[PATCH 3/4] ASoC: dt-bindings: qcom,wcd938x: Correct reset GPIO polarity in example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The reset GPIO of WCD9380/WCD9385 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index cf6c3787adfe..10531350c336 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -34,9 +34,10 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     codec {
         compatible = "qcom,wcd9380-codec";
-        reset-gpios = <&tlmm 32 0>;
+        reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
         #sound-dai-cells = <1>;
         qcom,tx-device = <&wcd938x_tx>;
         qcom,rx-device = <&wcd938x_rx>;
-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux