Hi Holger,
it looks like the changes to arch/arm/boards/webasto-ccbv2/lowlevel.c
and images/Makefile.imx have gone missing, so unfortunately the new
flash header isn't used and the old flash header can no longer be used
since images/Makefile.imx was not adjusted.
Regards,
Rouven
On Mon, 2021-05-17 at 18:03 +0200, Holger Assmann wrote:
> Add variant for 512MB RAM board.
>
> v1 -> v2:
>
> by Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>:
> - just ship one single firmware version, depending on the underlying
> board variant
>
> by Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>:
> - account for the 512MB variant by hard-coding memsize == SZ_512
>
> Signed-off-by: Holger Assmann <h.assmann@xxxxxxxxxxxxxx>
> ---
> ...sh-header-imx6ul-webasto-ccbv2-256.imxcfg} | 0
> ...ash-header-imx6ul-webasto-ccbv2-512.imxcfg | 88 +++++++++++++++++++
> arch/arm/boards/webasto-ccbv2/lowlevel.c | 2 +-
> 3 files changed, 89 insertions(+), 1 deletion(-)
> rename arch/arm/boards/webasto-ccbv2/{flash-header-imx6ul-webasto-ccbv2.imxcfg => flash-header-imx6ul-webasto-ccbv2-256.imxcfg} (100%)
> create mode 100644 arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512.imxcfg
>
> diff --git a/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2.imxcfg b/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-256.imxcfg
> similarity index 100%
> rename from arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2.imxcfg
> rename to arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-256.imxcfg
> diff --git a/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512.imxcfg b/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512.imxcfg
> new file mode 100644
> index 0000000000..d438a665f1
> --- /dev/null
> +++ b/arch/arm/boards/webasto-ccbv2/flash-header-imx6ul-webasto-ccbv2-512.imxcfg
> @@ -0,0 +1,88 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +loadaddr 0x80000000
> +soc imx6
> +ivtofs 0x400
> +
> +/* Enable all clocks */
> +wm 32 0x020c4068 0xffffffff
> +wm 32 0x020c406c 0xffffffff
> +wm 32 0x020c4070 0xffffffff
> +wm 32 0x020c4074 0xffffffff
> +wm 32 0x020c4078 0xffffffff
> +wm 32 0x020c407c 0xffffffff
> +wm 32 0x020c4080 0xffffffff
> +
> +/* IOMUX */
> +/* DDR IO type */
> +wm 32 0x020E04B4 0x000C0000
> +wm 32 0x020E04AC 0x00000000
> +/* Clock */
> +wm 32 0x020E027C 0x00000028
> +/* Control */
> +wm 32 0x020E0250 0x00000028
> +wm 32 0x020E024C 0x00000028
> +wm 32 0x020E0490 0x00000028
> +wm 32 0x020E0288 0x00000028
> +wm 32 0x020E0270 0x00000000
> +wm 32 0x020E0260 0x00000028
> +wm 32 0x020E0264 0x00000028
> +wm 32 0x020E04A0 0x00000028
> +/* Data strobe */
> +wm 32 0x020E0494 0x00020000
> +wm 32 0x020E0280 0x00000028
> +wm 32 0x020E0284 0x00000028
> +/* Data */
> +wm 32 0x020E04B0 0x00020000
> +wm 32 0x020E0498 0x00000028
> +wm 32 0x020E04A4 0x00000028
> +wm 32 0x020E0244 0x00000028
> +wm 32 0x020E0248 0x00000028
> +
> +/* DDR Controller registers */
> +wm 32 0x021B001C 0x00008000
> +wm 32 0x021B0800 0xA1390003
> +/* Calibration values */
> +wm 32 0x021B080C 0x00090000
> +wm 32 0x021B083C 0x01580158
> +wm 32 0x021B0848 0x40405050
> +wm 32 0x021B0850 0x4040524C
> +wm 32 0x021B081C 0x33333333
> +wm 32 0x021B0820 0x33333333
> +wm 32 0x021B082C 0xf3333333
> +wm 32 0x021B0830 0xf3333333
> +/* END of calibration values */
> +wm 32 0x021B08C0 0x00921012
> +wm 32 0x021B08b8 0x00000800
> +
> +/* MMDC init */
> +wm 32 0x021B0004 0x0002002D
> +wm 32 0x021B0008 0x1b333030
> +wm 32 0x021B000C 0x676B52F3
> +wm 32 0x021B0010 0xB66D0B63
> +wm 32 0x021B0014 0x01FF00DB
> +/* Consider reducing RALAT (currently set to 5) */
> +wm 32 0x021B0018 0x00211740
> +wm 32 0x021B001C 0x00008000
> +wm 32 0x021B002C 0x000026D2
> +wm 32 0x021B0030 0x006B1023
> +wm 32 0x021B0040 0x0000004F
> +wm 32 0x021B0000 0x84180000
> +
> +/* Mode registers writes for CS0 */
> +wm 32 0x021B001C 0x02008032
> +wm 32 0x021B001C 0x00008033
> +wm 32 0x021B001C 0x00048031
> +wm 32 0x021B001C 0x15208030
> +wm 32 0x021B001C 0x04008040
> +
> +/* Final DDR setup */
> +wm 32 0x021B0020 0x00007800
> +wm 32 0x021B0818 0x00000227
> +wm 32 0x021B0004 0x0002556D
> +wm 32 0x021B0404 0x00011006
> +wm 32 0x021B001C 0x00000000
> +
> +/* Disable TZASC bypass */
> +wm 32 0x020E4024 0x00000001
> +
> +#include <mach/habv4-imx6-gencsf.h>
> diff --git a/arch/arm/boards/webasto-ccbv2/lowlevel.c b/arch/arm/boards/webasto-ccbv2/lowlevel.c
> index 8529ea3735..5b6115bed5 100644
> --- a/arch/arm/boards/webasto-ccbv2/lowlevel.c
> +++ b/arch/arm/boards/webasto-ccbv2/lowlevel.c
> @@ -48,7 +48,7 @@ static void noinline start_ccbv2(u32 r0)
> */
> if(IS_ENABLED(CONFIG_FIRMWARE_CCBV2_OPTEE)
> && !(r0 > MX6_MMDC_P0_BASE_ADDR
> - && r0 < MX6_MMDC_P0_BASE_ADDR + SZ_256M)) {
> + && r0 < MX6_MMDC_P0_BASE_ADDR + SZ_512M)) {
> get_builtin_firmware(ccbv2_optee_bin, &tee, &tee_size);
>
> memset((void *)OPTEE_OVERLAY_LOCATION, 0, 0x1000);
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
