andreas <andreaskasberger@xxxxxxxxxxx>
- Re: [PATCH v4] tools: usb: aio example applications
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- [PATCH 2/2] usb/host/Kconfig: Ensure all deps are met when selecting USB_HCD_?HCI_PLATFORM
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 1/2] usb/host/Kconfig: ohci- / ehci-platform make sure PHY_GENERIC is available
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 0/2] usb/host/Kconfig: Fix issues caused by recent ?hci-platform changes
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 2/2] storage: accept some UAS devices if streams are unavailable
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Oliver Neukum <oneukum@xxxxxxx>
- [PATCH 2/2] storage: accept some UAS devices if streams are unavailable
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [RFC 1/2] usb: gadget: zero: Add support for interrupt EP
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- Re: [RFC 1/2] usb: gadget: zero: Add support for interrupt EP
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- USB storage vanilla kernel 3.13 hang on DELL PRECISION M6400
- From: Stefani Seibold <stefani.seibold@xxxxxxxxxxxxxx>
- [RFC 2/2] usbtest: Add interrupt EP testcases
- From: Amit Virdi <amit.virdi@xxxxxx>
- [RFC 1/2] usb: gadget: zero: Add support for interrupt EP
- From: Amit Virdi <amit.virdi@xxxxxx>
- [RFC 0/2] usb: g_zero: Add support for interrupt EP
- From: Amit Virdi <amit.virdi@xxxxxx>
- Re: [PATCH 1/2 v2] usbnet: fix bad header length bug
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: some questions about bandwidth calculation
- From: vichy <vichy.kuo@xxxxxxxxx>
- RE: [PATCH 1/2 v2] usbnet: fix bad header length bug
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH 1/2 v2] usbnet: fix bad header length bug
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2 v2] usbnet: fix bad header length bug
- From: Emil Goode <emilgoode@xxxxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Kasberger Andreas <andreaskasberger@xxxxxxxxxxx>
- [PATCH v4] tools: usb: aio example applications
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- Re: [Bug 68161] Unstable work of xhci with USB3.0 card reader and UDMA7 CompactFlash card.
- From: tatxarata <tatxarata@xxxxxxxxx>
- RE: USB/IP
- From: David Laight <David.Laight@xxxxxxxxxx>
- [PATCH v5 2/5] usb: gadget: functionfs: replace FFS_SETUP_STATUS with an inline function
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v5 5/5] usb: gadget: f_fs: add aio support
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v5 1/5] usb: gadget: functionfs: fix typo in the enum variable
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v5 4/5] usb: gadget: f_fs: add poll for endpoint 0
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v5 3/5] usb: gadget: f_fs: fix setup request handling
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- [PATCH v5 0/5] usb: gadget: f_fs: add asynchronous I/O support
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- Re: [PATCH v3] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH 1/2 v2] usbnet: fix bad header length bug
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
- From: liujunliang_ljl@xxxxxxx
- Re: Re: [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800Device Driver Support
- From: "liujunliang_ljl" <liujunliang_ljl@xxxxxxx>
- Re: [PATCH v2 0/9] Add USB OTG HNP and SRP support on Chipidea usb driver
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
- From: liujunliang_ljl@xxxxxxx
- Re: [PATCH v2 9/9] usb: chipidea: debug: add debug file for OTG variables show and registers dump.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: Slightly off-topic, USB code in Linux working, but fails in U-Boot
- From: Ben Collins <benmcollins13@xxxxxxxxx>
- Re: [PATCH v2 8/9] usb: chipidea: add sys inputs for OTG fsm input.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 7/9] usb: chipidea: OTG HNP and SRP fsm implementation.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 6/9] usb: chipidea: OTG fsm timers initialization.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
- From: Joe Perches <joe@xxxxxxxxxxx>
- RE: Slightly off-topic, USB code in Linux working, but fails in U-Boot
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [BUGREPORT] Linux USB 3.0
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- [PATCH 1/2 v2] usbnet: fix bad header length bug
- From: Emil Goode <emilgoode@xxxxxxxxx>
- [PATCH 2/2] net: asix: add missing flag to struct driver_info
- From: Emil Goode <emilgoode@xxxxxxxxx>
- Re: USB/IP
- From: Peter Stuge <peter@xxxxxxxx>
- Re: [PATCH 01/28] Remove CPU_MMP3
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [PATCH] usb/misc/usbled: Add Riso Kagaku Corp. Webmail Notifier
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb/misc/usbled: Add Riso Kagaku Corp. Webmail Notifier
- From: Christian Vogel <vogelchr@xxxxxxxx>
- Re: [PATCH 23/28] Remove MACH_OMAP_H4_OTG
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] usb/misc/usbled: Add Riso Kagaku Corp. Webmail Notifier
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: USB/IP
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 01/28] Remove CPU_MMP3
- From: Richard Weinberger <richard@xxxxxx>
- [PATCH 23/28] Remove MACH_OMAP_H4_OTG
- From: Richard Weinberger <richard@xxxxxx>
- Slightly off-topic, USB code in Linux working, but fails in U-Boot
- From: Ben Collins <benmcollins13@xxxxxxxxx>
- Re: [RFC] usb: option: blacklist ZTE MF667 net interface
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb/misc/usbled: Add Riso Kagaku Corp. Webmail Notifier
- From: Christian Vogel <vogelchr@xxxxxxxx>
- [RFC] usb: option: blacklist ZTE MF667 net interface
- From: Raymond Wanyoike <raymond.wanyoike@xxxxxxxxx>
- USB/IP
- Re: Upgrading just the USB core from 3.7 to tip?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [BUGREPORT] Linux USB 3.0
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- Re: [PATCH v2 5/9] usb: chipidea: add OTG fsm operation functions implemenation.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- RE: [PATCH v2 5/9] usb: chipidea: add OTG fsm operation functions implemenation.
- From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
- Re: [BUGREPORT] Linux USB 3.0
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- Re: [PATCH v2 0/9] Add USB OTG HNP and SRP support on Chipidea usb driver
- From: Li Jun <b47624@xxxxxxxxxxxxx>
- Re: [PATCH v2 3/9] usb: chipidea: host: vbus control change for OTG HNP.
- From: Li Jun <b47624@xxxxxxxxxxxxx>
- Re: [PATCH v2 5/9] usb: chipidea: add OTG fsm operation functions implemenation.
- From: Li Jun <b47624@xxxxxxxxxxxxx>
- Re: [PATCH v2 5/9] usb: chipidea: add OTG fsm operation functions implemenation.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 3/9] usb: chipidea: host: vbus control change for OTG HNP.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/9] Add USB OTG HNP and SRP support on Chipidea usb driver
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/9] usb: chipidea: usb OTG fsm initlization.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/9] usb: phy-fsm: update OTG HNP state transition conditions according to OTG and EH 2.0 spec.
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: Bug#738113: linux-image-3.12-1-amd64: regression in xhci_hcd: USB3 doesn't work anymore
- From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
- Re: Upgrading just the USB core from 3.7 to tip?
- From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
- Re: [PATCH v9 0/4] ohci-platform and ehci-plaform patches rebased on 3.14-rc1
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 1/2] usb: host: xhci-plat: Use module_platform_driver()
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH v9 0/4] ohci-platform and ehci-plaform patches rebased on 3.14-rc1
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 11/14] usb: introduce port status lock
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH v4 03/14] usb: find internal hub tier mismatch via acpi
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH] ARM: sunxi: Add driver for sunxi usb phy
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] ARM: sunxi: Add driver for sunxi usb phy
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: some questions about bandwidth calculation
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v9 1/4] ohci-platform: Add support for devicetree instantiation
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v9 2/4] ehci-platform: Add support for clks and phy passed through devicetree
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v9 4/4] ehci-platform: Add support for controllers with big-endian regs / descriptors
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v9 0/4] ohci-platform and ehci-plaform patches rebased on 3.14-rc1
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v9 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [RFC PATCHv2] usb: move hub init and LED blink work to power efficient workqueue
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCHv2] usb: move hub init and LED blink work to power efficient workqueue
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 03/14] usb: find internal hub tier mismatch via acpi
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] net: asix: fix bad header length bug
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: To what repository do you commit your patches to?
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] net: asix: fix bad header length bug
- From: Emil Goode <emilgoode@xxxxxxxxx>
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: some questions about bandwidth calculation
- From: vichy <vichy.kuo@xxxxxxxxx>
- Re: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [RFC PATCHv2] usb: move hub init and LED blink work to power efficient workqueue
- From: Zoran Markovic <zoran.markovic@xxxxxxxxxx>
- Re: [PATCH v4 07/14] usb: usb3 ports do not support FEAT_C_ENABLE
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH v4 06/14] usb: don't clear FEAT_C_ENABLE on usb_port_runtime_resume failure
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH] net: asix: fix bad header length bug
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH v4 04/14] usb: sysfs link peer ports
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- To what repository do you commit your patches to?
- From: Marco Zamponi <mzamponi@xxxxxxxxx>
- Re: [PATCH v4 03/14] usb: find internal hub tier mismatch via acpi
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
- From: liujunliang_ljl@xxxxxxx
- Re: [PATCH 1/1] usb: gadget: printer: using gadget_is_otg to check otg support at runtime
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [patch] hso: remove some dead code
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH] usb: chipidea: use dev_get_platdata()
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH] usb: chipidea: udc: add maximum-speed = full-speed option
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- Re: [PATCH v9 00/12] Add power management support for mxs phy
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- Re: [PATCH 1/1] usb: gadget: printer: using gadget_is_otg to check otg support at runtime
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- Re: [PATCH 1/1] usb: phy: delete CONFIG_USB_OTG_FSM
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- Re: [PATCH net] r8152: fix the submission of the interrupt transfer
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH] usb: chipidea: use dev_get_platdata()
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v3 1/1] USB: EHCI: wait more than 3ms until the device enters full-speed idle
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH] usb: chipidea: use dev_get_platdata()
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: Fix? ShuttlePROv2 jog dial reports EV_REL events with absolute position event values
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 01/14] usb: assign default peer ports for root hubs
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH] usb: chipidea: use dev_get_platdata()
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: Re: [PATCH] USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800Device Driver Support
- From: "liujunliang_ljl" <liujunliang_ljl@xxxxxxx>
- Re: [PATCH v4 01/14] usb: assign default peer ports for root hubs
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- Re: [PATCH] net: asix: fix bad header length bug
- From: Emil Goode <emilgoode@xxxxxxxxx>
- Re: Upgrading just the USB core from 3.7 to tip?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 09/14] usb: synchronize port poweroff and khubd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 09/14] usb: synchronize port poweroff and khubd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Upgrading just the USB core from 3.7 to tip?
- From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
- Re: [PATCH v4 07/14] usb: usb3 ports do not support FEAT_C_ENABLE
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 06/14] usb: don't clear FEAT_C_ENABLE on usb_port_runtime_resume failure
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 04/14] usb: sysfs link peer ports
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 03/14] usb: find internal hub tier mismatch via acpi
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 01/14] usb: assign default peer ports for root hubs
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 01/14] usb: assign default peer ports for root hubs
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Add for Devices on USB to Serial Device
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] usb: musb: Fix obex in g_nokia.ko causing kernel panic
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: musb: Fix obex in g_nokia.ko causing kernel panic
- From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
- RE: AX88179_178A USB3 ethernet adapter performance issue
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: AX88179_178A USB3 ethernet adapter performance issue
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Fix? ShuttlePROv2 jog dial reports EV_REL events with absolute position event values
- From: TheDiveO <harald.albrecht@xxxxxxx>
- Re: xhci and other woes
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Add for Devices on USB to Serial Device
- From: Johan Hovold <johan@xxxxxxxxxx>
- RE: AX88179_178A USB3 ethernet adapter performance issue
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH 1/1] xhci: include renesas controllers in NEC quirk
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] net: asix: fix bad header length bug
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH] net: asix: fix bad header length bug
- From: Emil Goode <emilgoode@xxxxxxxxx>
- Re: [PATCH v3] phy: Add new Exynos5 USB 3.0 PHY driver
- From: Tomasz Figa <t.figa@xxxxxxxxxxx>
- Re: [PATCH v3] tools: usb: aio example applications
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- RE: [PATCH] net: asix: fix bad header length bug
- From: David Laight <David.Laight@xxxxxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Kasberger Andreas <andreaskasberger@xxxxxxxxxxx>
- [PATCH 1/1] xhci: include renesas controllers in NEC quirk
- From: renevant@xxxxxxxxxxxxxxxx
- Re: [PATCH] net: asix: fix bad header length bug
- From: Igor Gnatenko <i.gnatenko.brain@xxxxxxxxx>
- [PATCH] net: asix: fix bad header length bug
- From: Emil Goode <emilgoode@xxxxxxxxx>
- [patch] hso: remove some dead code
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: xhci and other woes
- From: Hans Petter Selasky <hps@xxxxxxxxxxx>
- RE: xhci and other woes
- From: David Laight <David.Laight@xxxxxxxxxx>
- RE: [PATCH v3] tools: usb: aio example applications
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH v3] tools: usb: aio example applications
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- [PATCH net] r8152: fix the submission of the interrupt transfer
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: [RFC PATCHv1] usb: dwc2: Combine the dwc2 and s3c_hsotg into a single USB DRD driver.
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: xhci and other woes
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Add for Devices on USB to Serial Device
- From: "Gerd W." <01794501433@xxxxxxxxxxx>
- Re: BUG: usb: obex in g_nokia.ko causing kernel panic
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFT 1/2] xhci 1.0: Limit arbitrarily-aligned scatter gather.
- From: Peter Stuge <peter@xxxxxxxx>
- Re: [RFCv2 08/10] xhci: Add a global command queue
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: BUG: usb: obex in g_nokia.ko causing kernel panic
- From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
- Re: xhci and other woes
- From: Peter Stuge <peter@xxxxxxxx>
- Re: [RFT 1/2] xhci 1.0: Limit arbitrarily-aligned scatter gather.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFT 1/2] xhci 1.0: Limit arbitrarily-aligned scatter gather.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFT] xHCI TD fragment revert
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFT 1/2] xhci 1.0: Limit arbitrarily-aligned scatter gather.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] UAS: fallback to storage if no streams are available
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [GIT PULL] xhci: Fix some regressions introduced in 3.14.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH] UAS: fallback to storage if no streams are available
- RE: [PATCH v6 8/8] usb: ehci-exynos: Change to use phy provided by the generic phy framework
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v3] usb: dwc2: handle the Host Port Interrupt when it occurs in device mode
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [PATCH v3] usb: dwc2: handle the Host Port Interrupt when it occurs in device mode
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] xhci: Fix some regressions introduced in 3.14.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] xhci: Fix some regressions introduced in 3.14.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- RE: [RFC PATCHv1] usb: dwc2: Combine the dwc2 and s3c_hsotg into a single USB DRD driver.
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [PATCH v6 8/8] usb: ehci-exynos: Change to use phy provided by the generic phy framework
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [RFCv2 00/10] xhci: re-work command queue management
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- RE: [RFCv2 00/10] xhci: re-work command queue management
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [RFCv2 00/10] xhci: re-work command queue management
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall
- From: Matt Porter <mporter@xxxxxxxxxx>
- RE: [PATCH v6 8/8] usb: ehci-exynos: Change to use phy provided by the generic phy framework
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
- RE: [PATCH v6 8/8] usb: ehci-exynos: Change to use phy provided by the generic phy framework
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
- RE: [PATCH v6 3/8] dts: Add usb2phy to Exynos 4
- From: Kamil Debski <k.debski@xxxxxxxxxxx>
- Re: [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] i2c: bcm-kona: register with subsys_initcall
- From: Matt Porter <mporter@xxxxxxxxxx>
- Re: new USB serial device: Garmin USB ANT stick
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [RFCv2 01/10] xhci: Use command structures when calling xhci_configure_endpoint
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH] usb: musb: correct use of schedule_delayed_work()
- From: Daniel Mack <zonque@xxxxxxxxx>
- RE: xhci and other woes
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- RE: xhci and other woes
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH 1/3] Phytec phyFLEX-i.MX6 : Added USB_HOST Support
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- RE: [RFT 1/2] xhci 1.0: Limit arbitrarily-aligned scatter gather.
- From: David Laight <David.Laight@xxxxxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: David Laight <David.Laight@xxxxxxxxxx>
- RE: xhci and other woes
- From: David Laight <David.Laight@xxxxxxxxxx>
- RE: [RFCv2 00/10] xhci: re-work command queue management
- From: David Laight <David.Laight@xxxxxxxxxx>
- FunctionFS: .iInterface has random value
- From: Marco Zamponi <mzamponi@xxxxxxxxx>
- Re: new USB serial device: Garmin USB ANT stick
- From: Henning Knut Skoglund <hkskoglund@xxxxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Kasberger Andreas <andreaskasberger@xxxxxxxxxxx>
- RE: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Kasberger Andreas <andreaskasberger@xxxxxxxxxxx>
- Re: [PATCH 3/4] Revert "xhci: replace xhci_write_64() with writeq()"
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- Re: [RFCv2 08/10] xhci: Add a global command queue
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- RE: [RFC PATCHv1] usb: dwc2: Combine the dwc2 and s3c_hsotg into a single USB DRD driver.
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- RE: gadgetfs USB2.0 Chapter 9 Tests: Test after "Addressed State" fails
- From: Roshan Jhalani <roshan.jhalani@xxxxxxxxxxxx>
- Re: [PATCH net,stable] net: qmi_wwan: add Netgear Aircard 340U
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [RFCv2 00/10] xhci: re-work command queue management
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [RFCv2 01/10] xhci: Use command structures when calling xhci_configure_endpoint
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH] usb: chipidea: use dev_get_platdata()
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- RE: [RFC PATCHv1] usb: dwc2: Combine the dwc2 and s3c_hsotg into a single USB DRD driver.
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [RFT] xHCI TD fragment revert
- From: Mark Lord <mlord@xxxxxxxxx>
- [PATCH v3] usb: dwc2: handle the Host Port Interrupt when it occurs in device mode
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [RFT] xHCI TD fragment revert
- From: Mark Lord <mlord@xxxxxxxxx>
- Re: gadgetfs USB2.0 Chapter 9 Tests: Test after "Addressed State" fails
- From: Jack Pham <jackp@xxxxxxxxxxxxxx>
- RE: [PATCHv2] usb: dwc2: Handle the Host Port Interrupt when it occurs in device mode
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- [RFC PATCHv1] usb: dwc2: Combine the dwc2 and s3c_hsotg into a single USB DRD driver.
- From: <dinguyen@xxxxxxxxxx>
- [RFC PATCHv1] usb: dwc2: Combine dwc2/s3c-hsotg into a single DRD
- From: <dinguyen@xxxxxxxxxx>
- RE: [PATCHv2] usb: dwc2: Handle the Host Port Interrupt when it occurs in device mode
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [GIT PULL] xhci: Fix some regressions introduced in 3.14.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] xhci: Fix some regressions introduced in 3.14.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: xhci and other woes
- From: Mark Lord <mlord@xxxxxxxxx>
- [PATCH 4/4] Revert "xhci: replace xhci_read_64() with readq()"
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 2/4] Revert "usbcore: set lpm_capable field for LPM capable root hubs"
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 3/4] Revert "xhci: replace xhci_write_64() with writeq()"
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 1/4] xhci: Fix resume issues on Renesas chips in Samsung laptops
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [GIT PULL] xhci: Fix some regressions introduced in 3.14.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH] usb: dwc2: bail out early when booting with "nousb"
- From: Andre Heider <a.heider@xxxxxxxxx>
- Re: [PATCH] usb: dwc2: bail out early when booting with "nousb"
- From: Andre Heider <a.heider@xxxxxxxxx>
- [RFT 1/2] xhci 1.0: Limit arbitrarily-aligned scatter gather.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [RFT 2/2] Revert "usb: xhci: Link TRB must not occur within a USB payload burst"
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [RFT] xHCI TD fragment revert
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc2: bail out early when booting with "nousb"
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- [PATCH] usb: dwc2: fix role switch breakage
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- [PATCH] usb: dwc2: fix memory corruption in dwc2 driver
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: xhci and other woes
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH] usb: dwc2: bail out early when booting with "nousb"
- From: Andre Heider <a.heider@xxxxxxxxx>
- Re: PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Peter Stuge <peter@xxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Andre Heider <a.heider@xxxxxxxxx>
- Re: usb3 stopped working 3.13.0-rc3-g8d276377 → 3.13.0-g9b0cd304
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- ax88179_178a problems on ASMedia xhci controller
- From: David Laight <David.Laight@xxxxxxxxxx>
- [PATCHv2] usb: dwc2: Handle the Host Port Interrupt when it occurs in device mode
- From: <dinguyen@xxxxxxxxxx>
- RE: dwc2: commit beb7e592bc is causing a disconnected device to not get detected again
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- Re: [PATCH 0/2] usb: musb: host: fixes for 3.14-rc
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 0/2] usb: musb: host: fixes for 3.14-rc
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 8/8] usb: ehci-exynos: Change to use phy provided by the generic phy framework
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- [PATCH 0/2] usb: musb: host: fixes for 3.14-rc
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 2/2] usb: musb: core: Fix remote-wakeup resume
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 1/2] usb: musb: host: Fix SuperSpeed hub enumeration
- From: Roger Quadros <rogerq@xxxxxx>
- PROBLEM: XHCI Host Controller on Intel Panther Point with CDC/ACM dead after massive NAK
- From: Kasberger Andreas <andreaskasberger@xxxxxxxxxxx>
- Re: [PATCH v3] tools: usb: aio example applications
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- [PATCH net,stable] net: qmi_wwan: add Netgear Aircard 340U
- From: Bjørn Mork <bjorn@xxxxxxx>
- [PATCH] usb: qcserial: add Netgear Aircard 340U
- From: Bjørn Mork <bjorn@xxxxxxx>
- [PATCH] xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
- From: Denis Turischev <denis.turischev@xxxxxxxxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Andre Heider <a.heider@xxxxxxxxx>
- Re: xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- RE: [BUGREPORT] Linux USB 3.0
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH v3] tools: usb: aio example applications
- From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
- Re: xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- [PATCH] usb: gadget: s3c-hsotg: use %pad for dma_addr_t
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- [PATCH 3/3] Phytec phyFLEX-i.MX6 : Added SATA Support
- From: Ashutosh singh <ashutosh.s@xxxxxxxxx>
- [PATCH 2/3] Phytec phyFLEX-i.MX6 : Added GPMI-NAND Support
- From: Ashutosh singh <ashutosh.s@xxxxxxxxx>
- [PATCH 1/3] Phytec phyFLEX-i.MX6 : Added USB_HOST Support
- From: Ashutosh singh <ashutosh.s@xxxxxxxxx>
- Re: [PATCH v2 2/2] usb: host: xhci-plat: Fix build warning when !CONFIG_PM
- From: Olof Johansson <olof@xxxxxxxxx>
- [PATCH v2] Phytec phyFLEX-i.MX6 : Added USB_OTG Support
- From: Ashutosh singh <ashutosh.s@xxxxxxxxx>
- RE: dwc2: commit beb7e592bc is causing a disconnected device to not get detected again
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- RE: dwc2: commit beb7e592bc is causing a disconnected device to not get detected again
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- usb: dwc2: commit beb7e592bc is causing a disconnected device to not get detected again
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- RE: dwc2: commit beb7e592bc is causing a disconnected device to not get detected again
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- RE: dwc2: commit beb7e592bc is causing a disconnected device to not get detected again
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [BUGREPORT] Linux USB 3.0
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- usb3 stopped working 3.13.0-rc3-g8d276377 → 3.13.0-g9b0cd304
- From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- RE: [PATCH] usb: dwc2: Handle the Host Port Interrupt when it occurs in device mode
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Josh Bendavid <joshbendavid@xxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] usb: dwc2: Handle the Host Port Interrupt when it occurs in device mode
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Josh Bendavid <joshbendavid@xxxxxxxxx>
- RE: [PATCH v4] Move DWC2 driver out of staging
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Josh Bendavid <joshbendavid@xxxxxxxxx>
- Re: [PATCH v4 00/14] port power control fixes
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 0/9] xhci: Add support for URB_ZERO_PACKET
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: phy: Quiet unable to find transceiver message
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [RFT] usb: Disable Link PM if setting device-initiated timeout fails.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 00/14] port power control fixes
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [DRIVER][WIP] Playstation controllers (DualShock 3/4, Navigation/Motion Controller, ...)
- From: jb b <jblbeurope@xxxxxxxxx>
- RE: [PATCH v4] Move DWC2 driver out of staging
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- [PATCH] usb: dwc2: Handle the Host Port Interrupt when it occurs in device mode
- From: <dinguyen@xxxxxxxxxx>
- usb interrupt storms from the ax88179 hardware
- From: David Laight <David.Laight@xxxxxxxxxx>
- RE: xhci and other woes
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH] usb: phy: Quiet unable to find transceiver message
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: phy: Quiet unable to find transceiver message
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- [PATCH] usb: gadget: s3c-hsotg: fix build on x86 and other architectures
- From: Matt Porter <mporter@xxxxxxxxxx>
- RE: xhci and other woes
- From: David Laight <David.Laight@xxxxxxxxxx>
- RE: xhci and other woes
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- xhci and other woes
- From: renevant@xxxxxxxxxxxxxxxx
- Remove dependency on BROKEN from drives/usb/musb/da8xx.c glue
- From: Christian Riesch <christian.riesch@xxxxxxxxxx>
- RE: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: David Laight <David.Laight@xxxxxxxxxx>
- [PATCH Resend 2/2] usb: gadget: s3c-hsudc: Remove unused label
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- [PATCH Resend 1/2] usb: gadget: s3c2410_udc: Fix build error
- From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
- Re: [DRIVER][WIP] Playstation controllers (DualShock 3/4, Navigation/Motion Controller, ...)
- From: simon@xxxxxxxxxxxxx
- Re: USB Device stops working after 200001 interrupts
- From: Josh Bendavid <joshbendavid@xxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB Device stops working after 200001 interrupts
- From: Josh Bendavid <joshbendavid@xxxxxxxxx>
- Re: [DRIVER][WIP] Playstation controllers (DualShock 3/4, Navigation/Motion Controller, ...)
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [DRIVER][WIP] Playstation controllers (DualShock 3/4, Navigation/Motion Controller, ...)
- From: jb b <jblbeurope@xxxxxxxxx>
- Re: [RFC PATCHv2] usb: move hub init and LED blink work to power efficient workqueue
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4] USB: ftdi_sio: add Tagsys RFID Reader IDs
- From: Ulrich Hahn <uhahn@xxxxxxxx>
- Re: ..another device for the ftdi_sio driver, 3rd infusion
- From: Johan Hovold <johan@xxxxxxxxxx>
- ..another device for the ftdi_sio driver, 3rd infusion
- From: Ulrich Hahn <uhahn@xxxxxxxx>
- Re: [DRIVER][WIP] Playstation controllers (DualShock 3/4, Navigation/Motion Controller, ...)
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 00/14] port power control fixes
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: ..another device for the ftdi_sio driver, 2nd infusion
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- ..another device for the ftdi_sio driver, 2nd infusion
- From: Ulrich Hahn <uhahn@xxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [RFC PATCHv2] usb: move hub init and LED blink work to power efficient workqueue
- From: Zoran Markovic <zoran.markovic@xxxxxxxxxx>
- Re: [PATCH v3 0/9] xhci: Add support for URB_ZERO_PACKET
- From: renevant@xxxxxxxxxxxxxxxx
- Re: [PATCH v4 00/14] port power control fixes
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH v4 00/14] port power control fixes
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: Mark Lord <mlord@xxxxxxxxx>
- Re: [PATCH v4 00/14] port power control fixes
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH v4 00/14] port power control fixes
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [DRIVER][WIP] Playstation controllers (DualShock 3/4, Navigation/Motion Controller, ...)
- From: jb b <jblbeurope@xxxxxxxxx>
- Re: SCSI Sense Information in usb-storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: SCSI Sense Information in usb-storage
- From: Steph Nguyen <stephkernel@xxxxxxxx>
- Re: SCSI Sense Information in usb-storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: SCSI Sense Information in usb-storage
- From: Steph Nguyen <stephkernel@xxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- ..another device for the ftdi_sio driver
- From: Ulrich Hahn <uhahn@xxxxxxxx>
- Re: SCSI Sense Information in usb-storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- SCSI Sense Information in usb-storage
- From: Steph Nguyen <stephkernel@xxxxxxxx>
- Re: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: Mark Lord <mlord@xxxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Andre Heider <a.heider@xxxxxxxxx>
- Re: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [RFC PATCH] usb: move hub init and LED blink work to power efficient workqueue
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb audio breaks ohci-pci
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4 14/14] usb: documentation for usb port power off mechanisms
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 13/14] usb: force warm reset to break resume livelock
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 12/14] usb: guarantee child device resume on port poweron
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 11/14] usb: introduce port status lock
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 10/14] xhci: cancel in-flight resume requests when the port is powered off
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 09/14] usb: synchronize port poweroff and khubd
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 08/14] usb: refactor port handling in hub_events()
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 06/14] usb: don't clear FEAT_C_ENABLE on usb_port_runtime_resume failure
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 07/14] usb: usb3 ports do not support FEAT_C_ENABLE
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 05/14] usb: defer suspension of superspeed port while peer is powered
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 04/14] usb: sysfs link peer ports
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 03/14] usb: find internal hub tier mismatch via acpi
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 00/14] port power control fixes
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 02/14] usb: assign usb3 external hub port peers
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH v4 01/14] usb: assign default peer ports for root hubs
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [RFC PATCH] usb: move hub init and LED blink work to power efficient workqueue
- From: Zoran Markovic <zoran.markovic@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [OPW] USB subsystem questions
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ASMedia xhci controller errors
- From: walt <w41ter@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 30 sec boot delay and logitech mouse disconnection
- From: glphvgacs <darwinskernel@xxxxxxxxx>
- Re: [OPW] USB subsystem questions
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxx>
- RE: [PATCH v4] Move DWC2 driver out of staging
- From: Paul Zimmerman <paulz@xxxxxxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: ASMedia xhci controller errors
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Andre Heider <a.heider@xxxxxxxxx>
- Re: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Help testing for USB ethernet/xHCI regression
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Andre Heider <a.heider@xxxxxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v4] Move DWC2 driver out of staging
- From: Andre Heider <a.heider@xxxxxxxxx>
- RE: [RFT] usb: Disable Link PM if setting device-initiated timeout fails.
- From: David Laight <David.Laight@xxxxxxxxxx>
- RE: [RFT] usb: Disable Link PM if setting device-initiated timeout fails.
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Felipe Balbi <balbi@xxxxxx>
- ASMedia xhci controller errors
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: dwc3: keystone: switch to use runtime pm
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH v2 1/2] usb: host: xhci-plat: Use module_platform_driver()
- From: Fabio Estevam <festevam@xxxxxxxxx>
- RE: [PATCH RFC 1/1] usb: Tell xhci when usb data might be misaligned
- From: David Laight <David.Laight@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]