I wanted to add some additional commands to the env for a new board. The barebox docs have this: The default environment is composed from different directories during compilation: defaultenv/.... ... arch/$ARCH/boards/<board>/env -> board specific overlay Which made me think that putting an "env" directory in the board directory would automatically add it to the environment. It seemed like a few boards I looked at did this and nothing more. But no, this does not work. I see two ways to add extra env. One is to reference a path in CONFIG_DEFAULT_ENVIRONMENT_PATH. The other is to add a path to bbenv-y in the board's Makefile and then defaultenv_append_directory() that linked in data in the board code. But it seems like some boards do neither! How do they work? AFAICT, the answer is they don't work. I tried to do an exhaustive survey of board envs. I found 98 env directories used by 95 boards. 57 of those boards use a manual defaultenv_append_directory(). There are 39 env directories not added this way (efika-mx-smartbook has two env dirs, one in the makefile and one not, thus 57 + 39 - 1 = 95). Of the 39 env dirs not added in board code, 27 are referenced in a defconfig file in CONFIG_DEFAULT_ENVIRONMENT_PATH. And thus 12 env dirs appear to have no use in barebox. delphi-poc20 appears to not even be a board, having just an env file, no code, no references I could, and added in a commit for another board. Mistake? The 12 boards with apparently unused envs: chumby_falconwing crystalfontz-cfa10036 datamodul-edm-qmx6 delphi-poc20 dss11 efika-mx-smartbook generic karo-tx25 karo-tx51 mx31moboard skov-imx6 technexion-wandboard An issue with CONFIG_DEFAULT_ENVIRONMENT_PATH is that it applies to all boards in a config. If multiple boards are built at once, e.g. imx_v7_defconfig, then there is no way for each board to have a different extra env this way. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox