Add variant for 512MB RAM board.
Two firmware files will be generated - one for 256MB and 512MB
respectively; the choice for shipment has to be done and depends on the
underlying hardware.
Signed-off-by: Holger Assmann <h.assmann@xxxxxxxxxxxxxx>
v4 ARM: webasto-ccbv2: Add variant with 512MB RAM
---
v3 -> v4:
by Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>:
- give both *.imxcfg their respective entry points
v2 -> v3:
by Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>:
- keep omitting RAM-size-dependent handling in lowlevel.c
- rectify flash header handling in Makefile.imx
v1 -> v2:
by Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>:
- just ship one single firmware version, depending on the underlying
board variant
by Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>:
- account for the 512MB variant by hard-coding memsize == SZ_512
...sh-header-imx6ul-webasto-ccbv2-256.imxcfg} | 0
...ash-header-imx6ul-webasto-ccbv2-512.imxcfg | 88 +++++++++++++++++++
arch/arm/boards/webasto-ccbv2/lowlevel.c | 18 +++-
images/Makefile.imx | 4 +-
4 files changed, 107 insertions(+), 3 deletions(-)
rename arch/arm/boards/webasto-ccbv2/{flash-header-imx6ul-webasto-ccbv2.imxcfg => flash-header-imx6ul-webasto-ccbv2-256.imxcfg} (100%)
create mode 100644 arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512.imxcfg
diff --git a/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2.imxcfg b/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-256.imxcfg
similarity index 100%
rename from arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2.imxcfg
rename to arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-256.imxcfg
diff --git a/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512.imxcfg b/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512.imxcfg
new file mode 100644
index 0000000000..d438a665f1
--- /dev/null
+++ b/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512.imxcfg
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+loadaddr 0x80000000
+soc imx6
+ivtofs 0x400
+
+/* Enable all clocks */
+wm 32 0x020c4068 0xffffffff
+wm 32 0x020c406c 0xffffffff
+wm 32 0x020c4070 0xffffffff
+wm 32 0x020c4074 0xffffffff
+wm 32 0x020c4078 0xffffffff
+wm 32 0x020c407c 0xffffffff
+wm 32 0x020c4080 0xffffffff
+
+/* IOMUX */
+/* DDR IO type */
+wm 32 0x020E04B4 0x000C0000
+wm 32 0x020E04AC 0x00000000
+/* Clock */
+wm 32 0x020E027C 0x00000028
+/* Control */
+wm 32 0x020E0250 0x00000028
+wm 32 0x020E024C 0x00000028
+wm 32 0x020E0490 0x00000028
+wm 32 0x020E0288 0x00000028
+wm 32 0x020E0270 0x00000000
+wm 32 0x020E0260 0x00000028
+wm 32 0x020E0264 0x00000028
+wm 32 0x020E04A0 0x00000028
+/* Data strobe */
+wm 32 0x020E0494 0x00020000
+wm 32 0x020E0280 0x00000028
+wm 32 0x020E0284 0x00000028
+/* Data */
+wm 32 0x020E04B0 0x00020000
+wm 32 0x020E0498 0x00000028
+wm 32 0x020E04A4 0x00000028
+wm 32 0x020E0244 0x00000028
+wm 32 0x020E0248 0x00000028
+
+/* DDR Controller registers */
+wm 32 0x021B001C 0x00008000
+wm 32 0x021B0800 0xA1390003
+/* Calibration values */
+wm 32 0x021B080C 0x00090000
+wm 32 0x021B083C 0x01580158
+wm 32 0x021B0848 0x40405050
+wm 32 0x021B0850 0x4040524C
+wm 32 0x021B081C 0x33333333
+wm 32 0x021B0820 0x33333333
+wm 32 0x021B082C 0xf3333333
+wm 32 0x021B0830 0xf3333333
+/* END of calibration values */
+wm 32 0x021B08C0 0x00921012
+wm 32 0x021B08b8 0x00000800
+
+/* MMDC init */
+wm 32 0x021B0004 0x0002002D
+wm 32 0x021B0008 0x1b333030
+wm 32 0x021B000C 0x676B52F3
+wm 32 0x021B0010 0xB66D0B63
+wm 32 0x021B0014 0x01FF00DB
+/* Consider reducing RALAT (currently set to 5) */
+wm 32 0x021B0018 0x00211740
+wm 32 0x021B001C 0x00008000
+wm 32 0x021B002C 0x000026D2
+wm 32 0x021B0030 0x006B1023
+wm 32 0x021B0040 0x0000004F
+wm 32 0x021B0000 0x84180000
+
+/* Mode registers writes for CS0 */
+wm 32 0x021B001C 0x02008032
+wm 32 0x021B001C 0x00008033
+wm 32 0x021B001C 0x00048031
+wm 32 0x021B001C 0x15208030
+wm 32 0x021B001C 0x04008040
+
+/* Final DDR setup */
+wm 32 0x021B0020 0x00007800
+wm 32 0x021B0818 0x00000227
+wm 32 0x021B0004 0x0002556D
+wm 32 0x021B0404 0x00011006
+wm 32 0x021B001C 0x00000000
+
+/* Disable TZASC bypass */
+wm 32 0x020E4024 0x00000001
+
+#include <mach/habv4-imx6-gencsf.h>
diff --git a/arch/arm/boards/webasto-ccbv2/lowlevel.c b/arch/arm/boards/webasto-ccbv2/lowlevel.c
index 8529ea3735..32117b0a77 100644
--- a/arch/arm/boards/webasto-ccbv2/lowlevel.c
+++ b/arch/arm/boards/webasto-ccbv2/lowlevel.c
@@ -48,7 +48,7 @@ static void noinline start_ccbv2(u32 r0)
*/
if(IS_ENABLED(CONFIG_FIRMWARE_CCBV2_OPTEE)
&& !(r0 > MX6_MMDC_P0_BASE_ADDR
- && r0 < MX6_MMDC_P0_BASE_ADDR + SZ_256M)) {
+ && r0 < MX6_MMDC_P0_BASE_ADDR + SZ_512M)) {
get_builtin_firmware(ccbv2_optee_bin, &tee, &tee_size);
memset((void *)OPTEE_OVERLAY_LOCATION, 0, 0x1000);
@@ -59,7 +59,21 @@ static void noinline start_ccbv2(u32 r0)
imx6ul_barebox_entry(__dtb_z_imx6ul_webasto_ccbv2_start);
}
-ENTRY_FUNCTION(start_imx6ul_ccbv2, r0, r1, r2)
+ENTRY_FUNCTION(start_imx6ul_ccbv2_256m, r0, r1, r2)
+{
+
+ imx6ul_cpu_lowlevel_init();
+
+ arm_setup_stack(0x00910000);
+
+ relocate_to_current_adr();
+ setup_c();
+ barrier();
+
+ start_ccbv2(r0);
+}
+
+ENTRY_FUNCTION(start_imx6ul_ccbv2_512m, r0, r1, r2)
{
imx6ul_cpu_lowlevel_init();
diff --git a/images/Makefile.imx b/images/Makefile.imx
index b892ec0196..67a85fe24e 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -364,7 +364,9 @@ $(call build_imx_habv4img, CONFIG_MACH_TECHNEXION_PICO_HOBBIT, start_imx6ul_pico
$(call build_imx_habv4img, CONFIG_MACH_DIGI_CCIMX6ULSBCPRO, start_imx6ul_ccimx6ulsbcpro, digi-ccimx6ulsom/flash-header-imx6ul-ccimx6ulsbcpro, imx6ul-ccimx6ulsbcpro)
-$(call build_imx_habv4img, CONFIG_MACH_WEBASTO_CCBV2, start_imx6ul_ccbv2, webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2, imx6ul-webasto-ccbv2)
+$(call build_imx_habv4img, CONFIG_MACH_WEBASTO_CCBV2, start_imx6ul_ccbv2_256m, webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-256, imx6ul-webasto-ccbv2-256m)
+
+$(call build_imx_habv4img, CONFIG_MACH_WEBASTO_CCBV2, start_imx6ul_ccbv2_512m, webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512, imx6ul-webasto-ccbv2-512m)
# ----------------------- vf6xx based boards ---------------------------
pblb-$(CONFIG_MACH_VF610_TWR) += start_vf610_twr
--
2.29.2
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
