On 15:11-20240807, Beleswar Prasad Padhi wrote: > Hi Manorit, > > On 31/07/24 22:40, Manorit Chawdhry wrote: > > J742S2 EVM board is designed for TI J742S2 SoC. It supports the following > > interfaces: > > * 16 GB DDR4 RAM > > * x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode > > * x1 Input Audio Jack, x1 Output Audio Jack > > * x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port > > * x1 4L PCIe connector > > * x1 UHS-1 capable micro-SD card slot > > * 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash, > > UFS flash. > > * x6 UART through UART-USB bridge > > * XDS110 for onboard JTAG debug using USB > > * Temperature sensors, user push buttons and LEDs > > * x1 GESI expander, x2 Display connector > > * x1 15-pin CSI header > > * x6 MCAN instances > > > > Link: https://www.ti.com/lit/ug/sprujd8/sprujd8.pdf (EVM user guide) > > Link: https://www.ti.com/lit/zip/SPAC001 (Schematics) > > Signed-off-by: Manorit Chawdhry <m-chawdhry@xxxxxx> > > > For series, > Reviewed-By: Beleswar Padhi <b-padhi@xxxxxx> Please follow the convention - if you are acking the series, reply to the cover-letter such that tools like b4 can pick it up, else this ack belongs to the current patch. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
