On Tue, Apr 27, 2021 at 10:23:08PM +0200, Ahmad Fatoum wrote:
> The Ethernet controller on the SiFive SoCs needs some special TX clock
> setup. Port the relevant Linux v5.12 bits to enable it.
>
> Tested on qemu-system-riscv64 -M sifive_u with dhcp.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
> ---
> drivers/net/macb.c | 113 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 113 insertions(+)
>
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 14a0b45322bf..9c4fdbd5bc4f 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -52,6 +52,17 @@
> #define TX_RING_BYTES (sizeof(struct macb_dma_desc) * TX_RING_SIZE)
> #define GEM_Q1_DESC_BYTES (sizeof(struct macb_dma_desc) * GEM_Q1_DESCS)
>
> +/* This structure is only used for MACB on SiFive FU540 devices */
> +struct sifive_fu540_macb_mgmt {
> + void __iomem *reg;
> + unsigned long rate;
> + struct clk clk;
> +};
> +
> +struct macb_config {
> + int (*txclk_init)(struct device_d *dev, struct clk **tx_clk);
> +};
> +
> struct macb_device {
> void __iomem *regs;
>
> @@ -666,12 +677,101 @@ static void macb_init_rx_buffer_size(struct macb_device *bp, size_t size)
> size, bp->rx_buffer_size);
> }
>
> +static struct sifive_fu540_macb_mgmt *mgmt;
> +
> +static unsigned long fu540_macb_tx_recalc_rate(struct clk *clk,
> + unsigned long parent_rate)
> +{
> + return mgmt->rate;
> +}
Unfortunately I had to drop this one. The macb driver is used by some of
the old at91 configs which have their own clk implementation. Among
other things there is no recalc_rate hook.
Can we place the clk code inside a #ifdef CONFIG_COMMON_CLK?
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
