[RFC PATCHv2] usb: move hub init and LED blink work to power efficient workqueue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Shaibal Dutta <shaibal.dutta@xxxxxxxxxxxx>

Allow the scheduler to select the best CPU to handle hub initalization
and LED blinking work. This extends idle residency times on idle CPUs
and conserves power.

This functionality is enabled when CONFIG_WQ_POWER_EFFICIENT is selected.

Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
Cc: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
Cc: Julius Werner <jwerner@xxxxxxxxxxxx>
Cc: Krzysztof Mazur <krzysiek@xxxxxxxxxxxx>
Cc: Matthias Beyer <mail@xxxxxxxxxxxxxxxx>
Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
Cc: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Cc: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
Signed-off-by: Shaibal Dutta <shaibal.dutta@xxxxxxxxxxxx>
[zoran.markovic@xxxxxxxxxx: Rebased to latest kernel. Added commit message.
Changed reference from system to power efficient workqueue for LEDs in
check_highspeed() and hub_port_connect_change().]
Signed-off-by: Zoran Markovic <zoran.markovic@xxxxxxxxxx>
---
 drivers/usb/core/hub.c |   19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index babba88..e11a7e9 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -504,7 +504,8 @@ static void led_work (struct work_struct *work)
 		changed++;
 	}
 	if (changed)
-		schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
+		queue_delayed_work(system_power_efficient_wq,
+				&hub->leds, LED_CYCLE_PERIOD);
 }
 
 /* use a short timeout for hub/port status fetches */
@@ -1046,7 +1047,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 		if (type == HUB_INIT) {
 			delay = hub_power_on(hub, false);
 			PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func2);
-			schedule_delayed_work(&hub->init_work,
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->init_work,
 					msecs_to_jiffies(delay));
 
 			/* Suppress autosuspend until init is done */
@@ -1200,7 +1202,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 		/* Don't do a long sleep inside a workqueue routine */
 		if (type == HUB_INIT2) {
 			PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func3);
-			schedule_delayed_work(&hub->init_work,
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->init_work,
 					msecs_to_jiffies(delay));
 			return;		/* Continues at init3: below */
 		} else {
@@ -1214,7 +1217,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	if (status < 0)
 		dev_err(hub->intfdev, "activate --> %d\n", status);
 	if (hub->has_indicators && blinkenlights)
-		schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
+		queue_delayed_work(system_power_efficient_wq,
+				&hub->leds, LED_CYCLE_PERIOD);
 
 	/* Scan all ports that need attention */
 	kick_khubd(hub);
@@ -4316,7 +4320,8 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
 		/* hub LEDs are probably harder to miss than syslog */
 		if (hub->has_indicators) {
 			hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
-			schedule_delayed_work (&hub->leds, 0);
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->leds, 0);
 		}
 	}
 	kfree(qual);
@@ -4545,7 +4550,9 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 				if (hub->has_indicators) {
 					hub->indicator[port1-1] =
 						INDICATOR_AMBER_BLINK;
-					schedule_delayed_work (&hub->leds, 0);
+					queue_delayed_work(
+						system_power_efficient_wq,
+						&hub->leds, 0);
 				}
 				status = -ENOTCONN;	/* Don't retry */
 				goto loop_disable;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux