Anaconda Development (Date Index)

• Thread Index

• [PATCH 8/8] use isSparc not isSPARC
  • From: Dennis Gilmore
• [PATCH] clean up sparc boot loader so that it writes out and links into /etc correctly
  • From: Dennis Gilmore
• Re: [PATCH 9/9] if we are using a serial console for install then append console=ttyS0, 9600 so upstart will create us a serial console on install
  • From: Dennis Gilmore
• Re: [PATCH 8/9] clean up sparc boot loader so that it writes out and links into /etc correctly
  • From: Dennis Gilmore
• Re: [PATCH 5/9] set the bootloader to silo for sparc installs
  • From: Chris Lumens
• Re: [PATCH 9/9] if we are using a serial console for install then append console=ttyS0, 9600 so upstart will create us a serial console on install
  • From: Chris Lumens
• Re: [PATCH 8/9] clean up sparc boot loader so that it writes out and links into /etc correctly
  • From: Chris Lumens
• Re: [PATCH 4/9] make sure sparc64 has lib64 paths set
  • From: Chris Lumens
• Re: [PATCH] On live installs, the syslog is /var/log/dmesg. (#568814).
  • From: clumens
• [PATCH] On live installs, the syslog is /var/log/dmesg. (#568814).
  • From: Chris Lumens
• Re: [PATCH] The justConfigFile parameter doesn't do anything on x86, either (#568567).
  • From: David Lehman
• Re: [PATCH 1/2] Ignore probably-spurious disklabels on unpartitionable devices. (#567832)
  • From: David Lehman
• Re: [PATCH 1/2] Ignore probably-spurious disklabels on unpartitionable devices. (#567832)
  • From: Hans de Goede
• Re: [PATCH 1/2] Ignore probably-spurious disklabels on unpartitionable devices. (#567832)
  • From: Chris Lumens
• [PATCH 1/2] Ignore probably-spurious disklabels on unpartitionable devices. (#567832)
  • From: David Lehman
• [PATCH 2/2] Set up udev environment so anaconda's udev rules run in livecd. (#568460)
  • From: David Lehman
• [PATCH] The justConfigFile parameter doesn't do anything on x86, either (#568567).
  • From: Chris Lumens
• Re: [PATCH 1/9] amke sure we include sparc boot configs
  • From: Dennis Gilmore
• Re: [PATCH 1/9] amke sure we include sparc boot configs
  • From: Jon Masters
• Re: [PATCH 1/9] amke sure we include sparc boot configs
  • From: Dennis Gilmore
• Re: [PATCH 1/9] amke sure we include sparc boot configs
  • From: Jon Masters
• [PATCH 6/9] add function to get the sparc system type
  • From: Dennis Gilmore
• [PATCH 8/9] clean up sparc boot loader so that it writes out and links into /etc correctly
  • From: Dennis Gilmore
• [PATCH 5/9] set the bootloader to silo for sparc installs
  • From: Dennis Gilmore
• [PATCH 2/9] we make a install.img file not a stage2.img make sure boot.iso is passed the right image to get an iso out
  • From: Dennis Gilmore
• [PATCH 3/9] make sure that sparc boodisk Makefile is made
  • From: Dennis Gilmore
• [PATCH 1/9] amke sure we include sparc boot configs
  • From: Dennis Gilmore
• [PATCH 4/9] make sure sparc64 has lib64 paths set
  • From: Dennis Gilmore
• [PATCH 7/9] use isSparc not isSPARC
  • From: Dennis Gilmore
• [PATCH 9/9] if we are using a serial console for install then append console=ttyS0, 9600 so upstart will create us a serial console on install
  • From: Dennis Gilmore
• [lorax] Create the libdir in the initrd tree
  • From: Martin Gracik
• Re: [PATCH] Check for the real device-mapper nodes in /proc/swaps. (#567840)
  • From: Jesse Keating
• [lorax] Improve the error messages in SmartCopy
  • From: Martin Gracik
• Re: [PATCH 1/2] Skip the filter/cleardisk steps on upgrades, too (#568334).
  • From: David Lehman
• Re: [PATCH] devkit-disks has been replaced with udisks
  • From: Jesse Keating
• [lorax] Fix the regexp for matching the ld_linux executable.
  • From: Martin Gracik
• [lorax] Fix searching for ld_linux executable on 64 bit machines
  • From: Martin Gracik
• [PATCH] Check for the real device-mapper nodes in /proc/swaps. (#567840)
  • From: David Lehman
• [PATCH] Check for the real device-mapper nodes in /proc/swaps. (#567840)
  • From: David Lehman
• Re: [PATCH] devkit-disks has been replaced with udisks
  • From: Bill Nottingham
• Re: [master] It's necessary to give each vfprintf invocation a frash va_list (#568235)
  • From: Chris Lumens
• [lorax] Changed the regexpt to match kernel files containing "_"
  • From: Martin Gracik
• Re: [PATCH] devkit-disks has been replaced with udisks
  • From: Chris Lumens
• [PATCH] devkit-disks has been replaced with udisks
  • From: Jesse Keating
• [PATCH 2/2] doReIPL should return when going back through steps, too (#563862).
  • From: Chris Lumens
• [PATCH 1/2] Skip the filter/cleardisk steps on upgrades, too (#568334).
  • From: Chris Lumens
• [lorax] Make sure we always have the images-xen section for x86.
  • From: Martin Gracik
• [master] fix: Tackle race condition issues during X startup.
  • From: Ales Kozumplik
• signalling problems during X/wm startup
  • From: Ales Kozumplik
• Re: [rhel6-branch] add images-xen section to .treeinfo
  • From: David Cantrell
• Re: [rhel6-branch] add images-xen section to .treeinfo
  • From: Martin Gracik
• [master] It's necessary to give each vfprintf invocation a frash va_list (#568235)
  • From: Ales Kozumplik
• [lorax] Make sure we have at least one kernel
  • From: Martin Gracik
• Re: [PATCH] rpm doesn't always give the callback a tuple (#567878).
  • From: David Cantrell
• Re: [PATCH] Don't unconditionally unskip the partition step on failure (#567889).
  • From: David Cantrell
• [PATCH] rpm doesn't always give the callback a tuple (#567878).
  • From: Chris Lumens
• [PATCH] Don't unconditionally unskip the partition step on failure (#567889).
  • From: Chris Lumens
• [PATCH 2/2] Add [images-xen] block to .treeinfo (#559347).
  • From: David Cantrell
• [PATCH 1/2] Revert "There is no kernel-PAE package anymore, use kernel for xen (#559347)."
  • From: David Cantrell
• [rhel6-branch] add images-xen section to .treeinfo
  • From: David Cantrell
• [Lorax] Check if the anaconda stub file exists before we try to copy it
  • From: Martin Gracik
• Re: [master] fix: do not initialize the install interface whenever is is accessed (#565872)
  • From: Chris Lumens
• [Lorax] Remove the check if the output directory exists when starting lorax.
  • From: Martin Gracik
• Re: 2 commits - scripts/mk-images
  • From: Jesse Keating
• hi
  • From: Frieda Braz
• [Lorax] Don't print the template filename and line number in error messages.
  • From: Martin Gracik
• Re: mdadm created raid 10 set problem in anaconda 13.x
  • From: Clyde E. Kunkel
• Re: [PATCH 1/2] No longer remove persistent udev rules files (#566948).
  • From: David Lehman
• [PATCH 2/2] Revert "Add back hald for Xorg input device queries (#553780)"
  • From: Chris Lumens
• [PATCH 1/2] No longer remove persistent udev rules files (#566948).
  • From: Chris Lumens
• Re: How to control module loading at boot time during installation of linux on POWER?
  • From: Jon Masters
• Re: [master 1/2] Make loader log into syslog (so remote logging works for it as well) (#524980)
  • From: Chris Lumens
• Lorax (buildinstall rewrite)
  • From: Martin Gracik
• [master 2/2] logging: make loader say 'loader' (#563009).
  • From: Ales Kozumplik
• [master 1/2] Make loader log into syslog (so remote logging works for it as well) (#524980)
  • From: Ales Kozumplik
• Re: [PATCH 3/4] Replace calls to isys.getDasdPorts() with calls to new getDasdPorts()
  • From: David Cantrell
• Re: [PATCH] DiskLabel.status can't be determined so return False. (#563526, #561074)
  • From: David Cantrell
• [PATCH] DiskLabel.status can't be determined so return False. (#563526, #561074)
  • From: David Lehman
• Re: [PATCH] Fix creation of encrypted md members and pvs in kickstart. (#567396)
  • From: Chris Lumens
• [PATCH] Fix creation of encrypted md members and pvs in kickstart. (#567396)
  • From: David Lehman
• Re: [PATCH] Fix creation of encrypted md members and pvs in kickstart. (#567396)
  • From: Chris Lumens
• [PATCH] Fix creation of encrypted md members and pvs in kickstart. (#567396)
  • From: David Lehman
• Re: [master] bug 565692
  • From: Hans de Goede
• [PATCH 1/2] Align extended partitions like we do other partitions.
  • From: David Lehman
• [PATCH 2/2] Don't align free space geometries in getFreeRegions. (#565692)
  • From: David Lehman
• [master] bug 565692
  • From: David Lehman
• Re: [PATCH 1/2] Reset the resolver cache after bringing up the network (#562209).
  • From: Chris Lumens
• [master] fix: do not initialize the install interface whenever is is accessed (#565872)
  • From: Ales Kozumplik
• Re: nm-c-e integration take II - now with metacity! [PATCH 8/7 added]
  • From: Radek Vykydal
• Re: [master] Let's have /etc/xorg.conf.d in stage2 (#566396)
  • From: Hans de Goede
• Re: [PATCH 7/7] Keep default metacity schema generated for gconf.
  • From: Ales Kozumplik
• [rhel6-branch 2/2] metacity, fix a displaying problem with WaitWindow and ProgressWindow (#520146)
  • From: Ales Kozumplik
• [rhel6-branch 1/2] Nuke addFrame()'s showtitle parameter (#520146).
  • From: Ales Kozumplik
• [master] Let's have /etc/xorg.conf.d in stage2 (#566396)
  • From: Ales Kozumplik
• How to control module loading at boot time during installation of linux on POWER?
  • From: Ryan Wang
• Re: [PATCH 1/2] Reset the resolver cache after bringing up the network (#562209).
  • From: Ales Kozumplik
• Re: [PATCH 3/4] Replace calls to isys.getDasdPorts() with calls to new getDasdPorts()
  • From: Steffen Maier
• Re: [PATCH 2/4] Add getDasdPorts() to storage/dasd.py.
  • From: Steffen Maier
• Re: [PATCH 4/4] Remove getDasdDevPort() and getDasdState() from isys.py.
  • From: Steffen Maier
• Re: [PATCH 1/4] Remove isys/dasd.c, functions no longer needed in isys.
  • From: Steffen Maier
• [PATCH 1/2] Reset the resolver cache after bringing up the network (#562209).
  • From: Chris Lumens
• [PATCH 2/2] Remove a couple redundant network bring up calls.
  • From: Chris Lumens
• [PATCH 1/4] Remove isys/dasd.c, functions no longer needed in isys.
  • From: David Cantrell
• [PATCH 2/4] Add getDasdPorts() to storage/dasd.py.
  • From: David Cantrell
• [PATCH 3/4] Replace calls to isys.getDasdPorts() with calls to new getDasdPorts()
  • From: David Cantrell
• [master] dasd function housekeeping
  • From: David Cantrell
• [PATCH 4/4] Remove getDasdDevPort() and getDasdState() from isys.py.
  • From: David Cantrell
• Re: [PATCH] Allow --ignoremissing to work for @base and @core (#566752).
  • From: David Cantrell
• Re: [PATCH master] - adapt python-meh and anaconda to using report
  • From: David Cantrell
• Re: [PATCH] Don't traceback when a user tries to put /boot on an LV (#566569)
  • From: Chris Lumens
• [PATCH] Allow --ignoremissing to work for @base and @core (#566752).
  • From: Chris Lumens
• [PATCH 4/5] filer.py is now completely taken over by meh.
  • From: Chris Lumens
• [PATCH 2/5] Remove unused UI code now that report handles all this for me.
  • From: Chris Lumens
• [PATCH 5/5] And add a requirement for report as well.
  • From: Chris Lumens
• [PATCH 3/5] Everything from savers.py has moved into report.
  • From: Chris Lumens
• [PATCH 3/3] Include the report module and related support files (#562656).
  • From: Chris Lumens
• [PATCH 1/3] Adapt to using report's UI API (#562656).
  • From: Chris Lumens
• [PATCH 1/5] Switch ExceptionHandler to use report (#562656).
  • From: Chris Lumens
• [PATCH 2/3] report handles exn saving now, and doesn't require a Filer (#562656).
  • From: Chris Lumens
• [PATCH master] - adapt python-meh and anaconda to using report
  • From: Chris Lumens
• Re: nm-c-e integration take II - now with metacity!
  • From: Radek Vykydal
• [PATCH 3/7] Connect nm-connection-editor to network config button.
  • From: Radek Vykydal
• [PATCH 7/7] Keep default metacity schema generated for gconf.
  • From: Radek Vykydal
• [PATCH 1/7] Add nm-connection-editor to stage2.
  • From: Radek Vykydal
• [PATCH 6/7] Remove gui code we no longer need when mini-wm is gone (#520146)
  • From: Radek Vykydal
• [PATCH 4/7] Introduces metacity window manager (#520146)
  • From: Radek Vykydal
• [PATCH 5/7] Remove mini-wm.c. (#520146)
  • From: Radek Vykydal
• [PATCH 2/7] Add "Configure Network" button to network UI screen.
  • From: Radek Vykydal
• nm-c-e integration take II - now with metacity!
  • From: Radek Vykydal
• Re: metacity, take three
  • From: Ales Kozumplik
• Re: [rhel6-branch 3/3] Remove gui code we no longer need when mini-wm is gone (#520146)
  • From: Ales Kozumplik
• Re: metacity, take three
  • From: Radek Vykydal
• Re: anaconda [parted] always overwrites the first and last 9k of a disk
  • From: Jon Masters
• [PATCH] Don't traceback when a user tries to put /boot on an LV (#566569)
  • From: Hans de Goede
• Re: [rhel6-branch 3/3] Remove gui code we no longer need when mini-wm is gone (#520146)
  • From: Chris Lumens
• Re: metacity, take three
  • From: Chris Lumens
• Re: metacity, take three
  • From: Hans de Goede
• [rhel6-branch 3/3] Remove gui code we no longer need when mini-wm is gone (#520146)
  • From: Ales Kozumplik
• [rhel6-branch 2/3] Remove mini-wm.c. (#520146)
  • From: Ales Kozumplik
• [rhel6-branch 1/3] Introduces metacity window manager (#520146)
  • From: Ales Kozumplik
• metacity, take three
  • From: Ales Kozumplik
• Re: anaconda [parted] always overwrites the first and last 9k of a disk
  • From: Hans de Goede
• Re: anaconda [parted] always overwrites the first and last 9k of a disk
  • From: Eric Sandeen
• Re: [PATCH] Add device node names to the filter UI, hidden by default (#566375).
  • From: Hans de Goede
• [PATCH] Add device node names to the filter UI, hidden by default (#566375).
  • From: Chris Lumens
• anaconda [parted] always overwrites the first and last 9k of a disk
  • From: Hans de Goede
• [PATCH] RescueInterface should inherit from InstallInterfaceBase too
  • From: Hans de Goede
• Re: [PATCH] RescueInterface should inherit from InstallInterfaceBase too
  • From: Hans de Goede
• Re: [PATCH] RescueInterface should inherit from InstallInterfaceBase too
  • From: Chris Lumens
• [master] Improve reboot modes in init.c and shutdown.c.
  • From: 4B682347 . 6040100
• [PATCH] RescueInterface should inherit from InstallInterfaceBase too
  • From: Hans de Goede
• Re: [master 5/6] logging: introduce stderr logger and use it for critical situations in kickstart.py.
  • From: Hans de Goede
• Re: [master 2/6] logging, fix: setting remote logging from kicstart
  • From: Hans de Goede
• Re: [master 2/6] logging, fix: setting remote logging from kicstart
  • From: Ales Kozumplik
• Re: [master 5/6] logging: introduce stderr logger and use it for critical situations in kickstart.py.
  • From: Ales Kozumplik
• Re: [master 6/6] logging: initialize tty3 logging in anaconda_log, along with all other basic loggers.
  • From: Hans de Goede
• Re: [master 5/6] logging: introduce stderr logger and use it for critical situations in kickstart.py.
  • From: Hans de Goede
• Re: [master 4/6] logging: Loggers live a cosmopolitan life, forget about them after created.
  • From: Hans de Goede
• Re: [master 3/6] logging: remove AnacondaLog's unused default parameter.
  • From: Hans de Goede
• Re: [master 2/6] logging, fix: setting remote logging from kicstart
  • From: Hans de Goede
• Re: [master 1/6] logging: addFileHandler does not set autoLevel by default
  • From: Hans de Goede
• Re: [PATCH 1/2] Put back the deepcopy of the device stack in ActionDestroyFormat.
  • From: David Lehman
• Re: [PATCH] cosmetic: tell them we expect NFSv3 path in loader (#560101).
  • From: Chris Lumens
• Re: [PATCH] Warn when ignoring BIOS RAID members (#560932)
  • From: Chris Lumens
• Re: [PATCH] Run Xorg with -nr option, so we have less flicker (ajax)
  • From: Chris Lumens
• [master 5/6] logging: introduce stderr logger and use it for critical situations in kickstart.py.
  • From: Ales Kozumplik
• [master 4/6] logging: Loggers live a cosmopolitan life, forget about them after created.
  • From: Ales Kozumplik
• [master 2/6] logging, fix: setting remote logging from kicstart
  • From: Ales Kozumplik
• [master 6/6] logging: initialize tty3 logging in anaconda_log, along with all other basic loggers.
  • From: Ales Kozumplik
• [master 3/6] logging: remove AnacondaLog's unused default parameter.
  • From: Ales Kozumplik
• [master 1/6] logging: addFileHandler does not set autoLevel by default
  • From: Ales Kozumplik
• [PATCH] Run Xorg with -nr option, so we have less flicker (ajax)
  • From: Martin Gracik
• Re: metacity (a winning window manager, take two)
  • From: Bill Nottingham
• Re: [PATCH] Introduces metacity window manager (needed for #520146)
  • From: Hans de Goede
• Re: [PATCH] Introduces metacity window manager (needed for #520146)
  • From: Hans de Goede
• Re: metacity (a winning window manager, take two)
  • From: Jesse Keating
• Re: [PATCH] Introduces metacity window manager (needed for #520146)
  • From: Ales Kozumplik
• Re: metacity (a winning window manager, take two)
  • From: Bill Nottingham
• Re: metacity (a winning window manager, take two)
  • From: Chris Lumens
• Re: metacity (a winning window manager, take two)
  • From: Chris Lumens
• Re: [PATCH] Introduces metacity window manager (needed for #520146)
  • From: Chris Lumens
• Re: [PATCH] Warn when ignoring BIOS RAID members (#560932)
  • From: Hans de Goede
• Re: [PATCH] Warn when ignoring BIOS RAID members (#560932)
  • From: Chris Lumens
• Re: [PATCH] Only check that extended's start sector is within the chunk. (#565692)
  • From: Hans de Goede
• Re: [PATCH rhel6-branch] Fix hiding the advanced button on the filter UI (#555769, #565425).
  • From: Hans de Goede
• [PATCH rhel6-branch] Fix hiding the advanced button on the filter UI (#555769, #565425).
  • From: Chris Lumens
• Re: metacity (a winning window manager, take two)
  • From: Jesse Keating
• [PATCH] Only check that extended's start sector is within the chunk. (#565692)
  • From: David Lehman
• [master][rhel6-branch] patch for 560908 (rhel) and 565692 (fedora)
  • From: David Lehman
• Re: [PATCH] Require a format to have a mountpoint before testing for RO (#565879).
  • From: Ales Kozumplik
• [PATCH] Require a format to have a mountpoint before testing for RO (#565879).
  • From: Chris Lumens
• Re: [PATCH 5/6] Show the correct device path when formatting as swap or luks.
  • From: David Cantrell
• Re: [PATCH 6/6] Use the LUKS UUID, not the filesystem UUID for dracut. (#561373)
  • From: David Cantrell
• Re: [PATCH] Add currentSize method to the PartitionDevice class (#565822)
  • From: David Cantrell
• Re: [PATCH] Introduces metacity window manager (needed for #520146)
  • From: Hans de Goede
• Re: [PATCH] Introduces metacity window manager (needed for #520146)
  • From: Ales Kozumplik
• Re: [PATCH] Introduces metacity window manager (needed for #520146)
  • From: Hans de Goede
• Re: [PATCH] Fix instData removal mis merge
  • From: Chris Lumens
• [PATCH] Add currentSize method to the PartitionDevice class (#565822)
  • From: Hans de Goede
• [PATCH] Fix instData removal mis merge
  • From: Hans de Goede
• Re: [PATCH] cosmetic: tell them we expect NFSv3 path in loader (#560101).
  • From: Hans de Goede
• Re: [PATCH] Warn when ignoring BIOS RAID members (#560932)
  • From: Hans de Goede
• [PATCH] cosmetic: tell them we expect NFSv3 path in loader (#560101).
  • From: Ales Kozumplik
• Re: [PATCH 1/2] Put back the deepcopy of the device stack in ActionDestroyFormat.
  • From: Hans de Goede
• Re: [PATCH 1/2] Fix traceback in filter_gui.py when dealing with RAID10 BIOSRAID (#565444)
  • From: Ales Kozumplik
• Re: [PATCH] Warn when ignoring BIOS RAID members (#560932)
  • From: Ales Kozumplik
• Re: [PATCH 2/2] Intel BIOS RAID array not recognized (#565458)
  • From: Ales Kozumplik
• Re: [firstboot] Fix firstboot for s390 architecture
  • From: Martin Gracik
• Re: [PATCH 3/6] Log only the disks' names in PartitionDevice._setDisk.
  • From: Hans de Goede
• Re: [rhel5-branch] Cut the size of the boot.img for ia64 in half (#556976).
  • From: Ales Kozumplik
• Re: [PATCH 3/6] Log only the disks' names in PartitionDevice._setDisk.
  • From: David Lehman
• [PATCH 4/6] Fix ordering of arguments to xfs_admin for writing fs label. (#556546)
  • From: David Lehman
• [PATCH 5/6] Show the correct device path when formatting as swap or luks.
  • From: David Lehman
• [PATCH 6/6] Use the LUKS UUID, not the filesystem UUID for dracut. (#561373)
  • From: David Lehman
• [PATCH 3/6] Log only the disks' names in PartitionDevice._setDisk.
  • From: David Lehman
• Re: [PATCH 1/2] Put back the deepcopy of the device stack in ActionDestroyFormat.
  • From: David Lehman
• Re: [PATCH 1/2] Add the .libs directories to PYTHONPATH so pychecker works again.
  • From: Chris Lumens
• Re: [f12-branch] Patches cherry-pick, libfreebl3.so/libsoftokn3.so
  • From: Chris Lumens
• Re: [firstboot] Fix firstboot for s390 architecture
  • From: Chris Lumens
• Re: [PATCH 1/2] Add the .libs directories to PYTHONPATH so pychecker works again.
  • From: Hans de Goede
• Re: [rhel5-branch] Cut the size of the boot.img for ia64 in half (#556976).
  • From: Chris Lumens
• [PATCH 1/2] Add the .libs directories to PYTHONPATH so pychecker works again.
  • From: Chris Lumens
• [PATCH 2/2] Fix a handful of simple pychecker errors.
  • From: Chris Lumens
• [PATCH] Introduces metacity window manager (needed for #520146)
  • From: Ales Kozumplik
• metacity (a winning window manager, take two)
  • From: Ales Kozumplik
• [rhel5-branch] Cut the size of the boot.img for ia64 in half (#556976).
  • From: Ales Kozumplik
• Cut the size of the boot.img for ia64 in half, take two
  • From: Ales Kozumplik
• Re: [PATCH 1/2] Fix traceback in filter_gui.py when dealing with RAID10 BIOSRAID (#565444)
  • From: Chris Lumens
• [PATCH] Warn when ignoring BIOS RAID members (#560932)
  • From: Hans de Goede
• [PATCH 1/2] Fix traceback in filter_gui.py when dealing with RAID10 BIOSRAID (#565444)
  • From: Hans de Goede
• [PATCH 2/2] Intel BIOS RAID array not recognized (#565458)
  • From: Hans de Goede
• Re: [PATCH] Find rsyslog libs in $LIBDIR not /usr/$LIBDIR
  • From: Jesse Keating
• Re: [PATCH 2/2] Remove newly added partition from disk if subsequent commit fails. (#559907)
  • From: Hans de Goede
• Re: [PATCH 1/2] Put back the deepcopy of the device stack in ActionDestroyFormat.
  • From: Hans de Goede
• [PATCH 1/2] Put back the deepcopy of the device stack in ActionDestroyFormat.
  • From: David Lehman
• [PATCH 2/2] Remove newly added partition from disk if subsequent commit fails. (#559907)
  • From: David Lehman
• Re: [PATCH] Don't reset the default package selection on text installs (#564103).
  • From: Ales Kozumplik
• Re: [PATCH] Find rsyslog libs in $LIBDIR not /usr/$LIBDIR
  • From: Ales Kozumplik
• [PATCH] Don't reset the default package selection on text installs (#564103).
  • From: Chris Lumens
• Re: matchbox window manager
  • From: Ales Kozumplik
• Re: matchbox window manager
  • From: Chris Lumens
• Re: [PATCH] Find rsyslog libs in $LIBDIR not /usr/$LIBDIR
  • From: Chris Lumens
• [firstboot] Fix firstboot for s390 architecture
  • From: Martin Gracik
• Re: [PATCH] Don't traceback during kickstart if no ignoredisk line is given (#563581).
  • From: Hans de Goede
• Re: [PATCH 1/4] Pass '--force' to vgremove to avoid interactive prompts. (#563873)
  • From: Hans de Goede
• Re: matchbox window manager
  • From: Hans de Goede
• Re: [PATCH 1/4] Pass '--force' to vgremove to avoid interactive prompts. (#563873)
  • From: Ales Kozumplik
• [PATCH] Find rsyslog libs in $LIBDIR not /usr/$LIBDIR
  • From: Jesse Keating
• [PATCH 3/4] Raise default lvm extent size from 4MB to 32MB.
  • From: David Lehman
• [PATCH 4/4] Remove rules handled by the device-mapper package's rules.
  • From: David Lehman
• [PATCH 2/4] Add udev_settle after setup of LUKSDevice. (#534043)
  • From: David Lehman
• [PATCH 1/4] Pass '--force' to vgremove to avoid interactive prompts. (#563873)
  • From: David Lehman
• Re: [PATCH 4/5] Wait for all DASDs to be online after autodetection (#558881).
  • From: Steffen Maier
• Re: [PATCH 5/5] Use /sys/devices/lcs instead of /sys/devices/cu3088 (#561816).
  • From: David Cantrell
• Re: [PATCH 1/5] Write ARP=yes to ifcfg file when VSWITCH=1 is set on s390x (#561926).
  • From: David Cantrell
• Re: [PATCH 5/5] Use /sys/devices/lcs instead of /sys/devices/cu3088 (#561816).
  • From: Steffen Maier
• Re: [PATCH 1/5] Write ARP=yes to ifcfg file when VSWITCH=1 is set on s390x (#561926).
  • From: Steffen Maier
• Re: [PATCH] Use lsznet.raw from s390utils package (#563548).
  • From: Steffen Maier
• Re: [PATCH 2/5] Set initrd load address to 32MB for s390x (#546422).
  • From: David Cantrell
• [master] & [rhel6-branch] use lsznet from s390utils
  • From: David Cantrell
• [PATCH] Use lsznet.raw from s390utils package (#563548).
  • From: David Cantrell
• Re: [firstboot] Fix firstboot for s390 architecture
  • From: David Cantrell
• [PATCH] Don't traceback during kickstart if no ignoredisk line is given (#563581).
  • From: Chris Lumens
• Re: [PATCH 2/5] Set initrd load address to 32MB for s390x (#546422).
  • From: Steffen Maier
• Re: matchbox window manager
  • From: Bill Nottingham
• Re: matchbox window manager
  • From: Ales Kozumplik
• Re: matchbox window manager
  • From: Bill Nottingham
• [PATCH] Introduces matchbox window manager (needed for #520146)
  • From: Ales Kozumplik
• matchbox window manager
  • From: Ales Kozumplik
• [firstboot] Fix firstboot for s390 architecture
  • From: Martin Gracik
• Re: [PATCH 5/5] Use /sys/devices/lcs instead of /sys/devices/cu3088 (#561816).
  • From: Hans de Goede
• Re: [PATCH 4/5] Wait for all DASDs to be online after autodetection (#558881).
  • From: Hans de Goede
• Re: [PATCH 3/5] Prompt user for install method when going back to STEP_METHOD.
  • From: Ales Kozumplik
• Re: [PATCH 2/5] Set initrd load address to 32MB for s390x (#546422).
  • From: Ales Kozumplik
• Re: [PATCH 1/5] Write ARP=yes to ifcfg file when VSWITCH=1 is set on s390x (#561926).
  • From: Ales Kozumplik
• [PATCH 1/5] Write ARP=yes to ifcfg file when VSWITCH=1 is set on s390x (#561926).
  • From: David Cantrell
• [PATCH 2/5] Set initrd load address to 32MB for s390x (#546422).
  • From: David Cantrell
• [master] various s390x patches
  • From: David Cantrell
• [PATCH 4/5] Wait for all DASDs to be online after autodetection (#558881).
  • From: David Cantrell
• [PATCH 5/5] Use /sys/devices/lcs instead of /sys/devices/cu3088 (#561816).
  • From: David Cantrell
• [PATCH 3/5] Prompt user for install method when going back to STEP_METHOD.
  • From: David Cantrell
• [PATCH] Allow any add-on python module to be updated via an updates.img.
  • From: Chris Lumens
• Re: [PATCH] Allow any add-on python module to be updated via an updates.img.
  • From: David Lehman
• [PATCH] Allow any add-on python module to be updated via an updates.img.
  • From: Chris Lumens
• Re: history of buildinstall.functions
  • From: David Cantrell
• Re: making anaconda into a real python module
  • From: Hans de Goede
• Re: [PATCH] Only show the error message if there was an error.
  • From: Hans de Goede
• [PATCH] Only show the error message if there was an error.
  • From: David Lehman
• Re: history of buildinstall.functions
  • From: John Reiser
• making anaconda into a real python module
  • From: Chris Lumens
• Re: history of buildinstall.functions
  • From: Martin Gracik
• Re: [PATCH] Do not override BASEARCH with BUILDARCH, it doesn't make sense (#524235)
  • From: Martin Gracik
• [PATCH] Do not override BASEARCH with BUILDARCH, it doesn't make sense (#524235)
  • From: Martin Sivak
• Re: [rhel5-branch] Cut the size of the boot.img for ia64 in half (#556976).
  • From: Ales Kozumplik
• Re: history of buildinstall.functions
  • From: Hans de Goede
• Re: [PATCH] Be more explicit in which libraries we link with.
  • From: Hans de Goede
• Re: history of buildinstall.functions
  • From: Martin Gracik
• Re: history of buildinstall.functions
  • From: Jeremy Katz
• Re: [rhel5-branch] Cut the size of the boot.img for ia64 in half (#556976).
  • From: Jeremy Katz
• history of buildinstall.functions
  • From: John Reiser
• [PATCH] Be more explicit in which libraries we link with.
  • From: Chris Lumens
• [f12-branch] Patches cherry-pick, libfreebl3.so/libsoftokn3.so
  • From: Jeroen van Meeuwen
• Re: [PATCH] Be even more clear about removing existing linux installations. (#493360)
  • From: Chris Lumens
• Re: [PATCH] Be even more clear about removing existing linux installations. (#493360)
  • From: Hans de Goede
• [PATCH] Be even more clear about removing existing linux installations. (#493360)
  • From: David Lehman
• Re: Appropriate test priority for telnet and cmdline installs
  • From: James Laska
• [rhel5-branch] Cut the size of the boot.img for ia64 in half (#556976).
  • From: akozumpl
• [master] Improve reboot modes in init.c and shutdown.c.
  • From: akozumpl
• Re: [PATCH 1/3] Fix backtrace when trying to use LV for /boot (#562325)
  • From: Martin Sivak
• Re: [PATCH 2/3] Improve platform.checkBootRequest() mdarray handling
  • From: Martin Sivak
• Re: Appropriate test priority for telnet and cmdline installs
  • From: David Cantrell
• Re: Appropriate test priority for telnet and cmdline installs
  • From: Chris Lumens
• Re: [PATCH] Clarify which storage exceptions are bugs (#557928).
  • From: David Lehman
• Re: [PATCH] Add python-devel's gdbinit, which provides useful debugging macros.
  • From: Chris Lumens
• Re: [PATCH 3/3] platform.checkBootRequest(): Fix use of map instead of filter
  • From: Chris Lumens
• [PATCH] Clarify which storage exceptions are bugs (#557928).
  • From: Chris Lumens
• Re: [PATCH] Add lsusb to rescue mode stage2 (#562616)
  • From: Chris Lumens
• Re: [PATCH] Minor style fix (indent "cat" correctly")
  • From: Chris Lumens
• [PATCH 2/3] Improve platform.checkBootRequest() mdarray handling
  • From: Hans de Goede
• [PATCH 1/3] Fix backtrace when trying to use LV for /boot (#562325)
  • From: Hans de Goede
• [PATCH 3/3] platform.checkBootRequest(): Fix use of map instead of filter
  • From: Hans de Goede
• [PATCH] Add lsusb to rescue mode stage2 (#562616)
  • From: Hans de Goede
• Re: [PATCH] Keep the end sector aligned when resizing partitions (#560647)
  • From: Hans de Goede
• Re: [PATCH] time for instdata to die
  • From: David Cantrell
• Re: patches for rawhide
  • From: David Cantrell
• Re: [PATCH] Keep the end sector aligned when resizing partitions (#560647)
  • From: David Cantrell
• [PATCH] Minor style fix (indent "cat" correctly")
  • From: Peter Jones
• [PATCH] Add python-devel's gdbinit, which provides useful debugging macros.
  • From: Peter Jones
• Re: mdadm created raid 10 set problem in anaconda 13.x
  • From: Clyde E. Kunkel
• Re: [PATCH 6/7] Fix splitting of error strings from program.log.
  • From: Hans de Goede
• Re: [PATCH 7/7] Don't return the passphrase from hasKey. Should return a boolean.
  • From: Hans de Goede
• Re: [PATCH 5/7] Take advantage of default size for new partitions.
  • From: Hans de Goede
• Re: [PATCH 4/7] Add a default size of 500MB for new partition requests.
  • From: Hans de Goede
• Re: [PATCH 3/7] Remove check for MD_DEVNAME from udev_device_is_md. (#562024)
  • From: Hans de Goede
• Re: [PATCH 2/7] Don't try to specify bitmap for RAID0 since mdadm doesn't allow it. (#562023)
  • From: Hans de Goede
• Re: [PATCH 1/7] Use 0 for a default max_req_size instead of None.
  • From: Hans de Goede
• Re: mdadm created raid 10 set problem in anaconda 13.x
  • From: David Lehman
• [PATCH 6/7] Fix splitting of error strings from program.log.
  • From: David Lehman
• [PATCH 3/7] Remove check for MD_DEVNAME from udev_device_is_md. (#562024)
  • From: David Lehman
• [PATCH 4/7] Add a default size of 500MB for new partition requests.
  • From: David Lehman
• [PATCH 7/7] Don't return the passphrase from hasKey. Should return a boolean.
  • From: David Lehman
• [PATCH 2/7] Don't try to specify bitmap for RAID0 since mdadm doesn't allow it. (#562023)
  • From: David Lehman
• [PATCH 5/7] Take advantage of default size for new partitions.
  • From: David Lehman
• [PATCH 1/7] Use 0 for a default max_req_size instead of None.
  • From: David Lehman
• patches for rawhide
  • From: David Lehman
• Re: mdadm created raid 10 set problem in anaconda 13.x
  • From: Clyde E. Kunkel
• Re: [PATCH] time for instdata to die
  • From: clumens
• Re: [PATCH] Write ARP=0 to ifcfg file when VSWITCH=1 is set on s390x (#561926).
  • From: David Cantrell
• Re: [PATCH] Write ARP=0 to ifcfg file when VSWITCH=1 is set on s390x (#561926).
  • From: Chris Lumens
• Re: [PATCH] Write ARP=0 to ifcfg file when VSWITCH=1 is set on s390x (#561926).
  • From: Steffen Maier
• Re: [PATCH] time for instdata to die
  • From: Hans de Goede
• [PATCH] Write ARP=0 to ifcfg file when VSWITCH=1 is set on s390x (#561926).
  • From: David Cantrell
• [master] & [rhel6-branch] set ARP=0 for VSWITCH=1 on s390x
  • From: David Cantrell
• Appropriate test priority for telnet and cmdline installs
  • From: James Laska
• Re: [PATCH] time for instdata to die
  • From: Chris Lumens
• Re: [PATCH] Add a method to cmdline.py:InstallInterface to handle missing attrs.
  • From: Ales Kozumplik
• Re: [PATCH] time for instdata to die
  • From: Hans de Goede
• Re: [PATCH] Fix typo in action sorting. Disklabels before partitions. (#560017)
  • From: David Lehman
• Re: [PATCH] Fix typo in action sorting. Disklabels before partitions. (#560017)
  • From: David Cantrell
• [PATCH] Fix typo in action sorting. Disklabels before partitions. (#560017)
  • From: David Lehman
• Re: [PATCH 1/5] Rename the WWID column to Identifier.
  • From: David Lehman
• Re: [PATCH 3/3] Enforce maximum partition sizes. (#528276)
  • From: Chris Lumens
• Re: [PATCH 2/3] Log commands as a string instead of as a list of strings.
  • From: Chris Lumens
• Re: [PATCH 1/3] Strip off the timestamp from error output pulled from program.log.
  • From: Chris Lumens
• [PATCH 1/5] Rename the WWID column to Identifier.
  • From: Chris Lumens
• [PATCH 3/5] Add ID_SERIAL in as a backup in case there's no ID_SERIAL_SHORT.
  • From: Chris Lumens
• [PATCH 4/5] Fix a variety of filtering UI problems caused by switching models around.
  • From: Chris Lumens
• [PATCH 5/5] Display ID_PATH for zFCP devices instead of looking for a WWID.
  • From: Chris Lumens
• [PATCH 2/5] Display ID_PATH instead of WWID for DASDs as well.
  • From: Chris Lumens
• [PATCH 1/3] Strip off the timestamp from error output pulled from program.log.
  • From: David Lehman
• [PATCH 3/3] Enforce maximum partition sizes. (#528276)
  • From: David Lehman
• [PATCH 2/3] Log commands as a string instead of as a list of strings.
  • From: David Lehman
• [PATCH] time for instdata to die
  • From: Chris Lumens
• Re: [master 1/2] Fix: execWithCallback() not logging stderr.
  • From: David Lehman
• [PATCH] Add a method to cmdline.py:InstallInterface to handle missing attrs.
  • From: Chris Lumens
• Re: [master] Improve reboot modes in init.c and shutdown.c.
  • From: Ales Kozumplik
• Re: [PATCH] Fix keymaps-override-ppc pickup in mk-images (#524235)
  • From: Martin Gracik
• [PATCH] Fix keymaps-override-ppc pickup in mk-images (#524235)
  • From: Martin Sivak
• Re: [master 1/2] Fix: execWithCallback() not logging stderr.
  • From: Ales Kozumplik
• Re: [master 1/2] Fix: execWithCallback() not logging stderr.
  • From: Chris Lumens
• Re: [master] Improve reboot modes in init.c and shutdown.c.
  • From: Steffen Maier
• [PATCH] Keep the end sector aligned when resizing partitions (#560647)
  • From: Hans de Goede
• Re: [master 1/2] Fix: execWithCallback() not logging stderr.
  • From: Hans de Goede
• Re: [master 1/2] Fix: execWithCallback() not logging stderr.
  • From: Ales Kozumplik
• Re: [master 1/2] Fix: execWithCallback() not logging stderr.
  • From: Hans de Goede
• [master 2/2] Fix: execWithRedirect() logging stderr at wrong loglevel.
  • From: Ales Kozumplik
• Re: [PATCH] Fix: ArithmeticError: Could not align to closest sector (#561278)
  • From: Ales Kozumplik
• [master 1/2] Fix: execWithCallback() not logging stderr.
  • From: Ales Kozumplik
• Re: [PATCH] Fix: ArithmeticError: Could not align to closest sector (#561278)
  • From: Hans de Goede
• [PATCH] Fix: ArithmeticError: Could not align to closest sector (#561278)
  • From: Hans de Goede
• Re: [PATCH] Fixed parsing of strings with multiple values in pyudev
  • From: Martin Gracik
• Re: [PATCH] Fixed parsing of strings with multiple values in pyudev
  • From: Hans de Goede
• [PATCH] Fixed parsing of strings with multiple values in pyudev
  • From: Martin Gracik
• Re: [PATCH] Fixed parsing of strings with multiple values in pyudev
  • From: Martin Gracik
• Re: [master] Improve reboot modes in init.c and shutdown.c.
  • From: Ales Kozumplik
• Re: [PATCH] Fixed parsing of strings with multiple values in pyudev
  • From: Hans de Goede
• Re: [PATCH] Fixed parsing of strings with multiple values in pyudev
  • From: Martin Gracik
• Re: [PATCH] Fixed parsing of strings with multiple values in pyudev
  • From: Hans de Goede
• [PATCH] Fixed parsing of strings with multiple values in pyudev
  • From: Martin Gracik
• Re: [master] Improve reboot modes in init.c and shutdown.c.
  • From: Steffen Maier
• Re: [PATCH - rhel6-branch master] On text kickstart installs, doBasePackageSelect still needs to run (#559593).
  • From: Hans de Goede
• [PATCH - rhel6-branch master] On text kickstart installs, doBasePackageSelect still needs to run (#559593).
  • From: Chris Lumens
• [master] Improve reboot modes in init.c and shutdown.c.
  • From: Ales Kozumplik
• Re: [master] Improve reboot modes in init.c and shutdown.c.
  • From: Ales Kozumplik
• Re: [PATCH] Remove unused udev_parse_block_entry() function
  • From: Ales Kozumplik
• Re: [PATCH] Startup iscsi / fcoe / zfcp before listing drives in the filter UI
  • From: Martin Sivak
• [PATCH] Remove unused udev_parse_block_entry() function
  • From: Hans de Goede
• Re: [PATCH] Fixed the problem with string to list properties (#560262)
  • From: Hans de Goede
• [PATCH] Fixed the problem with string to list properties (#560262)
  • From: Martin Gracik
• Re: [PATCH] Fixup partition aligning (related #559639)
  • From: David Lehman
• Re: [PATCH] Startup iscsi / fcoe / zfcp before listing drives in the filter UI
  • From: Martin Sivak
• Re: [PATCH] pyudev: explicitly specify all return value and argument types (#559394)
  • From: Martin Sivak
• Re: [PATCH] Fix backtrace when adding mdraid arrays (#560360)
  • From: Martin Sivak
• [PATCH] Fixup partition aligning (related #559639)
  • From: Hans de Goede
• [PATCH] Fix backtrace when adding mdraid arrays (#560360)
  • From: Hans de Goede
• Re: mdadm created raid 10 set problem in anaconda 13.x
  • From: Hans de Goede
• mdadm created raid 10 set problem in anaconda 13.x
  • From: Clyde E. Kunkel
• [PATCH] pyudev: explicitly specify all return value and argument types (#559394)
  • From: Hans de Goede
• Re: [PATCH] Remove /sys prefix in udev_enumerate_devices()
  • From: David Cantrell
• Re: [master] Improve reboot modes in init.c and shutdown.c.
  • From: Steffen Maier
• Re: [PATCH] Correctly add found multipath devices to our dict (#560029).
  • From: Hans de Goede
• Re: [master] Improve reboot modes in init.c and shutdown.c.
  • From: Steffen Maier
• Re: [PATCH] Add missing methods to RescueInterface
  • From: Chris Lumens
• [PATCH] Correctly add found multipath devices to our dict (#560029).
  • From: Chris Lumens
• [PATCH] Add missing methods to RescueInterface
  • From: Peter Jones
• Re: [PATCH 2/4] Skip the filtering UI if there's only one disk in the machine.
  • From: Chris Lumens
• Re: [master 1/2] anaconda, storage and yum: log to tty3 in the same format as we log into tty4
  • From: Hans de Goede
• Re: [master] Improve reboot modes in init.c and shutdown.c.
  • From: Ales Kozumplik
• Re: [master 2/2] rename constants and a variable in anconda_log.py so the names make more sense.
  • From: Hans de Goede
• [master 1/2] anaconda, storage and yum: log to tty3 in the same format as we log into tty4
  • From: Ales Kozumplik
• logging unifications and cleanups
  • From: Ales Kozumplik
• [master 2/2] rename constants and a variable in anconda_log.py so the names make more sense.
  • From: Ales Kozumplik
• Re: [PATCH 1/2] Update =~ regexps in lsznet.raw for bash-4.1 (#558537).
  • From: Steffen Maier
• [master] Improve reboot modes in init.c and shutdown.c.
  • From: Ales Kozumplik
• shutdown improvement
  • From: Ales Kozumplik
• Re: [PATCH] Log system messages to /tmp/syslog instead of /tmp/messages.log.
  • From: Ales Kozumplik
• Re: [PATCH] Remove /sys prefix in udev_enumerate_devices()
  • From: Martin Gracik
• [PATCH] Remove /sys prefix in udev_enumerate_devices()
  • From: Hans de Goede
• Re: [PATCH 2/2] Use libudev's enumerate_devices function (#559394)
  • From: Hans de Goede
• Re: [PATCH 2/2] Use libudev's enumerate_devices function (#559394)
  • From: David Lehman
• Re: [PATCH 2/2] Use libudev's enumerate_devices function (#559394)
  • From: David Cantrell
• Re: [PATCH 2/2] Use libudev's enumerate_devices function (#559394)
  • From: David Lehman
• [PATCH 2/2] Use libudev's enumerate_devices function (#559394)
  • From: David Cantrell
• [rhel6-branch] & [master] two s390x blockers for RHEL-6
  • From: David Cantrell
• [PATCH 1/2] Update =~ regexps in lsznet.raw for bash-4.1 (#558537).
  • From: David Cantrell
• Run serial console installs under "screen"?
  • From: Chris Adams
• Re: [PATCH 3/4] Build sorted models on top of filtered models to make column sorting work.
  • From: Chris Lumens
• [PATCH] Startup iscsi / fcoe / zfcp before listing drives in the filter UI
  • From: Hans de Goede
• Re: [PATCH 1/3] Add pure python EDD code parsing and compareDrives substitute (#478996)
  • From: Chris Lumens
• Re: [PATCH 1/4] Update =~ regexps in linuxrc.s390 for bash-4.1 (#558537).
  • From: David Cantrell
• Re: [PATCH 3/4] Build sorted models on top of filtered models to make column sorting work.
  • From: Hans de Goede
• Re: [PATCH 4/4] gtk.TreeStores are iterable, so use indices instead of iterators.
  • From: Hans de Goede
• Re: [PATCH 2/4] Skip the filtering UI if there's only one disk in the machine.
  • From: Hans de Goede
• Re: [PATCH rhel6-branch master] Include /etc/netconfig in the initrd for NFS (#557704).
  • From: David Cantrell
• Re: [PATCH 1/4] Allow getScreen methods to indicate the screen should be skipped.
  • From: Hans de Goede
• [PATCH rhel6-branch master] Include /etc/netconfig in the initrd for NFS (#557704).
  • From: Chris Lumens
• [PATCH rhel6-branch master] Include /etc/netconfig in the initrd for NFS (#557704).
  • From: Chris Lumens
• Re: [PATCH] Log system messages to /tmp/syslog instead of /tmp/messages.log.
  • From: David Lehman
• [PATCH] Log system messages to /tmp/syslog instead of /tmp/messages.log.
  • From: Chris Lumens
• [PATCH 1/4] Allow getScreen methods to indicate the screen should be skipped.
  • From: Chris Lumens
• Re: [PATCH 1/2] cleardisk_gui: Base autoselection of bootdev on detected BIOS order
  • From: Chris Lumens
• [PATCH 3/4] Build sorted models on top of filtered models to make column sorting work.
  • From: Chris Lumens
• [PATCH] various filtering UI patches
  • From: Chris Lumens
• [PATCH 2/4] Skip the filtering UI if there's only one disk in the machine.
  • From: Chris Lumens
• [PATCH 4/4] gtk.TreeStores are iterable, so use indices instead of iterators.
  • From: Chris Lumens
• [PATCH 3/3] cleardisk_gui: Base autoselection of bootdev on detected BIOS order
  • From: Hans de Goede
• [PATCH 2/3] Hookup new python EDD code (#478996)
  • From: Hans de Goede
• [PATCH 1/3] Add pure python EDD code parsing and compareDrives substitute (#478996)
  • From: Hans de Goede
• Re: [PATCH 1/2] cleardisk_gui: Base autoselection of bootdev on detected BIOS order
  • From: Hans de Goede
• Re: [PATCH 1/4] Add pure python EDD code parsing and compareDrives substitute (#478996)
  • From: Hans de Goede
• Re: [PATCH 1/4] Update =~ regexps in linuxrc.s390 for bash-4.1 (#558537).
  • From: Steffen Maier
• Re: [PATCH 2/4] Add 5 second ping delay for gateway and dns test on s390x (#536815).
  • From: Steffen Maier
• Re: [PATCH 2/4] Hookup new python EDD code (#478996)
  • From: Hans de Goede
• Re: [PATCH 2/4] Hookup new python EDD code (#478996)
  • From: Hans de Goede
• Re: [PATCH 4/4] Make sure we always check /lib64 and /lib in find_library (#555669).
  • From: David Cantrell
• Re: [PATCH 3/4] Make sure we get required nss-softokn libs in the images.
  • From: David Cantrell
• Re: [master] & [rhel6-branch] install test blockers
  • From: Chris Lumens
• Re: [PATCH 3/4] Make sure we get required nss-softokn libs in the images.
  • From: Chris Lumens
• Re: [PATCH 4/4] Make sure we always check /lib64 and /lib in find_library (#555669).
  • From: Chris Lumens
• [master] & [rhel6-branch] install test blockers
  • From: David Cantrell
• [PATCH 1/4] Update =~ regexps in linuxrc.s390 for bash-4.1 (#558537).
  • From: David Cantrell
• [PATCH 2/4] Add 5 second ping delay for gateway and dns test on s390x (#536815).
  • From: David Cantrell
• [PATCH 3/4] Make sure we get required nss-softokn libs in the images.
  • From: David Cantrell
• [PATCH 4/4] Make sure we always check /lib64 and /lib in find_library (#555669).
  • From: David Cantrell
• Re: [PATCH 2/2] cleardisk_gui: Fix going back to the cleardisks gui
  • From: Chris Lumens
• Re: [PATCH] cleardisks / filter ui enable per column sorting by clicking headings
  • From: Chris Lumens
• [PATCH] cleardisks / filter ui enable per column sorting by clicking headings
  • From: Hans de Goede
• Re: [PATCH 1/2] cleardisk_gui: Base autoselection of bootdev on detected BIOS order
  • From: Chris Lumens
• Re: [PATCH 3/4] Remove no longer used isys EDD code
  • From: Chris Lumens
• Re: [PATCH 2/4] Hookup new python EDD code (#478996)
  • From: Chris Lumens
• Re: [PATCH 2/4] Hookup new python EDD code (#478996)
  • From: Chris Lumens
• Re: [PATCH 1/4] Add pure python EDD code parsing and compareDrives substitute (#478996)
  • From: Chris Lumens
• Re: [PATCH] Add anaconda support for group removal syntax (#558516).
  • From: Hans de Goede
• Re: [PATCH] Add anaconda support for group removal syntax (#558516).
  • From: Chris Lumens
• Re: [PATCH 4/4] Fix typo in partition_ui_helpers_gui.py
  • From: Chris Lumens
• Re: [PATCH] Add anaconda support for group removal syntax (#558516).
  • From: Hans de Goede
• [PATCH] Add anaconda support for group removal syntax (#558516).
  • From: Chris Lumens
• [PATCH 2/2] cleardisk_gui: Fix going back to the cleardisks gui
  • From: Hans de Goede
• [PATCH 1/2] cleardisk_gui: Base autoselection of bootdev on detected BIOS order
  • From: Hans de Goede
• Re: [PATCH rhel6-branch] libsoftokn3.so is in /usr/lib, just like libnssdbm3.so (#557702).
  • From: David Cantrell
• Re: [PATCH rhel6-branch] libsoftokn3.so is in /usr/lib, just like libnssdbm3.so (#557702).
  • From: Jeremy Katz
• Re: [PATCH rhel6-branch] libsoftokn3.so is in /usr/lib, just like libnssdbm3.so (#557702).
  • From: Chris Lumens
• Re: [PATCH rhel6-branch] libsoftokn3.so is in /usr/lib, just like libnssdbm3.so (#557702).
  • From: Bill Nottingham
• Re: [PATCH rhel6-branch] libsoftokn3.so is in /usr/lib, just like libnssdbm3.so (#557702).
  • From: Chris Lumens
• Re: [PATCH rhel6-branch] libsoftokn3.so is in /usr/lib, just like libnssdbm3.so (#557702).
  • From: David Cantrell
• Re: [PATCH rhel6-branch] libsoftokn3.so is in /usr/lib, just like libnssdbm3.so (#557702).
  • From: Bill Nottingham
• [PATCH rhel6-branch] libsoftokn3.so is in /usr/lib, just like libnssdbm3.so (#557702).
  • From: Chris Lumens
• Re: [PATCH] Add strace to the stage2 image and initrd.
  • From: David Lehman
• [PATCH] Add strace to the stage2 image and initrd.
  • From: Chris Lumens
• [PATCH 1/4] Add pure python EDD code parsing and compareDrives substitute (#478996)
  • From: Hans de Goede
• [PATCH 2/4] Hookup new python EDD code (#478996)
  • From: Hans de Goede
• [PATCH 4/4] Fix typo in partition_ui_helpers_gui.py
  • From: Hans de Goede
• [PATCH 3/4] Remove no longer used isys EDD code
  • From: Hans de Goede
• Re: [PATCH 1/2] When in simple mode show BIOS RAID sets in basic page
  • From: Hans de Goede
• Re: RFC: remove kickstart and driverdisk --biospart / bd:// support
  • From: Hans de Goede
• Re: [PATCH] Fix thinko in displaying the first filter notebook page that disks.
  • From: Martin Sivak
• Re: [PATCH 1/2] Fix visibility counting on filter notebook pages.
  • From: Ales Kozumplik
• Re: [PATCH 2/2] multipath gives us CCISS devices names with ! in them, but we expect /.
  • From: Ales Kozumplik
• Re: RFC: remove kickstart and driverdisk --biospart / bd:// support
  • From: Domsch, Matt
• Re: RFC: remove kickstart and driverdisk --biospart / bd:// support
  • From: Jeremy Katz
• [PATCH 2/2] multipath gives us CCISS devices names with ! in them, but we expect /.
  • From: Chris Lumens
• [PATCH 1/2] Fix visibility counting on filter notebook pages.
  • From: Chris Lumens
• [PATCH] two basic patches
  • From: Chris Lumens
• [PATCH] Fix thinko in displaying the first filter notebook page that disks.
  • From: Peter Jones
• Re: [PATCH] DMRaidArrayDevice don't pass major/minor to DMDevice.__init__ (#558440)
  • From: David Lehman
• [PATCH] DMRaidArrayDevice don't pass major/minor to DMDevice.__init__ (#558440)
  • From: Hans de Goede
• Re: [PATCH 1/4] Give MD BIOS RAID arrays there own type
  • From: David Lehman
• Re: [PATCH 3/4] Make storage.unusedMDFoo also check mdcontainer members
  • From: David Lehman
• Re: [PATCH 1/5] Make DMDevice.__init__ accept major and minor arguments (#558440)
  • From: David Lehman
• Re: [PATCH 1/2] When in simple mode show BIOS RAID sets in basic page
  • From: Chris Lumens
• Re: [PATCH 1/4] Give MD BIOS RAID arrays there own type
  • From: Ales Kozumplik
• Re: [PATCH] Filter UI: don't show cciss controllers without sets
  • From: Hans de Goede
• Re: RFC: remove kickstart and driverdisk --biospart / bd:// support
  • From: Chris Lumens
• Re: [PATCH] Filter UI: don't show cciss controllers without sets
  • From: Chris Lumens
• Re: [PATCH 5/5] Filter UI: give BIOS RAID sets a usable model string and display that
  • From: Chris Lumens
• Re: [PATCH 5/5] Filter UI: give BIOS RAID sets a usable model string and display that
  • From: Hans de Goede
• Re: [PATCH] Filter UI: don't show cciss controllers without sets
  • From: Hans de Goede
• Re: [PATCH] Check for devices with no media present in filter_gui.py (#558177)
  • From: Chris Lumens
• Re: [PATCH 5/5] Filter UI: give BIOS RAID sets a usable model string and display that
  • From: Chris Lumens
• Re: [PATCH] Filter UI: don't show cciss controllers without sets
  • From: Chris Lumens
• Re: [rhel5-branch] Don't show NFS note for HTTP and FTP installation (#557477).
  • From: Martin Sivak
• Re: [master] init, fixes a bug in getSyslog() causing a SEGV
  • From: Martin Sivak
• Re: [PATCH 4/5] Make MDRaidArray description the same as DMRaidArray
  • From: Martin Sivak
• Re: [PATCH] Filter UI: don't show cciss controllers without sets
  • From: Martin Sivak
• Re: [PATCH 3/5] Add DMRaidArrayDevice description and model properties (#558440)
  • From: Martin Sivak
• Re: [PATCH 5/5] Filter UI: give BIOS RAID sets a usable model string and display that
  • From: Martin Sivak
• Re: [PATCH 2/5] DMRaidArrayDevices exist when created (#558440)
  • From: Martin Sivak
• [PATCH] Filter UI: don't show cciss controllers without sets
  • From: Hans de Goede
• Re: [PATCH 1/5] Make DMDevice.__init__ accept major and minor arguments (#558440)
  • From: Martin Sivak
• Re: [PATCH 1/2] Use description property for MDRaidArrayDevice model
  • From: Martin Sivak
• [PATCH 4/5] Make MDRaidArray description the same as DMRaidArray
  • From: Hans de Goede
• Re: [PATCH 2/2] Clarify syslinux menu text (#557774)
  • From: Martin Sivak
• [PATCH 2/5] DMRaidArrayDevices exist when created (#558440)
  • From: Hans de Goede
• [PATCH 5/5] Filter UI: give BIOS RAID sets a usable model string and display that
  • From: Hans de Goede
• [PATCH 3/5] Add DMRaidArrayDevice description and model properties (#558440)
  • From: Hans de Goede
• [PATCH 1/5] Make DMDevice.__init__ accept major and minor arguments (#558440)
  • From: Hans de Goede
• Re: [PATCH 1/4] Give MD BIOS RAID arrays there own type
  • From: Hans de Goede
• Re: [PATCH 3/4] Make storage.unusedMDFoo also check mdcontainer members
  • From: Ales Kozumplik
• Re: [PATCH 2/4] Remove MDRaidArrayDevice biosraid property
  • From: Ales Kozumplik
• Re: [PATCH 4/4] MDRaidArrayDevice: Get rid of the ugly self.devices[0].type checking
  • From: Ales Kozumplik
• Re: [PATCH 1/4] Give MD BIOS RAID arrays there own type
  • From: Ales Kozumplik
• [PATCH 2/2] Clarify syslinux menu text (#557774)
  • From: Hans de Goede
• [PATCH 1/2] Use description property for MDRaidArrayDevice model
  • From: Hans de Goede
• Re: [PATCH] Check for devices with no media present in filter_gui.py (#558177)
  • From: Ales Kozumplik
• Re: [PATCH 2/2] Replace linuxrc.s390 network configuration code with NetworkManager.
  • From: Steffen Maier
• RFC: remove kickstart and driverdisk --biospart / bd:// support
  • From: Hans de Goede
• [PATCH 1/4] Give MD BIOS RAID arrays there own type
  • From: Hans de Goede
• [PATCH 3/4] Make storage.unusedMDFoo also check mdcontainer members
  • From: Hans de Goede
• [PATCH 4/4] MDRaidArrayDevice: Get rid of the ugly self.devices[0].type checking
  • From: Hans de Goede
• [PATCH 2/4] Remove MDRaidArrayDevice biosraid property
  • From: Hans de Goede
• [PATCH] Check for devices with no media present in filter_gui.py (#558177)
  • From: Hans de Goede
• Re: [PATCH 2/8] Fixup MDRaidArrayDevice.biosraid
  • From: Dan Williams
• Re: [PATCH 2/2] Replace linuxrc.s390 network configuration code with NetworkManager.
  • From: David Cantrell
• Re: [PATCH] Only /boot needs to be on one of the bootFSTypes. (#557718)
  • From: Chris Lumens
• [PATCH] Only /boot needs to be on one of the bootFSTypes. (#557718)
  • From: David Lehman
• Re: [PATCH 2/2] Replace linuxrc.s390 network configuration code with NetworkManager.
  • From: Steffen Maier
• Re: [PATCH 2/8] Fixup MDRaidArrayDevice.biosraid
  • From: Hans de Goede
• Re: [PATCH 6/8] Add isDisk property to MDRaidArrayDevice
  • From: Hans de Goede
• Re: [PATCH 5/7] Make addUdevPartitionDevice add lvm filters for ignored partitions
  • From: David Lehman
• Re: [PATCH 2/8] Fixup MDRaidArrayDevice.biosraid
  • From: David Lehman
• Re: [PATCH 4/7] Remove BIOSRAID see if ignored again code from addUdevPartitionDevice
  • From: Hans de Goede
• Re: [PATCH 3/7] Remove special partition handling from isIgnored
  • From: Hans de Goede
• Re: [PATCH 8/8] MDRaidMember.__str__ add biosraid attribute to the returned string
  • From: David Lehman
• Re: [PATCH 5/7] Make addUdevPartitionDevice add lvm filters for ignored partitions
  • From: Hans de Goede
• Re: [PATCH 7/8] Remove setting of _isDisk and _partitionable from iscsi and fcoe disk code
  • From: David Lehman
• Re: [PATCH 5/8] Make isDisk a property
  • From: David Lehman
• Re: [master] Prevent init from telling us its story if the shutdown was planned.
  • From: Steffen Maier
• Re: [PATCH 6/8] Add isDisk property to MDRaidArrayDevice
  • From: David Lehman
• Re: [PATCH 3/7] Remove special partition handling from isIgnored
  • From: David Lehman
• Re: [PATCH 4/7] Remove BIOSRAID see if ignored again code from addUdevPartitionDevice
  • From: David Lehman
• Re: [PATCH 5/7] Make addUdevPartitionDevice add lvm filters for ignored partitions
  • From: David Lehman
• Re: [PATCH 2/8] Fixup MDRaidArrayDevice.biosraid
  • From: Hans de Goede
• Re: [PATCH 2/8] Fixup MDRaidArrayDevice.biosraid
  • From: David Lehman
• Re: [PATCH 1/2] When in simple mode show BIOS RAID sets in basic page
  • From: Hans de Goede
• Re: [PATCH 1/2] nss files moved around again, make sure we get the NM required ones.
  • From: Chris Lumens
• Re: [PATCH 1/8] Update exclusiveDisks when handling mdraid BIOSRAID in isIgnored
  • From: Chris Lumens
• Re: [PATCH 4/8] Remove DMRaidDevice.mediaPresent method
  • From: Chris Lumens
• Re: [PATCH 3/8] Honor clearPartDisks when clearing whole disk formatting formatted disks
  • From: Chris Lumens
• Re: [PATCH 7/7] MDRaidDevice does not have serial, vendor or bus arguments
  • From: Chris Lumens
• Re: [PATCH 2/7] Fix MDRaidArrayDevice mediaPresent to not depend on paritioned state
  • From: Chris Lumens
• Re: [PATCH 6/7] Don't traceback on devices without a serial
  • From: Chris Lumens
• Re: [PATCH 3/7] Remove special partition handling from isIgnored
  • From: Chris Lumens
• Re: [PATCH 2/2] Replace linuxrc.s390 network configuration code with NetworkManager.
  • From: Chris Lumens
• Re: [PATCH 1/7] Special handling for mdraid BIOS RAID sets in exclusive disks
  • From: Chris Lumens
• [rhel5-branch] Don't show NFS note for HTTP and FTP installation (#557477).
  • From: Ales Kozumplik
• [master] init, fixes a bug in getSyslog() causing a SEGV
  • From: Ales Kozumplik
• Re: [master] Prevent init from telling us its story if the shutdown was planned.
  • From: Ales Kozumplik
• Re: [PATCH 07/19] Add udev accessor for ID_MODEL_FROM_DATABASE/ID_MODEL.
  • From: Chris Lumens
• [PATCH 8/8] MDRaidMember.__str__ add biosraid attribute to the returned string
  • From: Hans de Goede
• [PATCH 3/8] Honor clearPartDisks when clearing whole disk formatting formatted disks
  • From: Hans de Goede
• [PATCH 7/8] Remove setting of _isDisk and _partitionable from iscsi and fcoe disk code
  • From: Hans de Goede
• [PATCH 2/8] Fixup MDRaidArrayDevice.biosraid
  • From: Hans de Goede
• [PATCH 6/8] Add isDisk property to MDRaidArrayDevice
  • From: Hans de Goede
• [PATCH 4/8] Remove DMRaidDevice.mediaPresent method
  • From: Hans de Goede
• [PATCH 1/8] Update exclusiveDisks when handling mdraid BIOSRAID in isIgnored
  • From: Hans de Goede
• [PATCH 5/8] Make isDisk a property
  • From: Hans de Goede
• Re: [master] & [rhel6-branch] NetworkManager fixes
  • From: Hans de Goede
• [PATCH 4/7] Remove BIOSRAID see if ignored again code from addUdevPartitionDevice
  • From: Hans de Goede
• [PATCH 7/7] MDRaidDevice does not have serial, vendor or bus arguments
  • From: Hans de Goede
• [PATCH 5/7] Make addUdevPartitionDevice add lvm filters for ignored partitions
  • From: Hans de Goede
• [PATCH 3/7] Remove special partition handling from isIgnored
  • From: Hans de Goede
• [PATCH 2/7] Fix MDRaidArrayDevice mediaPresent to not depend on paritioned state
  • From: Hans de Goede
• [PATCH 6/7] Don't traceback on devices without a serial
  • From: Hans de Goede
• [PATCH 1/7] Special handling for mdraid BIOS RAID sets in exclusive disks
  • From: Hans de Goede
• [PATCH 2/2] Replace linuxrc.s390 network configuration code with NetworkManager.
  • From: David Cantrell
• [PATCH 1/2] nss files moved around again, make sure we get the NM required ones.
  • From: David Cantrell
• [master] & [rhel6-branch] NetworkManager fixes
  • From: David Cantrell
• Re: [PATCH 3/4] Special handling for mdraid BIOS RAID sets in exclusive disks
  • From: Hans de Goede
• Re: [PATCH 3/4] Special handling for mdraid BIOS RAID sets in exclusive disks
  • From: Chris Lumens
• Re: [PATCH 2/6] Make sure MultipathDevice is setup correctly.
  • From: David Lehman
• Re: [PATCH 3/6] Create multipath.conf
  • From: David Lehman
• Re: [PATCH 3/6] Create multipath.conf
  • From: Peter Jones
• Re: [PATCH 3/6] Create multipath.conf
  • From: Peter Jones
• Re: [PATCH 4/4] Add a description attribute to MDRaidArrayDevice
  • From: Chris Lumens
• Re: [PATCH 1/2] When in simple mode show BIOS RAID sets in basic page
  • From: Chris Lumens
• Re: [PATCH 1/2] When in simple mode show BIOS RAID sets in basic page
  • From: Hans de Goede
• [PATCH 1/4] When in simple mode show BIOS RAID sets in basic page
  • From: Hans de Goede
• [PATCH 3/4] Special handling for mdraid BIOS RAID sets in exclusive disks
  • From: Hans de Goede
• [PATCH 4/4] Add a description attribute to MDRaidArrayDevice
  • From: Hans de Goede
• [PATCH 2/4] 2 small mdraid related storage/udev.py changes
  • From: Hans de Goede
• Re: [PATCH 2/2] Don't do exclusiveDisks checking for BIOS RAID members
  • From: Hans de Goede
• Re: [PATCH 3/6] Create multipath.conf
  • From: David Lehman
• Re: [PATCH 4/6] Make PartitionDevice have its own teardown()
  • From: David Lehman
• [PATCH] Create multipath.conf
  • From: Peter Jones
• Re: [PATCH 3/6] Create multipath.conf
  • From: Peter Jones
• Re: [PATCH 3/3] Connect nm-connection-editor to networ config button.
  • From: Chris Lumens
• Re: [PATCH 4/6] Make PartitionDevice have its own teardown()
  • From: Peter Jones
• Re: [PATCH 5/6] Make multipath support use device-mapper-multipath to setup mpaths.
  • From: Peter Jones
• Re: [master] Prevent init from telling us its story if the shutdown was planned.
  • From: David Cantrell
• Re: [PATCH 3/6] Create multipath.conf
  • From: Peter Jones
• Re: [PATCH 1/2] When in simple mode show BIOS RAID sets in basic page
  • From: Chris Lumens
• Re: [PATCH 2/6] Make sure MultipathDevice is setup correctly.
  • From: Peter Jones
• Re: [PATCH 2/2] Don't do exclusiveDisks checking for BIOS RAID members
  • From: Chris Lumens
• Re: [PATCH] Add mpath device to selection instead of its constituents.
  • From: Chris Lumens
• Re: [master] Prevent init from telling us its story if the shutdown was planned.
  • From: Ales Kozumplik
• Re: [master] Prevent init from telling us its story if the shutdown was planned.
  • From: Steffen Maier
• [PATCH 1/2] When in simple mode show BIOS RAID sets in basic page
  • From: Hans de Goede
• [PATCH 2/2] Don't do exclusiveDisks checking for BIOS RAID members
  • From: Hans de Goede
• [master] Prevent init from telling us its story if the shutdown was planned.
  • From: Ales Kozumplik
• Re: [PATCH] Fix a syntax error in filter_gui.py
  • From: Ales Kozumplik
• [PATCH] Fix a syntax error in filter_gui.py
  • From: Hans de Goede
• Re: 2 commits - anaconda_log.py storage/storage_log.py
  • From: Ales Kozumplik
• Re: [PATCH] Add mpath device to selection instead of its constituents.
  • From: Hans de Goede
• Re: [PATCH 5/6] Make multipath support use device-mapper-multipath to setup mpaths.
  • From: Hans de Goede
• Re: [PATCH 4/6] Make PartitionDevice have its own teardown()
  • From: Hans de Goede
• Re: [PATCH 5/6] Make multipath support use device-mapper-multipath to setup mpaths.
  • From: Hans de Goede