Hello Antony,
On 07.05.21 16:25, Antony Pavlov wrote:
>> I would really like to have a riscv{32,64}_defconfig that can just build all boards
>> at once. Do you know if this could be dynamically determined?
>
> At the moment I have not answer.
> I'll try to investigate dynamic mode determination, it's very attractive idea.
>
> On the other hand compile time mode selection is not the show stopper for
> "one defconfig to build them all": we have to make STACK_SIZE and MALLOC_SIZE
> per-board parameters not per-defconfig parameters like now.
>
> If we could make STACK_SIZE and MALLOC_SIZE per-board compile-time parameters then
> we can make RISC-V mode per-board compile-time parameter too. Is this solution
> acceptable?
MALLOC_SIZE can be set as 0 and barebox will determine it based on
membase + memsize that are set by PBL.
STACK_SIZE must be set per Kconfig, but I think even a generous default stack
size should accommodate all targets.
If we do the same for RISC-V mode that would probably mean having
two functions barebox_riscv_machine_entry() and barebox_riscv_supervisor_entry()
in PBL that take care to pass the correct info to barebox proper.
Apparently, you can determine mode if you catch exceptions:
https://forums.sifive.com/t/how-to-determine-the-current-execution-privilege-mode/2823
We don't yet install exception handlers in barebox, but I am fine with using
different PBL common code entry functions.
What do you think?
Cheers,
Ahmad
>
>>> +
>>> source "arch/riscv/Kconfig.socs"
>>>
>>> config CPU_SUPPORTS_32BIT_KERNEL
>>> @@ -97,14 +109,4 @@ config NMON_HELP
>>> Say yes here to get the nmon commands message on
>>> every nmon start.
>>>
>>> -# set if we run in machine mode, cleared if we run in supervisor mode
>>> -config RISCV_M_MODE
>>> - bool
>>> -
>>> -# set if we are running in S-mode and can use SBI calls
>>> -config RISCV_SBI
>>> - bool
>>> - depends on !RISCV_M_MODE
>>> - default y
>>> -
>>> endmenu
>>> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
>>> index c6875738d0..f767942f34 100644
>>> --- a/arch/riscv/Kconfig.socs
>>> +++ b/arch/riscv/Kconfig.socs
>>> @@ -3,10 +3,10 @@ menu "SoC selection"
>>> config SOC_ERIZO
>>> bool "Erizo SoC"
>>> depends on ARCH_RV32I
>>> + depends on RISCV_M_MODE
>>> select HAS_ASM_DEBUG_LL
>>> select HAS_NMON
>>> select USE_COMPRESSED_DTB
>>> - select RISCV_M_MODE
>>> select RISCV_TIMER
>>>
>>> config BOARD_ERIZO_GENERIC
>>> @@ -15,6 +15,7 @@ config BOARD_ERIZO_GENERIC
>>>
>>> config SOC_VIRT
>>> bool "QEMU Virt Machine"
>>> + depends on RISCV_SBI
>>> select BOARD_RISCV_GENERIC_DT
>>> select CLINT_TIMER
>>> help
>>> @@ -23,6 +24,7 @@ config SOC_VIRT
>>>
>>> config SOC_SIFIVE
>>> bool "SiFive SoCs"
>>> + depends on RISCV_SBI
>>> select CLK_SIFIVE
>>> select CLK_SIFIVE_PRCI
>>> select RISCV_TIMER
>>> diff --git a/arch/riscv/configs/erizo_generic_defconfig b/arch/riscv/configs/erizo_generic_defconfig
>>> index 247a179130..16168eef66 100644
>>> --- a/arch/riscv/configs/erizo_generic_defconfig
>>> +++ b/arch/riscv/configs/erizo_generic_defconfig
>>> @@ -1,3 +1,4 @@
>>> +CONFIG_RISCV_M_MODE=y
>>> CONFIG_SOC_ERIZO=y
>>> # CONFIG_GLOBALVAR is not set
>>> CONFIG_STACK_SIZE=0x20000
>>>
>>
>> --
>> Pengutronix e.K. | |
>> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
