Linux Device Tree

• Thread Index

• Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• Re: [PATCH 04/13] media: qcom: camss: csiphy: Add an init callback to CSI PHY devices
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• Re: [PATCH v5 3/4] firmware: psci: Read and use vendor reset types
  • From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
• Re: [PATCH v2 2/3] coresight: Add source filtering for multi-port output
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: camss: Add CAMSS block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: ad7173: add support for ad4113
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: adc: ad7173: add support for ad4113
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH 0/2] Add support for AD4113
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v2 1/6] arm64: dts: fsl-ls1028a: remove undocumented 'little-endian' for dspi node
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 3/6] arm64: dts: imx8mm-venice-gw7901: add #address(size)-cells for gsc@20
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v2] arm64: dts: imx8mp-verdin: add HDMI audio support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v3 03/17] wifi: cc33xx: Add sdio.c, io.c, io.h
  • From: "Nemanov, Michael" <michael.nemanov@xxxxxx>
• [PATCH v2 6/6] arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 5/6] arm64: dts: imx8mp-venice-gw74xx-imx219: remove compatible in overlay file
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 4/6] arm64: dts: imx8mp-data-modul-edm-sbc: remove #clock-cells for sai3
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 2/6] arm64: dts: fsl-ls208xa: move reboot node under syscon
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 0/6] arm64: dts: freescale: 2nrd clean up dtb warning under freescale
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v1 1/4] dt-bindings: net: fec: add pps channel property
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: camss: Add CAMSS block definition
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1 4/4] arm64: dts: imx8-ss-conn: add PPS channel to the FEC nodes
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• [PATCH v1 0/4] net: fec: add PPS channel configuration
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: ti: k3-j7200*: Add bootph-* properties
  • From: "Limaye, Aniket" <a-limaye@xxxxxx>
• [PATCH 1/3] usb: hub: add infrastructure to pass onboard_dev port features
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: usb: microchip,usb2514: add support for port vbus-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/3] usb: misc: onboard_dev: add ext-vbus-supply handling
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 0/3] External VBUS port power handling for onboard USB devices
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: layerscape: move dwc3 usb under glue layer node
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2] of/irq: Consider device address size in interrupt map walk
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 0/5] serial: 8250: omap: Add am62 wakeup support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: serial: 8250_omap: Add wakeup-source property
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: camss: Add CAMSS block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 5/5] serial: 8250: omap: Parse DT wakeup-source proerty
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v2 4/5] serial: 8250: omap: Set wakeup capable, do not enable
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v2 3/5] serial: 8250: omap: Cleanup on error in request_irq
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v2 2/5] serial: 8250: omap: Remove unused wakeups_enabled
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH] of/irq: Consider device address size in interrupt map walk
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/13] media: qcom: camss: csiphy: Add an init callback to CSI PHY devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2] arm64: dts: imx8mp-verdin: add HDMI audio support
  • From: João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
• [PATCH v2] of/irq: Consider device address size in interrupt map walk
  • From: Stefan Wiehler <stefan.wiehler@xxxxxxxxx>
• [PATCH] arm64: dts: qcom: sa8775p: add CPU idle states
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 3/8] mfd: syscon: Add reference counting and device managed support
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: ti: k3-j784s4-evm: Use 4 lanes for PCIe0 on EVM
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 0/9] Introduce J742S2 SoC and EVM
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 4/9] arm64: dts: ti: Split k3-j784s4-j742s2-main-common.dtsi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 4/9] arm64: dts: ti: Split k3-j784s4-j742s2-main-common.dtsi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 0/7] media: mediatek: vcodec: fix v4l2_ctrl_request_complete fail
  • From: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
• Re: [PATCH 04/13] media: qcom: camss: csiphy: Add an init callback to CSI PHY devices
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• Re: [PATCH v3 6/9] arm64: dts: ti: Split k3-j784s4-j742s2-evm-common.dtsi
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: camss: Add CAMSS block definition
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: imx8mp-verdin: add HDMI audio support
  • From: João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: camss: Add CAMSS block definition
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: x1e80100-yoga: Update panel bindings
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: camss: Add CAMSS block definition
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8550: camss: Add CAMSS block definition
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• [PATCH v3] arm64: dts: ti: k3-am642-tqma64xxl-mbax4xxl: add PRU Ethernet support
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: ti: k3-am642-tqma64xxl-mbax4xxl: add PRU Ethernet support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 9/9] arm64: dts: ti: Add support for J742S2 EVM board
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] of/irq: Consider device address size in interrupt map walk
  • From: Stefan Wiehler <stefan.wiehler@xxxxxxxxx>
• Re: [PATCH v2] arm64: dts: ti: k3-am642-tqma64xxl-mbax4xxl: add PRU Ethernet support
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 9/9] arm64: dts: ti: Add support for J742S2 EVM board
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/5] arm64: dts: ti: k3-am62p: Remove 'reserved' status
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v1] arm64: dts: imx8mp-verdin: add HDMI audio support
  • From: João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
• Re: [PATCH v1 08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• Re: [PATCH v8 4/5] wifi: brcmfmac: Add optional lpo clock enable support
  • From: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH v3 5/5] drm/rockchip: Add basic RK3588 HDMI output support
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• [PATCH v3 4/5] drm/rockchip: Explicitly include bits header
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• [PATCH v3 3/5] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• [PATCH v3 2/5] drm/bridge: synopsys: Add DW HDMI QP TX Controller support library
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• [PATCH v3 0/5] Add initial support for the Rockchip RK3588 HDMI TX Controller
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• [PATCH v3 1/5] dt-bindings: display: bridge: Add schema for Synopsys DW HDMI QP TX IP
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sa8775p-ride: Add QCS9100 compatible
  • From: Tingwei Zhang <quic_tingweiz@xxxxxxxxxxx>
• Re: [PATCH v7 0/4] ADP5585 GPIO expander, PWM and keypad controller support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval carrier
  • From: Frieder Schrempf <frieder@xxxxxxx>
• [PATCH v2 2/3] arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier board
  • From: Frieder Schrempf <frieder@xxxxxxx>
• [PATCH v2 1/3] dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
  • From: Frieder Schrempf <frieder@xxxxxxx>
• [PATCH v2 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards
  • From: Frieder Schrempf <frieder@xxxxxxx>
• Re: [PATCH 3/3] arm64: dts: Add phyBOARD-Pollux dts for rpmsg
  • From: Yashwanth Varakala <Y.Varakala@xxxxxxxxx>
• Re: [PATCH] dt-bindings: regulator: mediatek,mt6397-regulator: convert to YAML
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• [PATCH] arm64: dts: ti: k3-am68-sk-base-board: Add clklb pin mux for mmc1
  • From: Bhavya Kapoor <b-kapoor@xxxxxx>
• Re: [PATCH v4 1/8] misc: Add support for LAN966x PCI device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v3 1/2] drm/panel: jd9365da: Move "exit sleep mode" and "set display on" cmds
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] drm/panel: jd9365da: Modify the init code of Melfas
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/2] Modify the method of sending "exit sleep
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 1/3] nvmem: u-boot-env: error if NVMEM device is too small
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 6/8] reset: mchp: sparx5: Release syscon when not use anymore
  • From: Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: nvmem: imx-ocotp: support i.MX95
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: ti: k3-j721e*: Add bootph-* properties
  • From: Manorit Chawdhry <m-chawdhry@xxxxxx>
• Re: [RESEND PATCH] dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: timer: nxp,lpc3220-timer: Convert to dtschema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 9/9] arm64: dts: ti: Add support for J742S2 EVM board
  • From: Beleswar Prasad Padhi <b-padhi@xxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sa8775p-ride: Add QCS9100 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: mfd: add binding for qnap,ts433-mcu devices
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v1 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S8
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Add minimal Exynos8895 SoC and SM-G950F support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: ti: k3-j721e*: Add bootph-* properties
  • From: Neha Malcom Francis <n-francis@xxxxxx>
• Re: [PATCH v1 08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2] dt-bindings: regulator: mediatek,mt6397-regulator: convert to YAML
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sa8775p-ride: Add QCS9100 compatible
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: arm: qcom: Document QCS9100 compatible
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v4 5/8] reset: mchp: sparx5: Allow building as a module
  • From: Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>
• Re: [PATCH v1 07/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: ti: k3-j721e*: Add bootph-* properties
  • From: "Kumar, Udit" <u-kumar1@xxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: ti: k3-j7200*: Add bootph-* properties
  • From: "Kumar, Udit" <u-kumar1@xxxxxx>
• Re: [PATCH v1 00/10] Add minimal Exynos8895 SoC and SM-G950F support
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• Re: [PATCH v1 03/10] soc: samsung: exynos-chipid: add exynos8895 SoC support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 00/10] Add minimal Exynos8895 SoC and SM-G950F support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S8
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 09/10] dt-bindings: arm: samsung: Document dreamlte board binding
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 07/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 06/10] dt-bindings: pinctrl: samsung: add exynos8895-wakeup-eint compatible
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 05/10] pinctrl: samsung: Add exynos8895 SoC pinctrl configuration
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 04/10] dt-bindings: pinctrl: samsung: Add compatible for Exynos8895 SoC
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 03/10] soc: samsung: exynos-chipid: add exynos8895 SoC support
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 02/10] dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M2
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• [PATCH v2 00/10] Add minimal Exynos8895 SoC and SM-G950F support
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• Re: [PATCH v1 00/10] Add minimal Exynos8895 SoC and SM-G950F support
  • From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: serial: Add Loongson UART controller
  • From: 郑豪威 <zhenghaowei@xxxxxxxxxxx>
• [PATCH v3 3/6] drivers/thermal/exynos: improve sanitize_temp_error
  • From: Mateusz Majewski <m.majewski2@xxxxxxxxxxx>
• [PATCH v3 5/6] drivers/thermal/exynos: add initial Exynos850 support
  • From: Mateusz Majewski <m.majewski2@xxxxxxxxxxx>
• [PATCH v3 6/6] dt-bindings: thermal: samsung,exynos: remove driver-specific information
  • From: Mateusz Majewski <m.majewski2@xxxxxxxxxxx>
• [PATCH v3 4/6] dt-bindings: thermal: samsung,exynos: add exynos850-tmu string
  • From: Mateusz Majewski <m.majewski2@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: serial: Add Loongson UART controller
  • From: Xi Ruoyao <xry111@xxxxxxxxxxx>
• [PATCH v3 2/6] drivers/thermal/exynos: use pm_sleep_ptr instead of conditional compilation
  • From: Mateusz Majewski <m.majewski2@xxxxxxxxxxx>
• [PATCH v3 1/6] drivers/thermal/exynos: use DEFINE_SIMPLE_DEV_PM_OPS
  • From: Mateusz Majewski <m.majewski2@xxxxxxxxxxx>
• [PATCH v3 0/6] Add initial Exynos850 support to the thermal driver
  • From: Mateusz Majewski <m.majewski2@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: timer: nxp,lpc3220-timer: Convert to dtschema
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH] dt-bindings: timer: nxp,lpc3220-timer: Convert to dtschema
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• [PATCH v1 06/10] dt-bindings: pinctrl: samsung: add exynos8895-wakeup-eint compatible
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• Re: [PATCH v3 4/5] arm64: dts: ti: k3-j721e*: Add bootph-* properties
  • From: Manorit Chawdhry <m-chawdhry@xxxxxx>
• [PATCH v1 00/10] Add minimal Exynos8895 SoC and SM-G950F support
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S8
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 09/10] dt-bindings: arm: samsung: Document dreamlte board binding
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 07/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 05/10] pinctrl: samsung: Add exynos8895 SoC pinctrl configuration
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 04/10] dt-bindings: pinctrl: samsung: Add compatible for Exynos8895 SoC
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 03/10] soc: samsung: exynos-chipid: add exynos8895 SoC support
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 02/10] dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v1 01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M2
  • From: ivo.ivanov.ivanov1@xxxxxxxxx
• [PATCH v4 3/7] media: mediatek: vcodec: flush decoder before stream off
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4 5/7] media: mediatek: vcodec: store source vb2 buffer
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4 2/7] media: mediatek: vcodec: change flush decode order when stream off
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4 6/7] media: mediatek: vcodec: replace v4l2_m2m_next_src_buf with v4l2_m2m_src_buf_remove
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4 4/7] media: mediatek: vcodec: using input information to get vb2 buffer
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4 7/7] media: mediatek: vcodec: remove media request checking
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4 1/7] media: mediatek: vcodec: setting request complete before buffer done
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v4 0/7] media: mediatek: vcodec: fix v4l2_ctrl_request_complete fail
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] tty: serial: 8250: Add loongson uart driver support
  • From: 郑豪威 <zhenghaowei@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: serial: Add Loongson UART controller
  • From: 郑豪威 <zhenghaowei@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: serial: Add Loongson UART controller
  • From: 郑豪威 <zhenghaowei@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] LoongArch: dts: Update UART driver to Loongson-2K0500, Loongson-2K1000 and Loongson-2K2000.
  • From: 郑豪威 <zhenghaowei@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 4/8] reset: mchp: sparx5: Add MCHP_LAN966X_PCI dependency
  • From: Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [RFC PATCH v3 03/37] dt-bindings: Add binding for kalray,kv3-1-intc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/5] arm64: dts: ti: k3-j784s4*: Remove bootph properties from parent nodes
  • From: "Kumar, Udit" <u-kumar1@xxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: ti: k3-j7200*: Add bootph-* properties
  • From: Manorit Chawdhry <m-chawdhry@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: stm32: Add compatible strings for Protonic boards
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: ti: k3-j721e*: Add bootph-* properties
  • From: "Kumar, Udit" <u-kumar1@xxxxxx>
• Re: [PATCH 1/6] regulator: mcp16502: Add supplier for regulators
  • From: <Andrei.Simion@xxxxxxxxxxxxx>
• [PATCH v2 2/2] arm: dts: st: Add MECIO1 and MECT1S board variants
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm: stm32: Add compatible strings for Protonic boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sa8775p-ride: Add QCS9100 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: ti: k3-j7200*: Add bootph-* properties
  • From: "Kumar, Udit" <u-kumar1@xxxxxx>
• Re: [PATCH 3/4] dt-bindings: arm: qcom: Document QCS9100 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/4] soc: qcom: socinfo: add QCS9100 ID
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: arm: qcom,ids: add SoC ID for QCS9100
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: amlogic: add C3 AW419 board
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 05/17] wifi: cc33xx: Add acx.c, acx.h
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 03/17] wifi: cc33xx: Add sdio.c, io.c, io.h
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v2 2/2] coresight: Add remote etm support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm: Add qcom,inst-id for remote etm
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2 0/2] coresight: Add remote etm support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v3 17/17] dt-bindings: net: wireless: cc33xx: Add ti,cc33xx.yaml
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 17/17] dt-bindings: net: wireless: cc33xx: Add ti,cc33xx.yaml
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 24/26] arch_numa: switch over to numa_memblks
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: net: Add rk3576 dwmac bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 26/26] docs: move numa=fake description to kernel-parameters.txt
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 25/26] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 24/26] arch_numa: switch over to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 23/26] of, numa: return -EINVAL when no numa-node-id is found
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 21/26] mm: numa_memblks: make several functions and variables static
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 20/26] mm: numa_memblks: introduce numa_memblks_init
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 19/26] mm: introduce numa_emulation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 18/26] mm: move numa_distance and related code from x86 to numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 17/26] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 16/26] x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 15/26] x86/numa_emu: use a helper function to get MAX_DMA32_PFN
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 14/26] x86/numa_emu: split __apicid_to_node update to a helper function
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 13/26] x86/numa_emu: simplify allocation of phys_dist
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 12/26] x86/numa: move FAKE_NODE_* defines to numa_emu
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 10/26] x86/numa: simplify numa_distance allocation
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 09/26] arch, mm: pull out allocation of NODE_DATA to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 08/26] mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 07/26] arch, mm: move definition of node_data to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 06/26] MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 05/26] MIPS: loongson64: rename __node_data to node_data
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 04/26] MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 03/26] MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 02/26] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 01/26] mm: move kernel/numa.c to mm/
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 00/26] mm: introduce numa_memblks
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: amlogic: add some device nodes for C3
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Manorit Chawdhry <m-chawdhry@xxxxxx>
• Re: [PATCH v1 0/2] Add sm8550 CAMSS core dtsi
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• Re: [PATCH 9/9] arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: magnetometer: ak8975: Add AK09118 support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: media: camss: Add qcom,sm8550-camss binding
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: imu: magnetometer: Add ak09118
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: timer: nxp,lpc3220-timer: Convert to dtschema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: timer: nxp,lpc3220-timer: Convert to dtschema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: amlogic: add some device nodes for C3
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: qcom-cci: Document SDM670 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: media: camss: Add qcom,sm8550-camss binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: clock: add rk3576 cru bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Manorit Chawdhry <m-chawdhry@xxxxxx>
• Re: [PATCH v2 2/3] clk: rockchip: Add dt-binding header for rk3576
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Neha Malcom Francis <n-francis@xxxxxx>
• RE: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Xilinx Versal platform
  • From: "Potthuri, Sai Krishna" <sai.krishna.potthuri@xxxxxxx>
• Re: [PATCH 3/3] arm64: dts: amlogic: add C3 AW419 board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Manorit Chawdhry <m-chawdhry@xxxxxx>
• [PATCH 1/2] dt-bindings: media: camss: Add qcom,sm8550-camss binding
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8550: camss: Add CAMSS block definition
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• [PATCH v1 0/2] Add sm8550 CAMSS core dtsi
  • From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Neha Malcom Francis <n-francis@xxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Manorit Chawdhry <m-chawdhry@xxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Manorit Chawdhry <m-chawdhry@xxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: display: mediatek: Add OF graph support for board path
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: regulator: mediatek,mt6397-regulator: convert to YAML
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH net-next v3 4/5] net: dsa: microchip: add WoL support for KSZ87xx family
  • From: <Arun.Ramadoss@xxxxxxxxxxxxx>
• Re: [PATCH net-next v3 2/5] net: dsa: microchip: move KSZ9477 WoL functions to ksz_common
  • From: <Arun.Ramadoss@xxxxxxxxxxxxx>
• Re: [PATCH net-next v3 3/5] net: dsa: microchip: generalize KSZ9477 WoL functions at ksz_common
  • From: <Arun.Ramadoss@xxxxxxxxxxxxx>
• Re: [PATCH net-next v3 5/5] net: dsa: microchip: apply KSZ87xx family fixes wrt datasheet
  • From: <Arun.Ramadoss@xxxxxxxxxxxxx>
• Re: [PATCH v8 00/11] PCI: imx6: Fix\rename\clean up and add lut information for imx95
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: amlogic: add C3 AW419 board
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH v8 05/11] PCI: imx6: Introduce SoC specific callbacks for controlling REFCLK
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v8 03/11] PCI: imx6: Fix missing call to phy_power_off() in error handling
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v2 0/5] Update the device tree for Ampere's BMC platform
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] Coresight: Add trace_id function to collect trace ID
  • From: JieGan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH v6 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: layerscape: move dwc3 usb under glue layer node
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v9 13/13] selftests: riscv: Support xtheadvector in vector tests
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 12/13] selftests: riscv: Fix vector tests
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 11/13] riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 10/13] riscv: hwprobe: Add thead vendor extension probing
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 09/13] riscv: vector: Support xtheadvector save/restore
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 08/13] riscv: Add xtheadvector instruction definitions
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 07/13] riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 06/13] RISC-V: define the elements of the VCSR vector CSR
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 05/13] riscv: vector: Use vlenb from DT for thead
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 04/13] riscv: Add thead and xtheadvector as a vendor extension
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 03/13] riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 02/13] dt-bindings: cpus: add a thead vlen register length property
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 01/13] dt-bindings: riscv: Add xtheadvector ISA extension description
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• [PATCH v9 00/13] riscv: Add support for xtheadvector
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 00/12] Fix USB suspend on TI J7200 (cdns3-ti, cdns3, xhci)
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH v8 4/5] wifi: brcmfmac: Add optional lpo clock enable support
  • From: Alexey Charkov <alchark@xxxxxxxxx>
• Re: [PATCH 3/4] media: camss: add support for SDM670 camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sdm670: add camss and cci
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: qcom-cci: Document SDM670 compatible
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sdm670: add camss and cci
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH 3/4] media: camss: add support for SDM670 camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH 2/4] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c: qcom-cci: Document SDM670 compatible
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH 0/4] Add SDM670 camera subsystem
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH 7/7] x86/hyperv: Use the ACPI wakeup mailbox for VTL2 guests when available
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 6/7] x86/hyperv: Reserve real mode when ACPI wakeup mailbox is available
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 5/7] x86/hyperv: Mark ACPI wakeup mailbox page as private
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 4/7] x86/hyperv: Parse the ACPI wakeup mailbox
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 3/7] x86/dt: Support the ACPI multiprocessor wakeup for device tree
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 2/7] dt-bindings: x86: Add ACPI wakeup mailbox
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 1/7] x86/acpi: Move ACPI MADT wakeup to generic code
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 0/7] x86/acpi: Move ACPI MADT wakeup to generic code
  • From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
• [PATCH 1/5] arm64: dts: ti: k3-am62a: Add ESM support
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH 4/5] arm64: dts: ti: k3-am6*: Add comment for ESM interrupt sources
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH 0/5] Fix ESM source interrupts
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH 5/5] arm64: dts: ti: k3-am6*: Fix comment in watchdog nodes
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH 2/5] arm64: dts: ti: k3-am62p: Fix ESM interrupt sources
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH 3/5] arm64: dts: ti: k3-am62p: Remove 'reserved' status
  • From: Judith Mendez <jm@xxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sdm670-google-sargo: enable gpu
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sdm670: add gpu
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 2/4] drm/msm/adreno: add a615 support
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: display/msm/gmu: Add SDM670 compatible
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v2 0/4] drm/msm/adreno: Add A615 GPU for SDM670 and Pixel 3a
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH 0/2] arm64: dts: ti: Update mux-controller node name
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: clock: add rk3576 cru bindings
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Add Synopsys DesignWare HDMI RX Controller
  • From: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
• [PATCH v4 2/2] watchdog: Add Watchdog Timer driver for RZ/V2H(P)
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: watchdog: renesas,wdt: Document RZ/V2H(P) SoC
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• [PATCH v4 0/2] Add Watchdog Timer driver for Renesas RZ/V2H(P) SoC
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH] dt-bindings: regulator: mediatek,mt6397-regulator: convert to YAML
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH v4 0/4] Add Synopsys DesignWare HDMI RX Controller
  • From: Tim Surber <me@xxxxxxxxxxxx>
• Re: [PATCH v8 00/11] PCI: imx6: Fix\rename\clean up and add lut information for imx95
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v4] arm64: dts: qcom: x1e80100-yoga: Update panel bindings
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH] dt-bindings: timer: nxp,lpc3220-timer: Convert to dtschema
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH v2 4/8] PCI: Change the parent to correctly represent pcie hierarchy
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3] PCI: Fix crash during pci_dev hot-unplug on pseries KVM guest
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 5/6] dt-bindings: mips: Document mti,mips-cm
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH can-next v2 01/20] dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v24 09/34] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 0/6] MIPS: cm: Probe GCR address from devicetree
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v8 7/7] iommu/riscv: Paging domain support
  • From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 7/8] PCI: qcom: Add support for host_stop_link() & host_start_link()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 4/8] PCI: Change the parent to correctly represent pcie hierarchy
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 0/8] Enable EUD on Qualcomm sm8450 SoC
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: soc: fsl: add missed compatible string fsl,ls*-isc
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: magnetometer: ak8975: Fix reading for ak099xx sensors
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: display: panel: samsung,atna45dc02: Document ATNA45DC02
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: net: Add rk3576 dwmac bindings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/1] dt-bindings: soc: fsl: Convert rcpm to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] drm/panel: jd9365da: Move the location of "exit sleep mode" and "set display on" commands
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: loongarch: Add la464 la664 CPU bindings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: misc: aspeed,ast2400-cvic: Convert to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 0/3] Init support for RK3576 UFS controller
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/2 RESEND] dt-bindings: arm: rockchip: Add NanoPi R2S Plus
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [RFC v7 5/6] gpio: mpfs: pass gpio line number as irq data
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [RFC v7 4/6] gpio: mpfs: add polarfire soc gpio support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH net-next 1/2] dt-bindings: net: dsa: microchip: add microchip,no-tag-protocol flag
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v3 08/17] wifi: cc33xx: Add main.c
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 17/17] dt-bindings: net: wireless: cc33xx: Add ti,cc33xx.yaml
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 10/17] wifi: cc33xx: Add tx.c, tx.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 15/17] wifi: cc33xx: Add testmode.c, testmode.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 13/17] wifi: cc33xx: Add conf.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 14/17] wifi: cc33xx: Add ps.c, ps.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 16/17] wifi: cc33xx: Add Kconfig, Makefile
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 12/17] wifi: cc33xx: Add scan.c, scan.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 11/17] wifi: cc33xx: Add init.c, init.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 00/17] wifi: cc33xx: Add driver for new TI CC33xx wireless device family
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 09/17] wifi: cc33xx: Add rx.c, rx.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 05/17] wifi: cc33xx: Add acx.c, acx.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 07/17] wifi: cc33xx: Add boot.c, boot.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 04/17] wifi: cc33xx: Add cmd.c, cmd.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 06/17] wifi: cc33xx: Add event.c, event.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 01/17] wifi: cc33xx: Add cc33xx.h, cc33xx_i.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 02/17] wifi: cc33xx: Add debug.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• [PATCH v3 03/17] wifi: cc33xx: Add sdio.c, io.c, io.h
  • From: Michael Nemanov <michael.nemanov@xxxxxx>
• Re: [PATCH 3/7] dt-bindings: PCI: altera: Add binding for Agilex
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH RFC 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 11/13] dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH can-next v2 01/20] dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: asahi-kasei,ak8975: drop incorrect AK09116 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: timer: nxp,lpc3220-timer: Convert to dtschema
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v4 0/2] Add support for Kontron OSM-S i.MX93 SoM and carrier board
  • From: Frieder Schrempf <frieder@xxxxxxx>
• Re: [PATCH v6 0/9] iio: adc: dfsdm: add scaling support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: magnetometer: ak8975: Add AK09118 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: Add power-domain header for RK3576 SoCs
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 1/1] dt-bindings: soc: fsl: add missed compatible string fsl,ls*-isc
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v2 1/3] iio: magnetometer: ak8975: Fix reading for ak099xx sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: imu: magnetometer: Add ak09118
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: asahi-kasei,ak8975: drop incorrect AK09116 compatible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: imu: magnetometer: Add ak09118
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v4 2/2] arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
  • From: Frieder Schrempf <frieder@xxxxxxx>
• [PATCH v4 1/2] dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boards
  • From: Frieder Schrempf <frieder@xxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: asahi-kasei,ak8975: drop incorrect AK09116 compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: vendor-prefixes: Add Jenson Display
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: display: panel-lvds: Add compatible for Jenson BL-JT60050-01A
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: msm8916-samsung-gt58: Enable the touchkeys
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v14 07/10] iommu/arm-smmu-v3: Maintain a SID->device structure
  • From: niliqiang <ni_liqiang@xxxxxxx>
• Re: [PATCH v3 2/2] watchdog: Add Watchdog Timer driver for RZ/V2H(P)
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH v1 3/3] scsi: ufs: rockchip: init support for UFS
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] nvme: assign of_node to nvme device
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v2 0/8] PCI: Enable Power and configure the QPS615 PCIe switch
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] clk: rockchip: Add dt-binding header for rk3576
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: display: bridge: add TI TDP158
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/3] clk: rockchip: Add clock controller for the RK3576
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] dt-bindings: timer: fsl,ftm-timer: Convert to dtschema
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: soc: ti: pruss: Add documentation for PA_STATS support
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH v3 2/2] arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: net: Add FSD EQoS device tree bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v24 23/34] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH v24 12/34] ASoC: doc: Add documentation for SOC USB
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH v24 05/34] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/9] dt-bindings: iio: add vref support to sd modulator
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v24 10/34] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH v24 06/34] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH v24 03/34] xhci: sideband: add initial api to register a sideband entity
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/9] dt-bindings: iio: add backend support to sd modulator
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: ti: am642-phyboard-electra: Add PRU-ICSSG nodes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RESEND PATCH] dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/5] arm64: dts: ti: k3-j721s2*: Add bootph-* properties
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH 05/11] dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 3/4] firmware: psci: Read and use vendor reset types
  • From: Shivendra Pratap <quic_spratap@xxxxxxxxxxx>
• Re: [PATCH v2 6/6] dt-bindings: thermal: samsung,exynos: remove outdated information on trip point count
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 0/2] PCI: ti: k3: Fix TI J721E PERST# polarity
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH 6/9] ASoC: audio-graph-card2: use new of_graph functions
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 5/9] ASoC: audio-graph-card: use new of_graph functions
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/9] ASoC: rcar_snd: use new of_graph functions
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
• RE: [PATCH v7 7/7] input: keyboard: support i.MX95 BBM module
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH v2 3/3] clk: rockchip: Add clock controller for the RK3576
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• RE: [PATCH v6 1/7] dt-bindings: firmware: add i.MX95 SCMI Extension protocol
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH v3 2/2] watchdog: Add Watchdog Timer driver for RZ/V2H(P)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: regulator: mediatek,mt6397-regulator: convert to YAML
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 0/4] arm64: dts: imx8mm-kontron: Add HDMI and LVDS display support
  • From: Frieder Schrempf <frieder@xxxxxxx>
• Re: [PATCH v3 2/2] watchdog: Add Watchdog Timer driver for RZ/V2H(P)
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v1] arm: dts: st: Add MECIO1 and MECT1S board variants
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v1 00/11] Tegra114: complete TF701T device tree
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: arm: rockchip: add support for Radxa ROCK Pi E v3.0
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: vendor-prefixes: Add Jenson Display
  • From: Frieder Schrempf <frieder@xxxxxxx>
• [PATCH 2/4] dt-bindings: display: panel-lvds: Add compatible for Jenson BL-JT60050-01A
  • From: Frieder Schrempf <frieder@xxxxxxx>
• Re: [PATCH] dt-bindings: regulator: mediatek,mt6397-regulator: convert to YAML
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: imx8mm-kontron: Add support for display bridges on BL i.MX8MM
  • From: Frieder Schrempf <frieder@xxxxxxx>
• [PATCH net-next v3 1/5] dt-bindings: net: dsa: microchip: add microchip,pme-active-high flag
  • From: vtpieter@xxxxxxxxx
• [PATCH net-next v3 4/5] net: dsa: microchip: add WoL support for KSZ87xx family
  • From: vtpieter@xxxxxxxxx
• [PATCH 4/4] arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS support
  • From: Frieder Schrempf <frieder@xxxxxxx>
• Re: [PATCH v1 05/11] ARM: nvidia: tf701t: add Bluetooth node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH net-next v3 3/5] net: dsa: microchip: generalize KSZ9477 WoL functions at ksz_common
  • From: vtpieter@xxxxxxxxx
• Re: [PATCH v1] arm: dts: st: Add MECIO1 and MECT1S board variants
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 24/26] arch_numa: switch over to numa_memblks
  • From: David Hildenbrand <david@xxxxxxxxxx>
• [PATCH net-next v3 5/5] net: dsa: microchip: apply KSZ87xx family fixes wrt datasheet
  • From: vtpieter@xxxxxxxxx
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: David Hildenbrand <david@xxxxxxxxxx>
• [PATCH net-next v3 2/5] net: dsa: microchip: move KSZ9477 WoL functions to ksz_common
  • From: vtpieter@xxxxxxxxx
• Re: [PATCH v3 26/26] docs: move numa=fake description to kernel-parameters.txt
  • From: David Hildenbrand <david@xxxxxxxxxx>
• [PATCH net-next v3 0/5] net: dsa: microchip: ksz8795: add Wake on LAN support
  • From: vtpieter@xxxxxxxxx
• Re: [PATCH v3 25/26] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 2/6] nvme: assign of_node to nvme device
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 20/26] mm: numa_memblks: introduce numa_memblks_init
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 23/26] of, numa: return -EINVAL when no numa-node-id is found
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 21/26] mm: numa_memblks: make several functions and variables static
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH RFC 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: nvme: Document nvme-card compatible
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 18/26] mm: move numa_distance and related code from x86 to numa_memblks
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 17/26] mm: introduce numa_memblks
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v1] arm: dts: st: Add MECIO1 and MECT1S board variants
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 16/26] x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: amlogic: add C3 AW419 board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 15/26] x86/numa_emu: use a helper function to get MAX_DMA32_PFN
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: amlogic: add some device nodes for C3
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 14/26] x86/numa_emu: split __apicid_to_node update to a helper function
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 13/26] x86/numa_emu: simplify allocation of phys_dist
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 12/26] x86/numa: move FAKE_NODE_* defines to numa_emu
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 2/6] nvme: assign of_node to nvme device
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v3 10/26] x86/numa: simplify numa_distance allocation
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 06/26] MIPS: loongson64: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 04/26] MIPS: sgi-ip27: drop HAVE_ARCH_NODEDATA_EXTENSION
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 03/26] MIPS: sgi-ip27: ensure node_possible_map only contains valid nodes
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 02/26] MIPS: sgi-ip27: make NODE_DATA() the same as on all other architectures
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v3 2/6] nvme: assign of_node to nvme device
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: nvme: Document nvme-card compatible
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: nvme: Document nvme-card compatible
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 2/6] nvme: assign of_node to nvme device
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: nvme: Document nvme-card compatible
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v1 11/11] ARM: nvidia: tf701t: configure USB
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 09/11] ARM: nvidia: tf701t: re-group GPIO keys
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 10/11] ARM: nvidia: tf701t: use dedicated backlight regulator
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 08/11] ARM: nvidia: tf701t: bind WIFI SDIO and EMMC
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 07/11] ARM: nvidia: tf701t: complete sound bindings
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 06/11] ARM: nvidia: tf701t: adjust sensors nodes
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• Re: [PATCH v1] arm: dts: st: Add MECIO1 and MECT1S board variants
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1 05/11] ARM: nvidia: tf701t: add Bluetooth node
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 04/11] ARM: nvidia: tf701t: add HDMI bindings
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 03/11] ARM: nvidia: tf701t: correct and complete PMIC and PMC bindings
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 01/11] ARM: nvidia: tf701t: use unimomentary pinmux setup
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 02/11] ARM: nvidia: tf701t: bind VDE device
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 00/11] Tegra114: complete TF701T device tree
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH] dt-bindings: regulator: mediatek,mt6397-regulator: convert to YAML
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 0/3] arm64: dts: ti: k3-am62p/j722s: Fix gpio-ranges
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v1] arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v2 7/7] clk: samsung: exynos7885: Add USB related clocks to CMU_FSYS
  • From: David Virag <virag.david003@xxxxxxxxx>
• [PATCH v2 6/7] clk: samsung: clk-pll: Add support for pll_1418x
  • From: David Virag <virag.david003@xxxxxxxxx>
• [PATCH v2 5/7] clk: samsung: exynos7885: Add missing MUX clocks from PLLs in CMU_TOP
  • From: David Virag <virag.david003@xxxxxxxxx>
• [PATCH v2 4/7] clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix
  • From: David Virag <virag.david003@xxxxxxxxx>
• [PATCH v2 3/7] dt-bindings: clock: exynos7885: Add indices for USB clocks
  • From: David Virag <virag.david003@xxxxxxxxx>
• [PATCH v2 2/7] dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices
  • From: David Virag <virag.david003@xxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: clock: exynos7885: Fix duplicated binding
  • From: David Virag <virag.david003@xxxxxxxxx>
• [PATCH v2 0/7] Add USB clocks to Exynos7885
  • From: David Virag <virag.david003@xxxxxxxxx>
• [PATCH v1] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1] arm: dts: st: Add MECIO1 and MECT1S board variants
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Add Synopsys DesignWare HDMI RX Controller
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• [PATCH 4/4] ASoC: dt-bindings: qcom,wcd939x: Correct reset GPIO polarity in example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/4] ASoC: dt-bindings: qcom,wcd938x: Correct reset GPIO polarity in example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/4] ASoC: dt-bindings: qcom,wcd934x: Correct reset GPIO polarity in example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/4] ASoC: dt-bindings: qcom,wcd937x: Correct reset GPIO polarity in example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 6/6] mtd: parser: add support for Airoha parser
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 5/6] dt-bindings: mtd: Add Documentation for Airoha fixed-partitions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 4/6] block2mtd: attach device OF node to MTD device
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 3/6] dt-bindings: mmc: add property for partitions node in mmc-card node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 2/6] nvme: assign of_node to nvme device
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: nvme: Document nvme-card compatible
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 0/6] mtd: improve block2mtd + airoha parser
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 6/6] mtd: parser: add support for Airoha parser
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• RE: [PATCH v9 0/3] adp5588-keys: Support for dedicated gpio operation
  • From: "Agarwal, Utsav" <Utsav.Agarwal@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: mediatek: mt8186-corsola: Update ADSP reserved memory region
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• RE: [PATCH v9 3/3] dt-bindings: input: Update dtbinding for adp5588
  • From: "Agarwal, Utsav" <Utsav.Agarwal@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 0/3] adp5588-keys: Support for dedicated gpio operation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 3/3] dt-bindings: input: Update dtbinding for adp5588
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
  • From: Animesh Agarwal <animeshagarwal28@xxxxxxxxx>
• Re: [PATCH v5 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: amlogic: add C3 AW419 board
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: amlogic: add some device nodes for C3
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• [PATCH 0/3] add some node for amlogic c3
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: clock: fix C3 PLL input parameter
  • From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: ufs: Document Rockchip UFS host controller
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• RE: [PATCH v9 0/3] adp5588-keys: Support for dedicated gpio operation
  • From: "Agarwal, Utsav" <Utsav.Agarwal@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: adc: add support for pac1921
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• [PATCH v3] arm64: dts: qcom: sc8280xp-x13s: Enable RGB sensor
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/2] clk: imx93: Move IMX93_CLK_END macro to clk driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 6/6] mtd: parser: add support for Airoha parser
  • From: Philip Li <philip.li@xxxxxxxxx>
• [PATCH v1 2/3] dt-bindings: ufs: Document Rockchip UFS host controller
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH v9 3/3] dt-bindings: input: Update dtbinding for adp5588
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v9 0/3] adp5588-keys: Support for dedicated gpio operation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add kukui-jacuzzi-cerise and kukui-jacuzzi-stern DT and dt-binding
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 1/3] scsi: ufs: core: Export ufshcd_dme_link_startup() helper
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH 9/9] arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  • From: Teresa Remmet <T.Remmet@xxxxxxxxx>
• Re: [PATCH] arm64: dts: mediatek: mt8183: Remove clock from mfg_async power domain
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] Bluetooth: hci_uart: Add support for Amlogic HCI UART
  • From: Yang Li <yang.li@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] firmware: ti_sci: Partial-IO support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v9 3/3] dt-bindings: input: Update dtbinding for adp5588
  • From: Utsav Agarwal via B4 Relay <devnull+utsav.agarwal.analog.com@xxxxxxxxxx>
• [PATCH v9 0/3] adp5588-keys: Support for dedicated gpio operation
  • From: Utsav Agarwal via B4 Relay <devnull+utsav.agarwal.analog.com@xxxxxxxxxx>
• [PATCH v9 2/3] Input: adp5588-keys - add support for pure gpio
  • From: Utsav Agarwal via B4 Relay <devnull+utsav.agarwal.analog.com@xxxxxxxxxx>
• [PATCH v9 1/3] Input: adp5588-keys - use guard notation when acquiring mutexes
  • From: Utsav Agarwal via B4 Relay <devnull+utsav.agarwal.analog.com@xxxxxxxxxx>
• Re: [PATCH v5 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: ufs: Document Rockchip UFS host controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] clk: imx93: Move IMX93_CLK_END macro to clk driver
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• Re: [PATCH v3 2/3] Bluetooth: hci_uart: Add support for Amlogic HCI UART
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 3/3] scsi: ufs: rockchip: init support for UFS
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: mt8183-kukui: clean up regulator tree
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 8/9] arm64: dts: imx8mm: Add fallback compatible string fsl,imx8mm
  • From: Teresa Remmet <T.Remmet@xxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: ti, sci: Add property for partial-io-wakeup-sources
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/6] firmware: ti_sci: Partial-IO support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v2 5/5] ARM: dts: aspeed: mtmitchell: Add LEDs
  • From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/5] ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15
  • From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/5] ARM: dts: aspeed: mtmitchell: Add Riser cards
  • From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/5] ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias ports
  • From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/5] ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensors
  • From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/5] Update the device tree for Ampere's BMC platform
  • From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: ti, sci: Add property for partial-io-wakeup-sources
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH 0/6] Update the device tree for Ampere's BMC platform
  • From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth
  • From: Yang Li <yang.li@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/3] Bluetooth: hci_uart: Add support for Amlogic HCI UART
  • From: Yang Li <yang.li@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] firmware: ti_sci: Partial-IO support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/6] firmware: ti_sci: Partial-IO support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: ti, sci: Add property for partial-io-wakeup-sources
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: misc: aspeed,ast2400-cvic: Convert to DT schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 3/3] iio: magnetometer: ak8975: Add AK09118 support
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: imu: magnetometer: Add ak09118
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] iio: magnetometer: ak8975: Fix reading for ak099xx sensors
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] Add support for AK09918
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interrupt-controller: aspeed,ast2400-vic: Convert to DT schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: soc: fsl: add missed compatible string fsl,ls*-isc
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mmc: renesas,sdhi: Remove duplicate compatible and add clock checks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: asahi-kasei,ak8975: drop incorrect AK09116 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] iio: magnetometer: ak8975: drop incorrect AK09116 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: magnetometer: ak8975: Add AK09118 support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: imu: magnetometer: Add ak09118
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v2 4/5] arm64: dts: imx95: add usb3 related nodes
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v2 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v3 0/2] Add kukui-jacuzzi-cerise and kukui-jacuzzi-stern DT and dt-binding
  • From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH 9/9] media: xilinx-tpg: use new of_graph functions
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 8/9] fbdev: omapfb: use new of_graph functions
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 7/9] gpu: drm: omapdrm: use new of_graph functions
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 6/9] ASoC: audio-graph-card2: use new of_graph functions
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 5/9] ASoC: audio-graph-card: use new of_graph functions
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 4/9] ASoC: rcar_snd: use new of_graph functions
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 3/9] ASoC: test-component: use new of_graph functions
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 2/9] of: property: add of_graph_get_next_port_endpoint()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 1/9] of: property: add of_graph_get_next_port()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 0/9] of: property: add of_graph_get_next_port/port_endpoint()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: mediatek: mt8183: Remove clock from mfg_async power domain
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH 2/4] soc: qcom: socinfo: add QCS9100 ID
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: arm: qcom,ids: add SoC ID for QCS9100
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sa8775p-ride: Add QCS9100 compatible
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: arm: qcom: Document QCS9100 compatible
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 0/4] soc: qcom: Add QCS9100 SoC ID and compatible support
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v2 2/2] drm/panel: jd9365da: Modify the init code of Melfas
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] drm/panel: jd9365da: Move the location of "exit sleep mode" and "set display on" commands
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Modify the method of sending "exit sleep
  • From: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v7 0/2] Add Meta(Facebook) Catalina BMC(AST2600)
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
  • From: Keguang Zhang <keguang.zhang@xxxxxxxxx>
• Re: [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver
  • From: Stanley Chu <stanley.chuys@xxxxxxxxx>
• Re: [PATCH v2 net-next 0/2] Add support for EN7581 to mt7530 driver
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: arm: rockchip: add support for Radxa ROCK Pi E v3.0
  • From: FUKAUMI Naoki <naoki@xxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: rockchip: add support for Radxa ROCK Pi E v3.0
  • From: FUKAUMI Naoki <naoki@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: rockchip: add support for Radxa ROCK Pi E v3.0
  • From: FUKAUMI Naoki <naoki@xxxxxxxxx>
• [PATCH v4 2/2] drm/tiny: Add driver for Sharp Memory LCD
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: display: Add Sharp Memory LCD bindings
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH v4 0/2] Add driver for Sharp Memory LCD
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: trivial-devices: Document elgin,jg10309-01
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dt-bindings: mmc: renesas,sdhi: Remove duplicate compatible and add clock checks
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH v3 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• Re: [PATCH v3 2/2] watchdog: Add Watchdog Timer driver for RZ/V2H(P)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/3] iio: magnetometer: ak8975: Add AK09118 support
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: imu: magnetometer: Add ak09118
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH 1/3] iio: magnetometer: ak8975: Fix reading for ak099xx sensors
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH 0/3] Add support for AK09918
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/26] mm: introduce numa_memblks
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v3 25/26] mm: make range-to-target_node lookup facility a part of numa_memblks
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v4 3/8] mfd: syscon: Add reference counting and device managed support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 22/26] mm: numa_memblks: use memblock_{start,end}_of_DRAM() when sanitizing meminfo
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: imx95: add flexcan[1..5] support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/2] arm64: dts: imx95: add DDR Perf Monitor node
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v4 1/8] misc: Add support for LAN966x PCI device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: pinctrl: Add pinctrl for Sophgo CV1800 series SoC.
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 19/26] mm: introduce numa_emulation
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH v3 2/2] watchdog: Add Watchdog Timer driver for RZ/V2H(P)
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: watchdog: renesas,wdt: Document RZ/V2H(P) SoC
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• [PATCH v3 0/2] Add Watchdog Timer driver for Renesas RZ/V2H(P) SoC
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 11/26] x86/numa: use get_pfn_range_for_nid to verify that node spans memory
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH 02/10] dt-bindings: arm: rockchip: Add rk576 compatible string to pmu.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 00/26] mm: introduce numa_memblks
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: mfd: add binding for qnap,ts433-mcu devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: rockchip: Add base DT for rk3528 SoC
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH 1/1] RISC-V: Add parameter to unaligned access speed
  • From: Evan Green <evan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: nvmem: imx-ocotp: support i.MX95
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 1/1] RISC-V: Add parameter to unaligned access speed
  • From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
• Re: [PATCH 1/1] RISC-V: Add parameter to unaligned access speed
  • From: Evan Green <evan@xxxxxxxxxxxx>
• Re: layerscape interrupt-map warning problem, may be dtb.py bug
  • From: Frank Li <Frank.li@xxxxxxx>
• RE: [PATCH v8 2/3] Input: adp5588-keys - add support for pure gpio
  • From: "Agarwal, Utsav" <Utsav.Agarwal@xxxxxxxxxx>
• Re: [RFC 1/1] of-fpga-region: Add sysfs interface support for FPGA configuration
  • From: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-n900: correct the accelerometer orientation
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• [PATCH] arm64: dts: imx8mp-verdin: drop limit to sdio wi-fi frequency to 100 mhz
  • From: João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
• [PATCH] arm64: dts: ti: k3-j784s4-main: align watchdog clocks
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 0/1] RISC-V: kernel parameter for unaligned access speed
  • From: Jesse Taube <jesse@xxxxxxxxxxxx>
• [PATCH 1/1] RISC-V: Add parameter to unaligned access speed
  • From: Jesse Taube <jesse@xxxxxxxxxxxx>
• Re: [PATCH v4 1/1] dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: dma: mv-xor-v2: Convert to dtschema
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH 0/3] dma: Enable DMA support for the Renesas RZ/G3S SoC
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v9 1/3] dt-bindings: dmaengine: Add dma multiplexer for CV18XX/SG200X series SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 2/3] Bluetooth: hci_uart: Add support for Amlogic HCI UART
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 09/26] arch, mm: pull out allocation of NODE_DATA to generic code
  • From: Mike Rapoport <rppt@xxxxxxxxxx>
• [PATCH v4 5/6] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 6/6] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 4/6] misc: fastrpc: Add support for cdsp1 remoteproc
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 3/6] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 2/6] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v4 0/4] Add Synopsys DesignWare HDMI RX Controller
  • From: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
• Re: [PATCH 1/9] arm64: dts: layerscape: use short name about thermal zone
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: rockchip: Add base DT for rk3528 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: qnap-ts433: Simplify network PHY connection
  • From: Diederik de Haas <didi.debian@xxxxxxxxx>
• Re: [PATCH v11 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: qnap-ts433: Simplify network PHY connection
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2 0/3] Add initial support for the Rockchip RK3588 HDMI TX Controller
  • From: Piotr Oniszczuk <piotr.oniszczuk@xxxxxxxxx>
• [PATCH v2 1/1] arm64: dts: imx93: add lpi2c1 and st lsm6dso node
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v2 0/4] Cleanup Spreadtum/Unisoc ARM64 DT
  • From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
• Re: [PATCH v2 0/4] Add clock provider support to Rockchip RK3588 HDMI TX PHY
  • From: Vinod Koul <vkoul@xxxxxxxxxx>