Re: [PATCH v1] ARM: protonic: vicut1: disable on-die termination to fix PHY bootstrapping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 18, 2021 at 10:37:07AM +0200, Oleksij Rempel wrote:
> If on-die termination is enabled, the RXC pin of iMX6 will be pulled
> high. Since we already have an 10K pull-down on board, the RXC level on
> PHY reset will be ~800mV, which is mostly interpreted as 1. On some
> reboots we get 0 instead and kernel can't detect the PHY properly.
> 
> Since the default 0x020e07ac value is 0, it is sufficient to remove this
> entry from the affected imxcfg files.
> 
> Since we get stable 0 on pin PHYADDR[2], the PHY address is changed from
> 4 to 0.
> 
> Reported-by: Robin van der Gracht <robin@xxxxxxxxxxx>
> Fixes: 00adc1e33ef8 ("ARM: add imx6 based Protonic boads")
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg | 1 -
>  1 file changed, 1 deletion(-)

Applied, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux