From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> Patch 1: board DT bindings Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees Changes for v2: DT bindings (patch1): * Add tags from Krzysztof and Conor (thanks!) SMARC DTs (patch 3): * Fix GPIO labels * Add support for TPM chip on SMARC module * Disable PWM in favor of GPIO5 on SMARC carrier * Enable LCDIF node to make HDMI work * Add support for GPIO expanders on SMARC carrier * Remove SPI flash as its removable and should be in an overlay * Add CAN regulators to fix transceiver enable Frieder Schrempf (3): dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier board arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval carrier .../devicetree/bindings/arm/fsl.yaml | 13 + arch/arm64/boot/dts/freescale/Makefile | 6 + .../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 307 ++++++ .../boot/dts/freescale/imx8mp-kontron-dl.dtso | 112 +++ .../dts/freescale/imx8mp-kontron-osm-s.dtsi | 908 ++++++++++++++++++ .../imx8mp-kontron-smarc-eval-carrier.dts | 258 +++++ .../dts/freescale/imx8mp-kontron-smarc.dtsi | 281 ++++++ 7 files changed, 1885 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi -- 2.45.2