According to binding doc http://devicetree.org/schemas/spi/fsl,dspi.yaml and driver drivers/spi/spi-fsl-dspi.c, default is little-endian, should use big-endian for big-endian system. Remove 'little-endian' to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtb: spi@2100000: Unevaluated properties are not allowed ('little-endian' was unexpected) Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index acf293310f7a0..36e23d7b1676b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -381,7 +381,6 @@ dspi0: spi@2100000 { dmas = <&edma0 0 62>, <&edma0 0 60>; dma-names = "tx", "rx"; spi-num-chipselects = <4>; - little-endian; status = "disabled"; }; @@ -397,7 +396,6 @@ dspi1: spi@2110000 { dmas = <&edma0 0 58>, <&edma0 0 56>; dma-names = "tx", "rx"; spi-num-chipselects = <4>; - little-endian; status = "disabled"; }; @@ -413,7 +411,6 @@ dspi2: spi@2120000 { dmas = <&edma0 0 54>, <&edma0 0 2>; dma-names = "tx", "rx"; spi-num-chipselects = <3>; - little-endian; status = "disabled"; }; -- 2.34.1
