Hello all,
On 2024-08-06 15:03, Christian Marangi wrote:
On Tue, Aug 06, 2024 at 02:43:12PM +0200, Christoph Hellwig wrote:
On Tue, Aug 06, 2024 at 01:41:12PM +0200, Christian Marangi wrote:
> Introduce support for a dedicated node for a nvme card. This will be a
> subnode of the nvme controller node that will have the "nvme-card"
> compatible.
>
> This follow a similar implementation done for mmc where the specific mmc
> card have a dedicated of_node.
>
> This can be used for scenario where block2mtd module is used to declare
> partition in DT and block2mtd is called on the root block of the nvme
> card, permitting the usage of fixed-partition parser or alternative
> ones.
Err, hell no. Why would you wire up a purely PCIe device to OF?
PCIe is self-discovering.
Well on embedded pure PCIe card most of the time are not a thing...
Unless it's an enterprise product, everything is integrated in the pcb
and not detachable for cost saving measure or also if the thing use
PCIe
protocol but it tighlty coupled with the SoC.
This implementation is already very common for all kind of pcie devices
like wireless card, gpio expander that are integrated in the PCB and
require property in DT like calibration data, quirks or GPIO pin
definitions, i2c...
In modern SoC we are seeing an influx of using cheap flash storage
option instead of NAND or NOR as modern hw require more space and price
increase is not that high... Almost any high tier device is switching
to
using emmc and even attached NVME and simulating MTD with them for easy
usage.
Please consider this well used scenario in emebedded where PCIe is just
a comunication way and the concept of detachable doesn't exist at all
and things can be described in DT as static. Also these storage are
used
for rootfs mount so userspace is not so viable.
As a note, perhaps this is another good example of a "fixed layout"
PCIe device found on an SBC:
https://lore.kernel.org/linux-rockchip/20240805073425.3492078-1-jacobe.zang@xxxxxxxxxx/T/#u
