Re: [PATCH v1 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 09, 2021 at 03:11:45PM +0200, Oleksij Rempel wrote:
> This helper should be called from the xloader
> 
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  arch/arm/mach-at91/Kconfig              |  2 +
>  arch/arm/mach-at91/include/mach/xload.h |  2 +
>  arch/arm/mach-at91/xload-mmc.c          | 51 +++++++++++++++++++++++++
>  3 files changed, 55 insertions(+)
> 
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 52eefc7361..0fc8d25111 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -45,6 +45,7 @@ config HAVE_AT91_DDRAMC
>  
>  config AT91_MCI_PBL
>  	bool
> +	depends on MCI_ATMEL_PBL
>  	depends on MCI_ATMEL_SDHCI_PBL
>  	default y
>  
> @@ -599,6 +600,7 @@ config MACH_MICROCHIP_KSZ9477_EVB
>  	bool "Microchip EVB-KSZ9477 Evaluation Kit"
>  	select SOC_SAMA5D3
>  	select OFDEVICE
> +	select MCI_ATMEL_PBL
>  	select COMMON_CLK_OF_PROVIDER
>  	help
>  	  Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit.
> diff --git a/arch/arm/mach-at91/include/mach/xload.h b/arch/arm/mach-at91/include/mach/xload.h
> index 9201e7d0b7..bbc70af210 100644
> --- a/arch/arm/mach-at91/include/mach/xload.h
> +++ b/arch/arm/mach-at91/include/mach/xload.h
> @@ -5,6 +5,8 @@
>  #include <pbl.h>
>  
>  void __noreturn sama5d2_sdhci_start_image(u32 r4);
> +void __noreturn sama5d3_atmci_start_image(u32 r4, unsigned int clock,
> +					  unsigned int slot);
>  
>  int at91_sdhci_bio_init(struct pbl_bio *bio, void __iomem *base);
>  int at91_mci_bio_init(struct pbl_bio *bio, void __iomem *base,
> diff --git a/arch/arm/mach-at91/xload-mmc.c b/arch/arm/mach-at91/xload-mmc.c
> index e9edeccb7f..2e00cfc2a9 100644
> --- a/arch/arm/mach-at91/xload-mmc.c
> +++ b/arch/arm/mach-at91/xload-mmc.c
> @@ -3,6 +3,7 @@
>  #include <mach/sama5_bootsource.h>
>  #include <mach/hardware.h>
>  #include <mach/sama5d2_ll.h>
> +#include <mach/sama5d3_ll.h>
>  #include <mach/gpio.h>
>  #include <linux/sizes.h>
>  #include <asm/cache.h>
> @@ -44,6 +45,23 @@ static const struct sdhci_instance {
>  	},
>  };
>  
> +static const struct atmci_instance {
> +	void __iomem *base;
> +	unsigned id;
> +	u8 periph;
> +	s8 pins[15];
> +} atmci_instances[] = {
> +	[0] = {
> +		.base = IOMEM(SAMA5D3_BASE_HSMCI0),
> +		.id = SAMA5D3_ID_HSMCI0,
> +		.periph = AT91_MUX_PERIPH_A,
> +		.pins = {
> +			AT91_PIN_PD0, AT91_PIN_PD1, AT91_PIN_PD2, AT91_PIN_PD3,
> +			AT91_PIN_PD4, AT91_PIN_PD5, AT91_PIN_PD6, AT91_PIN_PD7,
> +			AT91_PIN_PD8, AT91_PIN_PD9, -1 }
> +	},
> +};

What about SAMA5D3_BASE_HSMCI1? Please either add it here or don't
access it below.

Sascha

> +
>  /**
>   * sama5d2_sdhci_start_image - Load and start an image from FAT-formatted SDHCI
>   * @r4: value of r4 passed by BootROM
> @@ -82,3 +100,36 @@ void __noreturn sama5d2_sdhci_start_image(u32 r4)
>  out_panic:
>  	panic("FAT chainloading failed\n");
>  }
> +
> +void __noreturn sama5d3_atmci_start_image(u32 boot_src, unsigned int clock,
> +					  unsigned int slot)
> +{
> +	void *buf = (void *)SAMA5_DDRCS;
> +	const struct atmci_instance *instance;
> +	struct pbl_bio bio;
> +	const s8 *pin;
> +	int ret;
> +
> +	ret = sama5_bootsource_instance(boot_src);
> +	if (ret > 1)
> +		panic("Couldn't determine boot MCI instance\n");
> +
> +	instance = &atmci_instances[boot_src];
> +
> +	sama5d3_pmc_enable_periph_clock(SAMA5D2_ID_PIOD);
> +	for (pin = instance->pins; *pin >= 0; pin++) {
> +		at91_mux_pio3_pin(IOMEM(SAMA5D3_BASE_PIOD),
> +					 pin_to_mask(*pin), instance->periph, 0);
> +	}
> +
> +	sama5d3_pmc_enable_periph_clock(instance->id);
> +
> +	ret = at91_mci_bio_init(&bio, instance->base, clock, slot);
> +	if (ret)
> +		goto out_panic;
> +
> +	at91_fat_start_image(&bio, buf, SZ_16M, boot_src);
> +
> +out_panic:
> +	panic("FAT chainloading failed\n");
> +}
> -- 
> 2.29.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux