[PATCH v2 2/5] RISC-V: cpuinfo: return some output for non-SBI systems as well

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If barebox managed to actually execute the cpuinfo command, it probably
means that it's assumption which instructon set is being used and
whether it runs in machine or supervisor mode is correct.

Add that output to cpuinfo, so it shows at least something for non-SBI
configurations.

Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
v1 -> v2:
  - new patch after feedback from Antony
---
 arch/riscv/include/asm/sbi.h |  8 ++----
 arch/riscv/lib/cpuinfo.c     | 55 +++++++++++++++++++++++++-----------
 commands/Kconfig             |  4 +--
 3 files changed, 43 insertions(+), 24 deletions(-)

diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index ab1fc9a128e5..eb4018de382e 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -9,9 +9,7 @@
 
 #include <linux/types.h>
 
-#ifdef CONFIG_RISCV_SBI
 enum sbi_ext_id {
-#ifdef CONFIG_RISCV_SBI_V01
 	SBI_EXT_0_1_SET_TIMER = 0x0,
 	SBI_EXT_0_1_CONSOLE_PUTCHAR = 0x1,
 	SBI_EXT_0_1_CONSOLE_GETCHAR = 0x2,
@@ -21,7 +19,7 @@ enum sbi_ext_id {
 	SBI_EXT_0_1_REMOTE_SFENCE_VMA = 0x6,
 	SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID = 0x7,
 	SBI_EXT_0_1_SHUTDOWN = 0x8,
-#endif
+
 	SBI_EXT_BASE = 0x10,
 	SBI_EXT_TIME = 0x54494D45,
 	SBI_EXT_IPI = 0x735049,
@@ -167,7 +165,5 @@ static inline unsigned long sbi_minor_version(void)
 }
 
 int sbi_err_map_linux_errno(int err);
-#else /* CONFIG_RISCV_SBI */
-static inline int sbi_remote_fence_i(const unsigned long *hart_mask) { return -1; }
-#endif /* CONFIG_RISCV_SBI */
+
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/lib/cpuinfo.c b/arch/riscv/lib/cpuinfo.c
index 21b99a990a1a..16305e6c4d96 100644
--- a/arch/riscv/lib/cpuinfo.c
+++ b/arch/riscv/lib/cpuinfo.c
@@ -2,6 +2,7 @@
 #include <common.h>
 #include <command.h>
 #include <asm/sbi.h>
+#include <asm/system.h>
 
 static const char *implementations[] = {
 	[0] = "\"Berkeley Boot Loader (BBL)\" ",
@@ -12,34 +13,56 @@ static const char *implementations[] = {
 	[5] = "\"Diosix\" ",
 };
 
+static const char *modes[] = {
+	[RISCV_U_MODE] = "U",
+	[RISCV_S_MODE] = "S",
+	[RISCV_HS_MODE] = "HS",
+	[RISCV_M_MODE] = "M",
+};
+
 static int do_cpuinfo(int argc, char *argv[])
 {
 	const char *implementation = "";
+	enum riscv_mode mode;
 	unsigned long impid;
 
-	printf("SBI specification v%lu.%lu detected\n",
-	       sbi_major_version(), sbi_minor_version());
+	mode = riscv_mode() & RISCV_MODE_MASK;
+
+	printf("%s barebox for %s-Mode\n",
+	       IS_ENABLED(CONFIG_ARCH_RV64I) ? "RV64I" : "RV32I",
+	       modes[mode]);
+
+	switch (mode) {
+	case RISCV_S_MODE:
+		if (!IS_ENABLED(CONFIG_RISCV_SBI))
+			break;
+		printf("SBI specification v%lu.%lu detected\n",
+		       sbi_major_version(), sbi_minor_version());
 
-	if (sbi_spec_is_0_1())
-		return 0;
+		if (sbi_spec_is_0_1())
+			return 0;
 
-	impid = __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_ID);
-	if (impid < ARRAY_SIZE(implementations))
-		implementation = implementations[impid];
+		impid = __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_ID);
+		if (impid < ARRAY_SIZE(implementations))
+			implementation = implementations[impid];
 
-	printf("SBI implementation ID=0x%lx %sVersion=0x%lx\n",
-	       impid, implementation, __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_VERSION));
+		printf("SBI implementation ID=0x%lx %sVersion=0x%lx\n",
+		       impid, implementation, __sbi_base_ecall(SBI_EXT_BASE_GET_IMP_VERSION));
 
-	printf("SBI Machine VENDORID=0x%lx ARCHID=0x%lx MIMPID=0x%lx\n",
-	       __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID),
-	       __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID),
-	       __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID));
+		printf("SBI Machine VENDORID=0x%lx ARCHID=0x%lx MIMPID=0x%lx\n",
+		       __sbi_base_ecall(SBI_EXT_BASE_GET_MVENDORID),
+		       __sbi_base_ecall(SBI_EXT_BASE_GET_MARCHID),
+		       __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID));
+		break;
+	default:
+		break;
+	}
 
 	return 0;
 }
 
 BAREBOX_CMD_START(cpuinfo)
 	.cmd            = do_cpuinfo,
-BAREBOX_CMD_DESC("show CPU information")
-BAREBOX_CMD_GROUP(CMD_GRP_INFO)
-	BAREBOX_CMD_END
+	BAREBOX_CMD_DESC("show CPU information")
+	BAREBOX_CMD_GROUP(CMD_GRP_INFO)
+BAREBOX_CMD_END
diff --git a/commands/Kconfig b/commands/Kconfig
index 5ae3cb3dd145..6da68a7f1467 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -47,9 +47,9 @@ config CMD_ARM_CPUINFO
 config CMD_RISCV_CPUINFO
 	bool "cpuinfo command"
 	default y
-	depends on RISCV_SBI
+	depends on RISCV
 	help
-	  Show SBI info about RISC-V CPU
+	  Show info about RISC-V CPU
 
 config CMD_DEVINFO
 	tristate
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux