On Monday, 5 August 2024 18:33:52 CEST Heiko Stübner wrote: > Am Montag, 4. März 2024, 17:47:22 CEST schrieb Diederik de Haas: > > On Monday, 4 March 2024 16:46:59 CET Jonas Karlman wrote: > > > Sorry for not getting back to you sooner, but yes I would check with > > > phy-mode = "rgmii-id". There is also a possible issue with rk gmac > > > driver in both U-Boot and linux, it always set enable tx/rx delay bit. > > > > > Please, try with following in U-Boot: > > No worries :) > > Will try your suggestions soon, but it's probably better to take that > > discussion somewhere else to not further clutter up this patch/thread. > > did you get somewhere with your testing? Yeah, none of the patches made a difference: On zaterdag 9 maart 2024 15:51:50 CEST Diederik de Haas wrote: > I did the following tests based on 2024.01 on my Q64-B: > - conditional delay: FAIL > - grf fix: FAIL > - conditional delay + grf fix: FAIL > > Then I rebased upon 2024.04-rc4: > - conditional delay + grf fix: FAIL > I skipped the other variations, but could do that if that could be useful. After the 2024.07 release I checked again and it still failed and my workaround (partial revert) still worked, so I reported it to the u-boot ML: https://lore.kernel.org/u-boot/2086393.9F9pDXStbY@bagend/
Attachment:
signature.asc
Description: This is a digitally signed message part.
