Re: [PATCH v4 0/4] Add Synopsys DesignWare HDMI RX Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tim,

Le dimanche 04 août 2024 à 01:57 +0200, Tim Surber a écrit :
> Hi Shreeya,
> 
> I tested your patch and noticed problems when using 3840x2160 resolution 
> at  60fps.
> 
> For my testing I connected an HDMI source and set it to 4k60fps. I 
> verified that this source and the cables work on a screen at this 
> resolution.
> 
> Using
> 'v4l2-ctl --verbose -d /dev/video1 
> --set-fmt-video=width=3840,height=2160,pixelformat='NV12' 
> --stream-mmap=4 --stream-skip=3 --stream-count=100 --stream-poll'
> I get the video format output, but not the periodic output which shows 
> the fps.
> 
> Using
> 'GST_DEBUG=4 gst-launch-1.0 -v v4l2src device=/dev/video1 ! 
> fpsdisplaysink text-overlay=false video-sink="fakevideosink"'
> I get the following error message:
> 
> (gst-launch-1.0:3231): GStreamer-CRITICAL **: 01:34:39.137: 
> gst_memory_resize: assertion 'size + mem->offset + offset <= 
> mem->maxsize' failed
> 0:00:03.489382529  3231 0xffffa0000b90 WARN  v4l2bufferpool 
> gstv4l2bufferpool.c:2209:gst_v4l2_buffer_pool_process:<v4l2src0:pool0:src> 
> Dropping truncated buffer, this is likely a driver bug.
> 0:00:03.489421906  3231 0xffffa0000b90 WARN  bufferpool 
> gstbufferpool.c:1252:default_reset_buffer:<v4l2src0:pool0:src> Buffer 
> 0xffff98008e80 without the memory tag has maxsize (8294400) that is 
> smaller than the configured buffer pool size (12441600). The buffer will 
> be not be reused. This is most likely a bug in this GstBufferPool subclass

We'll need to check if its a userspace issue rather then kernel one. You can
test with v4l2-ctl (change 0 to the index of your video node):

v4l2-ctl -d 0 --stream-mmap --set-fmt-video=width=3840,height=2160 --set-parm 60

The option --stream-to let you write to a file (will be slower then real-time
though).

Nicolas

> 
> 
> Everything works with 4k30fps or 1080p 60fps. The hardware should 
> support 4k60fps.
> 
> Best regards,
> Tim
> 
> On 19.07.24 14:40, Shreeya Patel wrote:
> > This series implements support for the Synopsys DesignWare
> > HDMI RX Controller, being compliant with standard HDMI 1.4b
> > and HDMI 2.0.
> > 
> > Features that are currently supported by the HDMI RX driver
> > have been tested on rock5b board using a HDMI to micro-HDMI cable.
> > It is recommended to use a good quality cable as there were
> > multiple issues seen during testing the driver.
> > 
> > Please note the below information :-
> > * While testing the driver on rock5b we noticed that the binary BL31
> > from Rockchip contains some unknown code to get the HDMI-RX PHY
> > access working without any errors.
> > With TF-A BL31, the HDMI-RX PHY also works fine but there were no
> > interrupts seen for rk_hdmirx-hdmi leading to some errors when
> > loading the driver [0]. It doesn't affect the functionality of the
> > driver though.
> > * We have tested the working of OBS studio with HDMIRX driver and
> > there were no issues seen.
> > * We also tested and verified the support for interlaced video.
> > 
> > [0] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/trusted-firmware-a/-/issues/1
> > 
> > To test the HDMI RX Controller driver, following example commands can be used :-
> > 
> > root@debian-rockchip-rock5b-rk3588:~# v4l2-ctl --verbose -d /dev/video0 \
> > --set-fmt-video=width=1920,height=1080,pixelformat='BGR3' --stream-mmap=4 \
> > --stream-skip=3 --stream-count=100 --stream-to=/home/hdmiin4k.raw --stream-poll
> > 
> > root@debian-rockchip-rock5b-rk3588:~# ffmpeg -f rawvideo -vcodec rawvideo \
> > -s 1920x1080 -r 60 -pix_fmt bgr24 -i /home/hdmiin4k.raw output.mkv
> > 
> > CEC compliance test results :-
> > 
> > * https://gitlab.collabora.com/-/snippets/381
> > * https://gitlab.collabora.com/-/snippets/380
> > 
> > Following is the v4l2-compliance test result :-
> > 
> > root@debian-rockchip-rock5b-rk3588:~# v4l2-compliance -d /dev/video0
> > v4l2-compliance 1.27.0-5220, 64 bits, 64-bit time_t
> > v4l2-compliance SHA: 8387e3673837 2024-07-01 11:09:32
> > 
> > Compliance test for snps_hdmirx device /dev/video0:
> > 
> > Driver Info:
> > 	Driver name      : snps_hdmirx
> > 	Card type        : snps_hdmirx
> > 	Bus info         : platform:fdee0000.hdmi-receiver
> > 	Driver version   : 6.10.0
> > 	Capabilities     : 0x84201000
> > 		Video Capture Multiplanar
> > 		Streaming
> > 		Extended Pix Format
> > 		Device Capabilities
> > 	Device Caps      : 0x04201000
> > 		Video Capture Multiplanar
> > 		Streaming
> > 		Extended Pix Format
> > 
> > Required ioctls:
> > 	test VIDIOC_QUERYCAP: OK
> > 	test invalid ioctls: OK
> > 
> > Allow for multiple opens:
> > 	test second /dev/video0 open: OK
> > 	test VIDIOC_QUERYCAP: OK
> > 	test VIDIOC_G/S_PRIORITY: OK
> > 	test for unlimited opens: OK
> > 
> > Debug ioctls:
> > 	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > 	test VIDIOC_LOG_STATUS: OK
> > 
> > Input ioctls:
> > 	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > 	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > 	test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > 	test VIDIOC_G/S/ENUMINPUT: OK
> > 	test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > 	Inputs: 1 Audio Inputs: 0 Tuners: 0
> > 
> > Output ioctls:
> > 	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > 	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > 	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > 	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > 	Outputs: 0 Audio Outputs: 0 Modulators: 0
> > 
> > Input/Output configuration ioctls:
> > 	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > 	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
> > 	test VIDIOC_DV_TIMINGS_CAP: OK
> > 	test VIDIOC_G/S_EDID: OK
> > 
> > Control ioctls (Input 0):
> > 	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > 	test VIDIOC_QUERYCTRL: OK
> > 	test VIDIOC_G/S_CTRL: OK
> > 	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > 	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > 	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > 	Standard Controls: 3 Private Controls: 0
> > 
> > Format ioctls (Input 0):
> > 	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > 	test VIDIOC_G/S_PARM: OK
> > 	test VIDIOC_G_FBUF: OK (Not Supported)
> > 	test VIDIOC_G_FMT: OK
> > 	test VIDIOC_TRY_FMT: OK
> > 	test VIDIOC_S_FMT: OK
> > 	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > 	test Cropping: OK (Not Supported)
> > 	test Composing: OK (Not Supported)
> > 	test Scaling: OK (Not Supported)
> > 
> > Codec ioctls (Input 0):
> > 	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > 	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > 	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > 
> > Buffer ioctls (Input 0):
> > 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > 	test CREATE_BUFS maximum buffers: OK
> > 	test VIDIOC_REMOVE_BUFS: OK
> > 	test VIDIOC_EXPBUF: OK
> > 	test Requests: OK (Not Supported)
> > 
> > Total for snps_hdmirx device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0
> > 
> > Changes in v4 :-
> >    - Remove DTS changes included in the device tree patch
> >    - Remove the hdmi rx pin info as it's already present
> >      in the rk3588-base-pinctrl.dtsi
> >    - Create a separate config option for selecting the EDID
> >      and enable it by default
> >    - Improve the comment related to DV timings and move it
> >      to the side of hdmirx_get_detected_timings
> >    - Add 100ms delay before pulling the HPD high
> >    - Do not return the detected timings from VIDIOC_G_DV_TIMINGS
> >    - Drop the bus info from hdmirx_querycap
> >    - If *num_planes != 0 then return 0 in hdmirx_queue_setup
> >    - Set queue->min_queued_buffers to 1
> >    - Drop q->allow_cache_hints = 0; as it's always 0 by default
> >    - Add a comment for q->dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
> >    - Drop .read = vb2_fop_read as it's not supported by driver
> >    - Remove redundant edid_init_data_600M
> >    - Make HPD low when driver is loaded
> >    - Add support for reading AVI Infoframe
> >    - Remove msg_len checks from hdmirx_cec_transmit
> >    - Add info about the CEC compliance test in the cover letter
> >    - Add arbitration lost status
> >    - Validate the physical address inside the EDID
> > 
> > Changes in v3 :-
> >    - Use v4l2-common helpers in the HDMIRX driver
> >    - Rename cma node and phandle names
> >    - Elaborate the comment to explain 160MiB calculation
> >    - Move &hdmi_receiver_cma to the rock5b dts file
> >    - Add information about interlaced video testing in the
> >      cover-letter
> > 
> > Changes in v2 :-
> >    - Fix checkpatch --strict warnings
> >    - Move the dt-binding include file changes in a separate patch
> >    - Add a description for the hardware in the dt-bindings file
> >    - Rename resets, vo1 grf and HPD properties
> >    - Add a proper description for grf and vo1-grf phandles in the
> >      bindings
> >    - Rename the HDMI RX node name to hdmi-receiver
> >    - Include gpio header file in binding example to fix the
> >      dt_binding_check failure
> >    - Move hdmirx_cma node to the rk3588.dtsi file
> >    - Add an entry to MAINTAINERS file for the HDMIRX driver
> > 
> > Shreeya Patel (4):
> >    MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver
> >    dt-bindings: media: Document bindings for HDMI RX Controller
> >    arm64: dts: rockchip: Add device tree support for HDMI RX Controller
> >    media: platform: synopsys: Add support for hdmi input driver
> > 
> >   .../bindings/media/snps,dw-hdmi-rx.yaml       |  132 +
> >   MAINTAINERS                                   |    8 +
> >   .../dts/rockchip/rk3588-base-pinctrl.dtsi     |   14 +
> >   .../arm64/boot/dts/rockchip/rk3588-extra.dtsi |   56 +
> >   drivers/media/platform/Kconfig                |    1 +
> >   drivers/media/platform/Makefile               |    1 +
> >   drivers/media/platform/synopsys/Kconfig       |    3 +
> >   drivers/media/platform/synopsys/Makefile      |    2 +
> >   .../media/platform/synopsys/hdmirx/Kconfig    |   27 +
> >   .../media/platform/synopsys/hdmirx/Makefile   |    4 +
> >   .../platform/synopsys/hdmirx/snps_hdmirx.c    | 2763 +++++++++++++++++
> >   .../platform/synopsys/hdmirx/snps_hdmirx.h    |  394 +++
> >   .../synopsys/hdmirx/snps_hdmirx_cec.c         |  285 ++
> >   .../synopsys/hdmirx/snps_hdmirx_cec.h         |   44 +
> >   14 files changed, 3734 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> >   create mode 100644 drivers/media/platform/synopsys/Kconfig
> >   create mode 100644 drivers/media/platform/synopsys/Makefile
> >   create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
> >   create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
> >   create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
> >   create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
> >   create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
> >   create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h
> > 
> 






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux