U-Boot V2 Development (Barebox)

• Thread Index

• Re: [PATCH v2 4/5] RISC-V: S-Mode: propagate Hart ID
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] RISC-V: extend multi-image to support both S- and M-Mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] RISC-V: cpuinfo: return some output for non-SBI systems as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] clocksource: RISC-V: demote probe success messages to debug level
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] RISC-V: S-Mode: propagate Hart ID
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] RISC-V: erizo: make it easier to reuse ns16550 debug_ll
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: of_dump: implement -p for printing properties only
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH RESEND] fixup! gpio: generic: sync with upstream Linux gpio-mmio driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] net: macb: add SiFive support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 07/13] test: add basic barebox self-test infrastructure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 10/13] test: add first sample tests
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 09/13] test: add labgrid configs for some emulated targets
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 12/13] test: self: run selftests as part of the pytest suite
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 06/13] Documentation: boards: RISC-V: update TinyEMU support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 02/13] kbuild: add ARCH={i386, x86_64} as aliases for x86
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 11/13] test: add emulate.pl, a runner for barebox on emulated targets
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 13/13] test: add bthread test
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 08/13] test: self: port Linux printf kselftest
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 00/13] add barebox in-tree testing infrastructure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 03/13] kbuild: add ARCH=um alias for sandbox
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 01/13] kbuild: add install target
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 05/13] openrisc: set default KBUILD_IMAGE
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 04/13] MIPS: qemu-malta: generate swapped image as part of multi-image build
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] kconfig: update to Linux 5.13-rc1
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH 1/2] firmware: refactor firmware/Makefile
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH] driver: have dev_set_name() return 0 on success
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] of: base: constify some property pointers
  • From: Trent Piepho <tpiepho@xxxxxxxxx>
• [PATCH v2] ARM: SoCFPGA: add Terasic DE10-Nano board support
  • From: Gwenhael Goavec-Merou <gwenj@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] ARM: protonic: add initial support for the Protonic PRT8MM family of boards
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] drivers: mci: imx-esdhc-common.c: Add missing dev_dbg define for pbl case
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] ARM: imx_v8_defconfig: enable PRT8MM board
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: imx_v8_defconfig: enable EHCI
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 2/2] bootm: add support for booting compressed images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support
  • From: Gwenhael Goavec-Merou <gwenj@xxxxxxxxxxxxxx>
• [PATCH] video: reunite fb devices with their hardware parent
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] commands: of_dump: implement -p for printing properties only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] imx-image: Fix uninitialized add_barebox_header
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v2] mtd: nand: Add help text for i.MX NAND controllers
  • From: Trent Piepho <tpiepho@xxxxxxxxx>
• Re: [PATCH] mtd: nand: Add help text for i.MX NAND controllers
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] imx-image: Fix uninitialized add_barebox_header
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: protonic: add initial support for the Protonic PRT8MM family of boards
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: nfs: Decrease NFS timeout
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand: Add help text for i.MX NAND controllers
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] imx-image: Fix uninitialized add_barebox_header
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] uncompress: use read_full to fill decompression buffer
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: barebox ubifs support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• barebox ubifs support
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• Re: [PATCH 2/2] bootm: add support for booting compressed images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] bootm: add support for booting compressed images
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] fs: nfs: Decrease NFS timeout
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] bootm: add support for booting compressed images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] bootm: add support for booting compressed images
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] bootm: add support for booting compressed images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] bootm: add support for booting compressed images
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] uncompress: use read_full to fill decompression buffer
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] imx-image: Fix uninitialized add_barebox_header
  • From: Trent Piepho <tpiepho@xxxxxxxxx>
• [PATCH] mtd: nand: Add help text for i.MX NAND controllers
  • From: Trent Piepho <tpiepho@xxxxxxxxx>
• [PATCH v3] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] of: fix up /chosen node even when there are no bootargs
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] bootm: add support for booting compressed images
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: protonic: add initial support for the Protonic PRT8MM family of boards
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: imx_v8_defconfig: enable EHCI
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: imx_v8_defconfig: enable PRT8MM board
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/2] bootm: add support for booting compressed images
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/2] uncompress: use read_full to fill decompression buffer
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v3 01/10] clocksource: timer-riscv: select CSR from device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] litex serial: add setbrg callback
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] commands: mount: replace printf by pr_info
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] of: introduce global.linux.bootargs_append
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] of: fix up /chosen node even when there are no bootargs
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH v3 09/10] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 1/4] commands: mount: replace printf by pr_info
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 09/10] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] litex serial: add setbrg callback
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 10/10] RISC-V: add litex_linux_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 09/10] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 07/10] spi: add litex spiflash driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 08/10] net: add LiteEth driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 06/10] gpio: add driver for 74xx-ICs with MMIO access
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 05/10] litex serial: add setbrg callback
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 04/10] serial: add litex UART driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 02/10] RISC-V: make it possible to run nmon from PBL C code
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 01/10] clocksource: timer-riscv: select CSR from device tree
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 03/10] RISC-V: boards: erizo: make it possible to use nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 2/2] mci: arasan: configure data transfer only if we actually have data
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mci: arasan: wait for data available only on read
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] net: dns: use correct nameserver var name in error message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] net: dns: use correct nameserver var name in error message
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] net: dns: user corrent nameserver var name in error message
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v4] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: nitrogen6x: delete wrong memory node from dts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: Add support for gd25q16
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: imx: Replace license and copyright boilerplate by SPDX identifiers
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: i.MX: warn if vbus regulator isn't available
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] commands: mount: replace printf by pr_info
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: Update env sources documentation
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1] ARM: protonic: vicut1: disable on-die termination to fix PHY bootstrapping
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.13-rc1
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH] arm: imx: Replace license and copyright boilerplate by SPDX identifiers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: i.MX: warn if vbus regulator isn't available
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Change printf behaviour
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/4] commands: mount: replace printf by pr_info
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/4] common: bootm: replace printf by pr_err/info
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 0/4] Change printf behaviour
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/4] common: boot: replace printf by pr_info/warn variants
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 4/4] common: oftree: replace printf by pr_info
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v4] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Holger Assmann <h.assmann@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: Add support for gd25q16
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mtd: spi-nor: Add support for gd25q16
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• Re: configuring state framework for x86/EFI
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• configuring state framework for x86/EFI
  • From: Laszlo Sitzer <laszlo.sitzer@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] mci: arasan: configure data transfer only if we actually have data
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• [PATCH 1/2] mci: arasan: wait for data available only on read
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH 03/14] clk: introduce struct clk_hw
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] Documentation: Update env sources documentation
  • From: Trent Piepho <tpiepho@xxxxxxxxx>
• Re: [PATCH 08/14] Add rational_best_approximation()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 05/14] clk: divider: Add ro ops
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 04/14] clk: introduce clk_register()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 03/14] clk: introduce struct clk_hw
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 02/14] clk: rename clk_register() to bclk_register()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 01/14] clk: introduce clk init op
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/14] Add rational_best_approximation()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/14] clk: Add Linux functions to register a divider
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/14] clk: introduce clk init op
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/14] clk: introduce clk_register()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/14] clk: rename clk_register() to bclk_register()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/14] clk: introduce struct clk_hw
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 14/14] clk: Add Linux functions to register a mux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/14] clk: Update fractional divider from Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/14] clk: Add lock to different clock types
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/14] clk: Add Linux functions to register a gate
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/14] clk: move fixed_factor to include/linux/clk.h
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/14] clk: mux: Add ro ops
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/14] clk: divider: Add ro ops
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/14] clk: Add Linux functions to register a fixed factor clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 00/14] clk updates
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: Rockchip: Merge defconfig files
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: rockchip: Allow to build for multiple SoCs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: rockchip: radxa-rock: build defaultenv
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: Rockchip: Merge defconfig files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/3] rockchip: Build for multiple SoCs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Board specific environments and broken configs
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Holger Assmann <h.assmann@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Holger Assmann <h.assmann@xxxxxxxxxxxxxx>
• [PATCH] arm/mvebu: sync barebox-arm-head.h to generic variant
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1] ARM: protonic: vicut1: disable on-die termination to fix PHY bootstrapping
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• AW: [PATCH 1/1] Zynq: add support to chainload another barebox
  • From: Michael Graichen <michael.graichen@xxxxxxxxxxx>
• AW: [PATCH 1/1] zedboard: add support for usb
  • From: Michael Graichen <michael.graichen@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: more precise and helpful message for dr_mode config issues
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: do no print error message with dwc2_warn() macro
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [BUG] mtd: cfi-flash: comparison of unsigned expression in '>= 0' is always true
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: Board specific environments and broken configs
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 11/15] scripts: zynq_mkimage: Make locally used function static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 14/15] clk: zynqmp: Fix wrong error check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/15] ARM: layerscape: Fix wrong error check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/15] ARM: module: Remove always false check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/15] i.MX FCB: Fix error checking
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/15] ARM: socfpga: Fix timeout tests
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/15] clk: tegra: Fix -Wtype-limits compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/15] mtd: cfi-flash: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/15] ARM: i.MX bbu-external-nand: Do not modify image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/15] aiodev: lm75: Handle unknown lm75 types
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 15/15] powerpc: law: use signed type to allow error checking
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/15] arm: friendlyarm-tiny210: Remove dead code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/15] ARM: i.MX: xload-gpmi: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/15] pci: mvebu: Fix wrong error check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/15] ARM: phytec-phycard-omap3: Fix checking of unsigned variable being negative
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 00/15] Compiler warning fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Holger Assmann <h.assmann@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: more precise and helpful message for dr_mode config issues
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] usb: dwc2: more precise and helpful message for dr_mode config issues
  • From: Enrico Jorns <ejo@xxxxxxxxxxxxxx>
• v2021.05.0
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] usb: dwc2: do no print error message with dwc2_warn() macro
  • From: Enrico Jorns <ejo@xxxxxxxxxxxxxx>
• [BUG] mtd: cfi-flash: comparison of unsigned expression in '>= 0' is always true
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] kvx: Implement dma handling primitives
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH v2 3/5] kvx: Implement dma handling primitives
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Zynq: add support to chainload another barebox
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: Board specific environments and broken configs
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: i.MX: Remove mx31moboard board support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: i.MX: Skov-imx6: Remove custom env
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: Remove delphi-poc20 dead leftover
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.13-rc1
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 11/12] net: macb: add SiFive support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Board specific environments and broken configs
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] readline_simple: Fix compiler warning
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH] readline_simple: Fix compiler warning
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] readline_simple: Fix compiler warning
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• Re: [PATCH] common: console_common: Replace vsprintf with vsnprintf
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] mci: atmel-sdhci: FIx compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: at91: boot_test_cmd: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] readline_simple: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.13-rc1
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: use new vendor prefix for MNT Reform2
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] startup: introduce global.endianness variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: console_common: Replace vsprintf with vsnprintf
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] driver: add flag to check if cdev is an mci device
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Revert "ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel"
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] ARM: use new vendor prefix for MNT Reform2
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• [PATCH] kconfig: update to Linux 5.13-rc1
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH 2/2] RISC-V: extend multi-image to support both S- and M-Mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] RISC-V: extend multi-image to support both S- and M-Mode
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] fs: nfs: Fix readlink max size check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2] startup: introduce global.endianness variable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: introduce global.endianness variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] fixup! gpio: generic: sync with upstream Linux gpio-mmio driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] RISC-V: extend multi-image to support both S- and M-Mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: introduce global.endianness variable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] driver: add flag to check if cdev is an mci device
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] mci: mci-core: set the DEVFS_IS_MCI_MAIN_PART_DEV flag
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH] Removed Unreachable code: net/net.c: net_handle_arp()
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] README: advertise lore.barebox.org instead of mail-archive.com
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! RISC-V: erizo: drop mach-erizo directory
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] Removed Unreachable code: net/net.c: net_handle_arp()
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• [PATCH v3] Documentation: boards: sandbox: some extra steps requires for DHCP network configuration for sandbox on the host OS
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 05/11] serial: add litex UART driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 05/11] serial: add litex UART driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] README: advertise lore.barebox.org instead of mail-archive.com
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 00/11] RISC-V: add LiteX SoC support; resurrect nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 2/3] fs: check for valid name in filename_lookup()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/3] Fix opening empty path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] fs: check getname() return value in open()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] fs: check for empty name in getname()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 11/11] RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! RISC-V: erizo: drop mach-erizo directory
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH v2 00/11] RISC-V: add LiteX SoC support; resurrect nmon
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [BUG] Stack buffer overflow WRITE of size 1 in barebox_printf function
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: storage: retry for up to 10s on lengthy HDD spin up
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] usb: dwc2: increase timeout for waiting on host mode
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: nand_bbt: Skip bad blocks when searching for the BBT in NAND
  • From: "sha@xxxxxxxxxxxxxx" <sha@xxxxxxxxxxxxxx>
• [PATCH v2] Revert "ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel"
  • From: Yunus Bas <y.bas@xxxxxxxxx>
• Re: [PATCH 1/3] bootm: move ARM64 Linux image parsing to common directory
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] Revert "ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel"
  • From: Yunus Bas <y.bas@xxxxxxxxx>
• Re: [PATCH 09/12] gpio: generic: sync with upstream Linux gpio-mmio driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 09/11] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 11/11] RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 08/11] net: add LiteEth driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 10/11] RISC-V: add litex_linux_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 03/11] RISC-V: make it possible to run nmon from PBL C code
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 07/11] spi: add litex spiflash driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 06/11] gpio: add driver for 74xx-ICs with MMIO access
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 05/11] serial: add litex UART driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 04/11] RISC-V: boards: erizo: make it possible to use nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 00/11] RISC-V: add LiteX SoC support; resurrect nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] driver: add flag to check if cdev is an mci device
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] mci: mci-core: set the DEVFS_IS_MCI_MAIN_PART_DEV flag
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mci: mci-core: set the DEVFS_IS_MCI_DEV flag
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] driver: add flag to check if cdev is an mci device
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mci: mci-core: set the DEVFS_IS_MCI_DEV flag
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mci: mci-core: set the DEVFS_IS_MCI_DEV flag
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] driver: add flag to check if cdev is an mci device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 6/9] net: add LiteEth driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/3] mci: mci-core: set the DEVFS_IS_MCI_DEV flag
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/3] driver: add flag to check if cdev is an mci device
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 6/9] net: add LiteEth driver
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 14/17] ARM: stm32mp: ddrctrl: add deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/17] of: platform: Keep track of populated platform devices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/17] of: implement of_get_stdoutpath()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/17] of: base: move clock init from of_probe() to barebox_register_of()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/17] of: base: move memory init from DT to initcall
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/17] common: add initial barebox deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/17] pinctrl: Find controller node first
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/17] of: platform: remove check of already added devices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v5 00/17] barebox deep probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 16/17] ARM: i.MX Phytec physom: convert to board driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/17] imx53: remove unused imx53_add_nand
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/17] initcall: add of_populate_initcall
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 15/17] ARM: boards: mx6-sabrelite: add deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/17] of: Set of_chosen and of_model earlier
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/17] ARM: i.MX: esdctl: add deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/17] pinctrl: Add deep probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/17] common: Explicitly probe consoles earlier with deep probe
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 7/9] RISC-V: add initial LiteX SoC support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 5/9] spi: add litex spiflash driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 7/9] RISC-V: add initial LiteX SoC support
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• Re: [PATCH 5/9] spi: add litex spiflash driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] RISC-V: add litex-linux board support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 4/9] gpio: add driver for 74xx-ICs with MMIO access
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/9] serial: add litex UART driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/9] RISC-V: boards: erizo: make it possible to use nmon
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] RISC-V: add litex-linux board support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 7/9] RISC-V: add initial LiteX SoC support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 8/9] RISC-V: add litex-linux board support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 9/9] RISC-V: add litex_linux_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 6/9] net: add LiteEth driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 4/9] gpio: add driver for 74xx-ICs with MMIO access
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 7/9] RISC-V: add initial LiteX SoC support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/9] RISC-V: boards: erizo: make it possible to use nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/9] RISC-V: add LiteX SoC support; resurrect nmon
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 5/9] spi: add litex spiflash driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/9] serial: add litex UART driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• AW: [PATCH 1/1] Zynq: add support to chainload another barebox
  • From: Michael Graichen <michael.graichen@xxxxxxxxxxx>
• Re: [PATCH 1/1] Zynq: add support to chainload another barebox
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] zedboard: add support for usb
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Zynq: add support to chainload another barebox
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] clk: imx28: propagate rate change to parents
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] clk: imx28: Set gpmi clock to gpmi_ref
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] mtd: nand: mxs: Enable edo mode switching for i.MX28
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] RISC-V: asm: barebox-riscv-head: use load-offset of 0
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] bootm: move ARM64 Linux image parsing to common directory
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] RISC-V: add Linux kernel boot support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] ARM: webasto-ccbv2: Add variant with 512MB RAM
  • From: Holger Assmann <h.assmann@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility
  • From: Yunus Bas <Y.Bas@xxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility
  • From: Yunus Bas <Y.Bas@xxxxxxxxx>
• [PATCH 1/1] zedboard: add support for usb
  • From: Michael Graichen <michael.graichen@xxxxxxxxxxx>
• Re: [PATCH] fs: Fix link_path_walk to return -ENOENT on empty path
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] usbgadget: add support for USB mass storage gadget
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] usbgadget: refactor usbgadget_register to accept array
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] slice: reschedule bthreads doing File I/O in command context
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] bthread: implement basic Linux-like completion API
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] usbgadget: add support for USB mass storage gadget
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: kvx: Fix broken link
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: imx6 nand: dbbt version/layout
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] fixup! fastboot/dfu: use system partitions as fall back
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility
  • From: Yunus Bas <y.bas@xxxxxxxxx>
• Re: [PATCH 0/4] x86: add EFI PCI host and iTCO watchdog support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/spdxcheck.py: Use Python 3
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 04/12] RISC-V: support multi-image for all machines
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] USB: gadget: refactor to allow easier extension
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] fixup! common: add initial barebox deep-probe support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 14/16] file_list: add file_list_detect_all()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/16] string: implement strstarts along with strends
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 12/16] fastboot/dfu: use system partitions as fall back
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/16] usb: gadget: dfu: change status message to info log level
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 11/16] file_list: make freeing a NULL pointer a no-op
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/16] vsprintf: introduce %m shorthand for "%s", strerror(errno)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/16] common: add generic system partitions interface
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/16] usbgadget: autostart: fix indeterminism around usbgadget.autostart
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 00/16] USB: gadget: refactor to allow easier extension
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/16] common: console: add log_writefile to write log into new file
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 15/16] common: make FILE_LIST feature unconditional
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/16] fastboot: handle ill-named partitions gracefully
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/16] usbgadget: allow DFU and Fastboot functions to coexist
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 13/16] bbu: add function to directly add handlers into file_list
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/16] param: introduce file-list parameter type
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/16] show_progress: add system wide progress stage notifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 16/16] fs: error out when writing on read-only file system
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: imxwd: get and enable clock
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 04/12] RISC-V: support multi-image for all machines
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] mci: atmel_mci: add PBL support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 04/12] RISC-V: support multi-image for all machines
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: demote reset reason print to debug level
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: introduce global.endianness variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: qemu-malta: use generic syscon reset driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master 1/2] sandbox: watchdog: don't return positive values from set_timeout
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] scripts: imx-usb-loader: print excluded USB device message only on verbose
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 1/1] Zynq: add support to chainload another barebox
  • From: Michael Graichen <michael.graichen@xxxxxxxxxxx>
• Re: Are there any operations may influence WFI instruction?
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Are there any operations may influence WFI instruction?
  • From: "jameszxj" <jameszxj@xxxxxxxxx>
• [PATCH] fixup! fastboot/dfu: use system partitions as fall back
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] slice: reschedule bthreads doing File I/O in command context
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 0/4] usbgadget: add support for USB mass storage gadget
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] usbgadget: add support for USB mass storage gadget
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] usbgadget: refactor usbgadget_register to accept array
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] bthread: implement basic Linux-like completion API
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! common: add generic system partitions interface
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 09/15] usbgadget: autostart: fix indeterminism around usbgadget.autostart
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 13/15] file_list: add file_list_detect_all()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 11/15] fastboot/dfu: use system partitions as fall back
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 10/15] usbgadget: allow DFU and Fastboot functions to coexist
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 15/15] fs: error out when writing on read-only file system
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 07/15] fastboot: handle ill-named partitions gracefully
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 14/15] common: make FILE_LIST feature unconditional
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 08/15] usb: gadget: dfu: change status message to info log level
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 03/15] string: implement strstarts along with strends
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 05/15] param: introduce file-list parameter type
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 00/15] USB: gadget: refactor to allow easier extension
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 06/15] common: add generic system partitions interface
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 12/15] bbu: add function to directly add handlers into file_list
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 01/15] show_progress: add system wide progress stage notifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 02/15] common: console: add log_writefile to write log into new file
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 04/15] vsprintf: introduce %m shorthand for "%s", strerror(errno)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] scripts: imx-usb-loader: print excluded USB device message only on verbose
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] scripts: imx-usb-loader: print USB VID/PID of excluded devices
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] scripts: imx-usb-loader: print USB VID/PID of excluded devices
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] scripts: imx-usb-loader: print USB VID/PID of excluded devices
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] scripts: imx-usb-loader: print excluded USB device message only on verbose
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] scripts: imx-usb-loader: print excluded USB device message only on verbose
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 2/2] scripts: imx-usb-loader: print USB VID/PID of excluded devices
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH 1/3] fixup! common: add initial barebox deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] fixup! common: add initial barebox deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] fixup! common: add initial barebox deep-probe support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] fixup! common: add initial barebox deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/3] fixup! ARM: boards: mx6-sabrelite: add deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/3] fixup! ARM: i.MX Phytec physom: Add deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• AW: [PATCH 1/1] added support for zynq7000-fpga-manager
  • From: Michael Graichen <michael.graichen@xxxxxxxxxxx>
• Re: [PATCH] scripts/spdxcheck.py: Use Python 3
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/spdxcheck.py: Use Python 3
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: introduce global.endianness variable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] MIPS: qemu-malta: use generic syscon reset driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] scripts/spdxcheck.py: Use Python 3
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 09/12] gpio: generic: sync with upstream Linux gpio-mmio driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/12] RISC-V: erizo: restrict to RV32I
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/12] RISC-V: support multi-image for all machines
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 12/12] RISC-V: sifive: add HiFive board support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/12] clk: add SiFive PRCI clock controller support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/12] serial: implement SiFive UART support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/12] RISC-V: add SBI based cpuinfo
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/12] gpio: add SiFive GPIO controller support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/12] gpio: gpio-generic-platform: remove unused non-DT support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/12] debug_ll: support <asm/debug_ll.h> to get rid of mach directories
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 11/12] net: macb: add SiFive support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] startup: introduce global.endianness variable
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH master 2/2] Documentation: user: watchdog: sync with current state
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 1/2] sandbox: watchdog: don't return positive values from set_timeout
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 09/17] common: add initial barebox deep-probe support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] MIPS: qemu-malta: use generic syscon reset driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 6/6] ARM: at91: sama5d3: add multiimage support for the microchip-ksz9477-evb
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] ARM: at91: sama5d3: add multiimage support for the microchip-ksz9477-evb
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] ARM: at91: sama5d3: add multiimage support for the microchip-ksz9477-evb
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] ARM: at91: add sama5d3_lowlevel_init() helpers
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/6] mci: atmel_mci: add PBL support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 6/6] ARM: at91: sama5d3: add multiimage support for the microchip-ksz9477-evb
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] ARM: at91: add __sama5d3_stashed_bootrom_r4 helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 3/6] ARM: at91: ddramc: add sama5d3_barebox_entry() handler
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] mci: atmel_mci: add PBL support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: demote reset reason print to debug level
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• imx6 nand: dbbt version/layout
  • From: "Middelschulte, Leif" <Leif.Middelschulte@xxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: demote reset reason print to debug level
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Documentation: some extra steps requires for DHCP network configuration for sandbox on the host OS
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: [PATCH v2] Documentation: some extra steps requires for DHCP network configuration for sandbox on the host OS
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• [PATCH v2] Documentation: some extra steps requires for DHCP network configuration for sandbox on the host OS
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: [PATCH] Documentation: sandbox.rst: added dhcp network configuration
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: sandbox.rst: added dhcp network configuration
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master] usb: dwc2: increase timeout for waiting on host mode
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH master] usb: dwc2: increase timeout for waiting on host mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master] usb: dwc2: increase timeout for waiting on host mode
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH master] usb: dwc2: increase timeout for waiting on host mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: RFC: types conflicts
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• [PATCH] Documentation: sandbox.rst: added dhcp network configuration
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: [PATCH 5/8] of: add reserved_mem_read initcall
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 8/8] PBL: enable LIBFDT for OP-TEE early loading
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 6/8] pbl: fdt: add support to parse reserved mem
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 5/8] of: add reserved_mem_read initcall
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/8] of: add flag to not create resmem DT entries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/8] ARM: mmu: use reserve mem entries to modify maps
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: mmu-early: map no-map entries XN & uncached
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] of: export of_get_reserve_map
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] of: reserve: add xn flag mem entries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/8] ARM: mmu: use reserve mem entries to modify maps
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/8] of: reserve: add xn flag mem entries
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 5/8] of: add reserved_mem_read initcall
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 4/8] of: add flag to not create resmem DT entries
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 8/8] PBL: enable LIBFDT for OP-TEE early loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 7/8] ARM: mmu-early: map no-map entries XN & uncached
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 6/8] pbl: fdt: add support to parse reserved mem
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/8] of: export of_get_reserve_map
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: nand_bbt: Skip bad blocks when searching for the BBT in NAND
  • From: Stefan Riedmüller <S.Riedmueller@xxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• [PATCH] watchdog: imxwd: get and enable clock
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: RFC: types conflicts
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v4 00/17] barebox deep probe support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 09/17] common: add initial barebox deep-probe support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fs: Fix link_path_walk to return -ENOENT on empty path
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] Documentation: kvx: Fix broken link
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] common: console_common: Replace vsprintf with vsnprintf
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• [BUG] Stack buffer overflow WRITE of size 1 in barebox_printf function
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• [PATCH v2] usb: storage: retry for up to 10s on lengthy HDD spin up
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/17] of: platform: Keep track of populated platform devices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 16/17] ARM: i.MX Phytec physom: convert to board driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/17] of: base: move clock init from of_probe() to barebox_register_of()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/17] common: Explicitly probe consoles earlier with deep probe
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/17] of: platform: remove check of already added devices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/17] of: Set of_chosen and of_model earlier
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 15/17] ARM: boards: mx6-sabrelite: add deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/17] ARM: i.MX: esdctl: add deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/17] common: add initial barebox deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/17] imx53: remove unused imx53_add_nand
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/17] initcall: add of_populate_initcall
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/17] of: base: move memory init from DT to initcall
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 14/17] ARM: stm32mp: ddrctrl: add deep-probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/17] of: implement of_get_stdoutpath()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v4 00/17] barebox deep probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/17] pinctrl: Add deep probe support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/17] pinctrl: Find controller node first
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts/spdxcheck.py: Use Python 3
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/4] pci: add EFI PCI root bridge IO protocol driver
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/4] PCI: support PCI BIOS preassigned buses
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 4/4] watchdog: add support for Intel TCO watchdog timer
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 0/4] x86: add EFI PCI host and iTCO watchdog support
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/4] x86: add DMA support
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: i.MX: Update sabresdb dcd data from U-Boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• v2021.04.0
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: AT91: Add skov-arm9cpu board support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: RISC-V: erizo: large gap between bss and stack regions
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] RISC-V: board-dt-2nd: add PBL console support for virt
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 02/14] common: console: add log_dprint to print to file descriptor
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 01/14] show_progress: add system wide progress stage notifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 01/14] show_progress: add system wide progress stage notifier
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 02/14] common: console: add log_dprint to print to file descriptor
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] RISC-V: board-dt-2nd: add PBL console support for virt
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: nand_bbt: Skip bad blocks when searching for the BBT in NAND
  • From: "sha@xxxxxxxxxxxxxx" <sha@xxxxxxxxxxxxxx>
• [PATCH] bareboximd: Use mmap when possibly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mtd: nand_bbt: Skip bad blocks when searching for the BBT in NAND
  • From: Stefan Riedmüller <S.Riedmueller@xxxxxxxxx>
• [PATCH v2 2/2] of: introduce global.linux.bootargs_append
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] of: fix up /chosen node even when there are no bootargs
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: RISC-V: erizo: large gap between bss and stack regions
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: RISC-V: erizo: large gap between bss and stack regions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] ARM: AT91: Add skov-arm9cpu board support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: AT91: Add skov-arm9cpu board support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: RISC-V: erizo: large gap between bss and stack regions
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: RISC-V: erizo: large gap between bss and stack regions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 06/14] common: add generic machine partitions interface
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 06/14] common: add generic machine partitions interface
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: RISC-V: erizo: large gap between bss and stack regions
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• RISC-V: erizo: large gap between bss and stack regions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: network configuration setup - dhcp
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• network configuration setup - dhcp
  • From: Neeraj Pal <neerajpal09@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• [PATCH] ARM: i.MX: Add support for Skov i.MX6 boards
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: convert early gpio value accessors to static inline functions
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Add missing braces
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: convert early gpio value accessors to static inline functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Add missing braces
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: Fix Kamstrup mx7 concentrator default cfg
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• [PATCH] pwm: add pwm-atmel from Linux kernel 4.14
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] atmel_lcdfb: fix atmel,lcd-wiring-mode; BGR => BRG
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] of: introduce global.linux.bootargs_overwrite
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: Add missing braces
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] clk: divider: fix divider setting with CLK_SET_RATE_PARENT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] of: introduce global.linux.bootargs_overwrite
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH master] RISC-V: boot: uncompress: determine piggy data bounds before relocation
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: pbl: uncompress: add comment explaining order of operations
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] sandbox: env: set nv.autoboot=abort to drop to shell
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: Add qemu instructions for OpenRISC
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX7/8M: reliably detect serial boot
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] resource: enable use of iomem command on EFI systems
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] edit: don't change terminal mode if sedit would fail to read file
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: pl061: implement gpio_ops::get_direction
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master 1/2] virtio: pci: fix 64-bit incompatibility
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] video: bochs: pci: fix unterminated PCI device table
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH 1/5] gpiolib: add Linux-like gpiod_get() helper
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] common: add option for shipping KCONFIG_CONFIG as /env/data/config
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND] doc: qemu-virt64: fix reST literal block syntax
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] of: introduce global.linux.bootargs_overwrite
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] mci: atmel_mci: add PBL support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 13/14] file_list: add file_list_detect_all()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 12/14] bbu: add function to directly add handlers into file_list
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/14] common: add generic machine partitions interface
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 11/14] fastboot/dfu: use machine partitions as fall back
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/14] common: console: add log_dprint to print to file descriptor
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/14] fastboot: handle ill-named partitions gracefully
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/14] usb: gadget: dfu: change status message to info log level
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/14] param: introduce file-list parameter type
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/14] vsprintf: introduce %m shorthand for "%s", strerror(errno)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/14] usbgadget: autostart: fix indeterminism around usbgadget.autostart
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 00/14] usb: gadget: refactor to allow easier extension
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/14] string: implement strstarts along with strends
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/14] usbgadget: allow DFU and Fastboot functions to coexist
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 14/14] common: make FILE_LIST feature unconditional
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/14] show_progress: add system wide progress stage notifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX7/8M: reliably detect serial boot
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] power: reset: add GPIO restart driver
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX: Kamstrup mx7 concentrator board support
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH 09/17] test: add basic barebox self-test infrastructure
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH 04/17] MIPS: qemu-malta: generate swapped image as part of multi-image build
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 04/17] MIPS: qemu-malta: generate swapped image as part of multi-image build
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH] fixup! common: add option for shipping KCONFIG_CONFIG as /env/data/config
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! common: add option for shipping KCONFIG_CONFIG as /env/data/config
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 09/17] test: add basic barebox self-test infrastructure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 11/17] test: add labgrid configs for some emulated targets
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/17] MIPS: qemu-malta: replace board code with syscon-reboot
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 16/17] test: add bthread test
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/17] kbuild: add install target
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/17] Documentation: boards: RISC-V: update TinyEMU support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 13/17] test: support running labgrid-pytest from out-of-tree build directory
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/17] openrisc: set default KBUILD_IMAGE
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/17] test: self: port Linux printf kselftest
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>