On Tue, Jan 28, 2014 at 04:28:44PM +0100, Michael Grzeschik wrote:
> This patch makes it possible to set the chipidea udc into full-speed only mode.
> It is set by the oftree property "maximum-speed = full-speed".
>
> Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt | 2 ++
> drivers/usb/chipidea/bits.h | 2 ++
> drivers/usb/chipidea/core.c | 11 +++++++++++
> include/linux/usb/chipidea.h | 1 +
> 4 files changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> index b4b5b79..a6a32cb 100644
> --- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> @@ -18,6 +18,7 @@ Optional properties:
> - vbus-supply: regulator for vbus
> - disable-over-current: disable over current detect
> - external-vbus-divider: enables off-chip resistor divider for Vbus
> +- maximum-speed: limit the maximum connection speed to "full-speed".
>
> Examples:
> usb@02184000 { /* USB OTG */
> @@ -28,4 +29,5 @@ usb@02184000 { /* USB OTG */
> fsl,usbmisc = <&usbmisc 0>;
> disable-over-current;
> external-vbus-divider;
> + maximum-speed = "full-speed";
> };
> diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
> index a857131..83d06c1 100644
> --- a/drivers/usb/chipidea/bits.h
> +++ b/drivers/usb/chipidea/bits.h
> @@ -50,12 +50,14 @@
> #define PORTSC_PTC (0x0FUL << 16)
> #define PORTSC_PHCD(d) ((d) ? BIT(22) : BIT(23))
> /* PTS and PTW for non lpm version only */
> +#define PORTSC_PFSC BIT(24)
> #define PORTSC_PTS(d) \
> (u32)((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
> #define PORTSC_PTW BIT(28)
> #define PORTSC_STS BIT(29)
>
> /* DEVLC */
> +#define DEVLC_PFSC BIT(23)
> #define DEVLC_PSPD (0x03UL << 25)
> #define DEVLC_PSPD_HS (0x02UL << 25)
> #define DEVLC_PTW BIT(27)
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 33f22bc..e813bf1 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -64,6 +64,7 @@
> #include <linux/usb/otg.h>
> #include <linux/usb/chipidea.h>
> #include <linux/usb/of.h>
> +#include <linux/of.h>
> #include <linux/phy.h>
> #include <linux/regulator/consumer.h>
>
> @@ -298,6 +299,13 @@ int hw_device_reset(struct ci_hdrc *ci, u32 mode)
> if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
> hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
>
> + if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
> + if (ci->hw_bank.lpm)
> + hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
> + else
> + hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
> + }
> +
> /* USBMODE should be configured step by step */
> hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
> hw_write(ci, OP_USBMODE, USBMODE_CM, mode);
> @@ -412,6 +420,9 @@ static int ci_get_platdata(struct device *dev,
> }
> }
>
> + if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
> + platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
> +
> return 0;
> }
>
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index 708bd11..bbe779f 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -25,6 +25,7 @@ struct ci_hdrc_platform_data {
> */
> #define CI_HDRC_DUAL_ROLE_NOT_OTG BIT(4)
> #define CI_HDRC_IMX28_WRITE_FIX BIT(5)
> +#define CI_HDRC_FORCE_FULLSPEED BIT(6)
> enum usb_dr_mode dr_mode;
> #define CI_HDRC_CONTROLLER_RESET_EVENT 0
> #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
> --
> 1.8.5.3
>
>
Tested and applied it, thanks.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
