Hi, On Wed, Apr 14, 2021 at 12:37 AM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote: > > There is more documentation besides the README. For networking see > https://barebox.org/doc/latest/user/networking.html Thank you for the documentation. I read them and configured the values but it is not working, so it may be possible that I am not doing it correctly. > The default barebox boot target is to net boot. It'll try to get > a DHCP address and then load some predefined files over TFTP > (If it fails, it'll tell you which ones). > > If that didn't work, you'll need to tell more about your setup? > What board are you using barebox on? Thank you for the information. At present, I haven't tried it on any board as I am using it as Sandbox but I have BeagleBone Black and Raspberry Pi 3B. > Part of the question reads like you are using it while Linux is > running (sandbox) and some other like you'd run it directly as > bootloader. Also what kind of errors do you get, can you copy them here? Yes, I am trying to execute it as Sandbox and while executing through sudo please find the information given below: sudo ./barebox add stickypage initially unbacked by file barebox 2021.04.0-00056-gaf0f068a6 #1 Fri Apr 16 23:11:01 IST 2021 Board: Sandbox console: registered as cs0 netconsole: registered as netconsole-1 hostfile 7f455b09a000.stickypage.of: registered as character device sandbox-watchdog watchdog.of: probed malloc space: 0x7f4559e21010 -> 0x7f455ae2100f (size 16 MiB) state: New state registered 'state' ERROR: state: No meta data header found ERROR: state: No meta data header found ERROR: state: No meta data header found ERROR: state: Failed to find any valid state copy in any bucket ERROR: state: Failed to read state with format raw, -2 WARNING: state state.of: Failed to load persistent state, continuing with defaults, -2 super: JFFS version 2.2. © 2001-2006 Red Hat, Inc. envfs: no envfs (magic mismatch) - envfs never written? ******************************************************* *** Inconsistent barebox state buckets detected *** *** This is normal for a first boot *** *** barebox will repair them on next poweroff/reset *** ******************************************************* barebox@Sandbox:/ ping google.com ERROR: dns: no nameserver specified in $net.nameserver ping failed: No route to host barebox@Sandbox:/ dhcp WARNING: eth0: No MAC address set. Using random address 9e:47:e0:0b:cb:ab T T T T T T T T T T T T T T T T T T T T dhcp: Connection timed out barebox@Sandbox:/ ping google.com ERROR: dns: no nameserver specified in $net.nameserver ping failed: No route to host barebox@Sandbox:/ barebox@Sandbox:/ devinfo `-- global `-- nv `-- platform `-- machine `-- state.of `-- 7f455b09a000.stickypage.of `-- 0x00000000-0x00000fff ( 4 KiB): /dev/stickypage `-- 0x00000400-0x00000bff ( 2 KiB): /dev/stickypage.env `-- 0x00000c00-0x00000fff ( 1 KiB): /dev/stickypage.state `-- bmode `-- 7f455b09a000.stickypage:partitions.of `-- power.of `-- watchdog.of `-- wdog0 `-- sound.of `-- led.of `-- console0 `-- cs0 `-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/cs0 `-- mem0 `-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/mem `-- netconsole `-- 0x00000000-0xffffffffffffffff ( 0 Bytes): /dev/netconsole-1 `-- tap0 `-- eth0 `-- sdlfb0 `-- devrandom0 `-- chosen:environment.of `-- spi `-- i2c `-- fs `-- ramfs0 `-- devfs0 `-- pstore0 `-- state barebox@Sandbox:/ I am doing ping but it doesn't have any dns entry and route to resolve it. Please let me know for any other information. Thanks and regards, Neeraj _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
