Re: [PATCH 2/4] dt-bindings: media: camss: Add qcom,sdm670-camss

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 06, 2024 at 06:42:23PM -0400, Richard Acayan wrote:
> Add the camera subsystem for the Snapdragon 670.
>
> Adapted from SC8280XP camera subsystem.
>
> Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
> ---
>  .../bindings/media/qcom,sdm670-camss.yaml     | 353 ++++++++++++++++++
>  1 file changed, 353 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
> new file mode 100644
> index 000000000000..543fad1b5cd7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
> @@ -0,0 +1,353 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)

Oops, forgot to correct this.

Don't worry if you have read the bindings already. It can be used under
BSD-2-Clause.

> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SDM670 Camera Subsystem (CAMSS)
> +
> +maintainers:
> +  - Richard Acayan <mailingradian@xxxxxxxxx>
> +
> +description:
> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
> +
> +properties:
> +  compatible:
> +    const: qcom,sdm670-camss
> +
> +  clocks:
> +    maxItems: 33
> +
> +  clock-names:
> +    items:
> +      - const: camnoc_axi
> +      - const: cpas_ahb
> +      - const: cphy_rx_src
> +      - const: csi0
> +      - const: csi0_src
> +      - const: csi1
> +      - const: csi1_src
> +      - const: csi2
> +      - const: csi2_src
> +      - const: csiphy0
> +      - const: csiphy0_timer
> +      - const: csiphy0_timer_src
> +      - const: csiphy1
> +      - const: csiphy1_timer
> +      - const: csiphy1_timer_src
> +      - const: csiphy2
> +      - const: csiphy2_timer
> +      - const: csiphy2_timer_src
> +      - const: gcc_camera_ahb
> +      - const: gcc_camera_axi
> +      - const: slow_ahb_src
> +      - const: soc_ahb
> +      - const: vfe0_axi
> +      - const: vfe0
> +      - const: vfe0_cphy_rx
> +      - const: vfe0_src
> +      - const: vfe1_axi
> +      - const: vfe1
> +      - const: vfe1_cphy_rx
> +      - const: vfe1_src
> +      - const: vfe_lite
> +      - const: vfe_lite_cphy_rx
> +      - const: vfe_lite_src
> +
> +  interrupts:
> +    maxItems: 9
> +
> +  interrupt-names:
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: vfe0
> +      - const: vfe1
> +      - const: vfe_lite
> +
> +  iommus:
> +    maxItems: 4
> +
> +  power-domains:
> +    items:
> +      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> +  power-domain-names:
> +    items:
> +      - const: ife0
> +      - const: ife1
> +      - const: top
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    description:
> +      CSI input ports.
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data from CSIPHY0.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              clock-lanes:
> +                maxItems: 1
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data from CSIPHY1.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              clock-lanes:
> +                maxItems: 1
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data from CSIPHY2.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              clock-lanes:
> +                maxItems: 1
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +  reg:
> +    maxItems: 9
> +
> +  reg-names:
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: vfe0
> +      - const: csiphy0
> +      - const: vfe1
> +      - const: csiphy1
> +      - const: vfe_lite
> +      - const: csiphy2
> +
> +  vdda-phy-supply:
> +    description:
> +      Phandle to a regulator supply to PHY core block.
> +
> +  vdda-pll-supply:
> +    description:
> +      Phandle to 1.8V regulator supply to PHY refclk pll block.
> +
> +required:
> +  - clock-names
> +  - clocks
> +  - compatible
> +  - interconnects
> +  - interconnect-names
> +  - interrupts
> +  - interrupt-names
> +  - iommus
> +  - power-domains
> +  - power-domain-names
> +  - reg
> +  - reg-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |

Include directives are missing and will be added next version.

> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        camss {
> +            compatible = "qcom,sdm670-camss";
> +
> +            reg = <0 0x0ac65000 0 0x1000>,
> +                  <0 0x0ac66000 0 0x1000>,
> +                  <0 0x0ac67000 0 0x1000>,
> +                  <0 0x0acaf000 0 0x4000>,
> +                  <0 0x0acb3000 0 0x1000>,
> +                  <0 0x0acb6000 0 0x4000>,
> +                  <0 0x0acba000 0 0x1000>,
> +                  <0 0x0acc4000 0 0x4000>,
> +                  <0 0x0acc8000 0 0x1000>;
> +            reg-names = "csiphy0",
> +                        "csiphy1",
> +                        "csiphy2",
> +                        "vfe0",
> +                        "csid0",
> +                        "vfe1",
> +                        "csid1",
> +                        "vfe_lite",
> +                        "csid2";
> +
> +            interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "csid0",
> +                              "csid1",
> +                              "csid2",
> +                              "csiphy0",
> +                              "csiphy1",
> +                              "csiphy2",
> +                              "vfe0",
> +                              "vfe1",
> +                              "vfe_lite";
> +
> +            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
> +                     <&camcc CAM_CC_CPAS_AHB_CLK>,
> +                     <&camcc CAM_CC_CPHY_RX_CLK_SRC>,
> +                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
> +                     <&camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
> +                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
> +                     <&camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
> +                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
> +                     <&camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
> +                     <&camcc CAM_CC_CSIPHY0_CLK>,
> +                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> +                     <&camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
> +                     <&camcc CAM_CC_CSIPHY1_CLK>,
> +                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
> +                     <&camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
> +                     <&camcc CAM_CC_CSIPHY2_CLK>,
> +                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
> +                     <&camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
> +                     <&gcc GCC_CAMERA_AHB_CLK>,
> +                     <&gcc GCC_CAMERA_AXI_CLK>,
> +                     <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
> +                     <&camcc CAM_CC_SOC_AHB_CLK>,
> +                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
> +                     <&camcc CAM_CC_IFE_0_CLK>,
> +                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> +                     <&camcc CAM_CC_IFE_0_CLK_SRC>,
> +                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
> +                     <&camcc CAM_CC_IFE_1_CLK>,
> +                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> +                     <&camcc CAM_CC_IFE_1_CLK_SRC>,
> +                     <&camcc CAM_CC_IFE_LITE_CLK>,
> +                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
> +                     <&camcc CAM_CC_IFE_LITE_CLK_SRC>;
> +            clock-names = "camnoc_axi",
> +                          "cpas_ahb",
> +                          "cphy_rx_src",
> +                          "csi0",
> +                          "csi0_src",
> +                          "csi1",
> +                          "csi1_src",
> +                          "csi2",
> +                          "csi2_src",
> +                          "csiphy0",
> +                          "csiphy0_timer",
> +                          "csiphy0_timer_src",
> +                          "csiphy1",
> +                          "csiphy1_timer",
> +                          "csiphy1_timer_src",
> +                          "csiphy2",
> +                          "csiphy2_timer",
> +                          "csiphy2_timer_src",
> +                          "gcc_camera_ahb",
> +                          "gcc_camera_axi",
> +                          "slow_ahb_src",
> +                          "soc_ahb",
> +                          "vfe0_axi",
> +                          "vfe0",
> +                          "vfe0_cphy_rx",
> +                          "vfe0_src",
> +                          "vfe1_axi",
> +                          "vfe1",
> +                          "vfe1_cphy_rx",
> +                          "vfe1_src",
> +                          "vfe_lite",
> +                          "vfe_lite_cphy_rx",
> +                          "vfe_lite_src";
> +
> +            iommus = <&apps_smmu 0x808 0x0>,
> +                     <&apps_smmu 0x810 0x8>,
> +                     <&apps_smmu 0xc08 0x0>,
> +                     <&apps_smmu 0xc10 0x8>;
> +
> +            power-domains = <&camcc IFE_0_GDSC>,
> +                            <&camcc IFE_1_GDSC>,
> +                            <&camcc TITAN_TOP_GDSC>;
> +            power-domain-names = "ife0",
> +                                 "ife1",
> +                                 "top";
> +
> +            vdda-phy-supply = <&vreg_l1a_1p225>;
> +            vdda-pll-supply = <&vreg_l8a_1p8>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    csiphy_ep0: endpoint {
> +                        reg = <0>;
> +                        clock-lanes = <7>;
> +                        data-lanes = <0 1 2 3>;
> +                        remote-endpoint = <&front_sensor_ep>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.46.0
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux